fix(intel): update nand driver to enable Linux OS boot

Update the nand driver SDR mode with the correct timing
and combo-phy configurations to enable the Linux system
boot.

Change-Id: If592680ef359

fix(intel): update nand driver to enable Linux OS boot

Update the nand driver SDR mode with the correct timing
and combo-phy configurations to enable the Linux system
boot.

Change-Id: If592680ef359378574b913b11d466c89389a2606
Signed-off-by: Girisha Dengi <girisha.dengi@altera.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@altera.com>

show more ...

fix(intel): fix SDMMC driver when sdmclk running at 200MHz

When SDMMC sdmclk running at 200MHz setting the sdclk
to 25MHz will fail. so setting the sdclk to 50MHz for
SDMMC.

Change-Id: I56398893717

fix(intel): fix SDMMC driver when sdmclk running at 200MHz

When SDMMC sdmclk running at 200MHz setting the sdclk
to 25MHz will fail. so setting the sdclk to 50MHz for
SDMMC.

Change-Id: I56398893717afe1fa0de167aae532f8b8de03b1c
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@altera.com>

show more ...

fix(intel): fix eMMC driver issues in boot flow on agilex5

Fixed issue where reading the EXT_CSD register via CMD8
with DMA enabled returned 0 value. Updated the read mode
to handle this case correc

fix(intel): fix eMMC driver issues in boot flow on agilex5

Fixed issue where reading the EXT_CSD register via CMD8
with DMA enabled returned 0 value. Updated the read mode
to handle this case correctly.

Added polling for the ICS bit after enabling ICE when
setting the SDCLK rate. Introduced delay to ensure
proper clock stabilization.

Corrected SD_HOST_CLK to data driven from the clock manager
as sdmclk.

eMMC operates in legacy mode, which has a maximum
supported clock rate of 26 MHz. Updated the clock
setting to 25 MHz to meet this requirement.

Change-Id: I4ac2b9b69b5dec2c8166d06c736d9c2c549607de
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@altera.com>

show more ...

feat(mmc): add define for no response

Introduce a new macro definition to represent the response type for
commands that do not expect a response. This is particularly applicable
to commands like Com

feat(mmc): add define for no response

Introduce a new macro definition to represent the response type for
commands that do not expect a response. This is particularly applicable
to commands like Command 0, which is used to reset the card and place it
into the idle state.

Change-Id: I6fe298504a7166ccd7e47c23f88945b2ce064cf9
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

fix(intel): refactor SDMMC driver for Altera products

Refactor to be more robust. Removed duplicated and not used functions.
Add in ADMA read.

Change-Id: I1a5a00397ece6f9ccc5916225ab5317010b01b52
S

fix(intel): refactor SDMMC driver for Altera products

Refactor to be more robust. Removed duplicated and not used functions.
Add in ADMA read.

Change-Id: I1a5a00397ece6f9ccc5916225ab5317010b01b52
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>

show more ...

fix(intel): update preloaded_bl33_base for legacy product

Update preloaded_bl33_base for legacy product for Yocto.

The Yocto Jenkins build was initially configured to build products
where the start

fix(intel): update preloaded_bl33_base for legacy product

Update preloaded_bl33_base for legacy product for Yocto.

The Yocto Jenkins build was initially configured to build products
where the starting of the DDR is from 0x0000 0000. And if there is
no NS_image_offset set, the Jenkins is not able to acquire the correct
address offset to boot up the system. However, in the direct OS boot,
there is no issue as the user shall always include the address offset
during the compilation phase. Otherwise, the code shall execute the
default address offset. Besides that, this also provides the
flexibility to user to customize their SoC design by not restricted
to the default address.

SDMMC block size. It was changed due to the need when boot to Linux.
Kernel.itb size is big thus we have to increase the available reading
block size. Otherwise for normal U-boot and Zephyr it shall not be
reading a big block size to avoid "garbage" data.

Change-Id: I1c2a22db28bf0ada734563e40efd4f5749951273
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>

show more ...

fix(intel): remove redundant BIT_32 macro

BIT_32 macro is already defined as part of the utils_def.h and included
through mmc.h

Suggested-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I7921681e

fix(intel): remove redundant BIT_32 macro

BIT_32 macro is already defined as part of the utils_def.h and included
through mmc.h

Suggested-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I7921681ee9af7d65e8eab5a0bf1d5236ecfed1a4
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

fix(intel): update nand driver to match GHRD design

Update nand driver to match GHRD design, fix row
address calculation method and other misc updates.

Signed-off-by: Girisha Dengi <girisha.dengi@i

fix(intel): update nand driver to match GHRD design

Update nand driver to match GHRD design, fix row
address calculation method and other misc updates.

Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I1cb3dda43e767ba243fbe89bfa18818db321c5c2

show more ...