xref: /rk3399_ARM-atf/plat/arm/board/fvp/include/platform_def.h (revision 82cb2c1ad9897473743f08437d0a3995bed561b9)
1 /*
2  * Copyright (c) 2014-2017, ARM Limited and Contributors. All rights reserved.
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #ifndef __PLATFORM_DEF_H__
8 #define __PLATFORM_DEF_H__
9 
10 #include <arm_def.h>
11 #include <board_arm_def.h>
12 #include <common_def.h>
13 #include <tzc400.h>
14 #include <utils.h>
15 #include <v2m_def.h>
16 #include "../fvp_def.h"
17 
18 /* Required platform porting definitions */
19 #define PLAT_NUM_PWR_DOMAINS		(FVP_CLUSTER_COUNT + \
20 					PLATFORM_CORE_COUNT)
21 #define PLAT_MAX_PWR_LVL		ARM_PWR_LVL1
22 #define PLATFORM_CORE_COUNT		(FVP_CLUSTER_COUNT * FVP_MAX_CPUS_PER_CLUSTER)
23 
24 /*
25  * Other platform porting definitions are provided by included headers
26  */
27 
28 /*
29  * Required ARM standard platform porting definitions
30  */
31 #define PLAT_ARM_CLUSTER_COUNT		FVP_CLUSTER_COUNT
32 
33 #define PLAT_ARM_TRUSTED_ROM_BASE	0x00000000
34 #define PLAT_ARM_TRUSTED_ROM_SIZE	0x04000000	/* 64 MB */
35 
36 #define PLAT_ARM_TRUSTED_DRAM_BASE	0x06000000
37 #define PLAT_ARM_TRUSTED_DRAM_SIZE	0x02000000	/* 32 MB */
38 
39 /* No SCP in FVP */
40 #define PLAT_ARM_SCP_TZC_DRAM1_SIZE	ULL(0x0)
41 
42 #define PLAT_ARM_DRAM2_SIZE		ULL(0x780000000)
43 
44 /*
45  * Load address of BL33 for this platform port
46  */
47 #define PLAT_ARM_NS_IMAGE_OFFSET	(ARM_DRAM1_BASE + 0x8000000)
48 
49 
50 /*
51  * PL011 related constants
52  */
53 #define PLAT_ARM_BOOT_UART_BASE		V2M_IOFPGA_UART0_BASE
54 #define PLAT_ARM_BOOT_UART_CLK_IN_HZ	V2M_IOFPGA_UART0_CLK_IN_HZ
55 
56 #define PLAT_ARM_BL31_RUN_UART_BASE		V2M_IOFPGA_UART1_BASE
57 #define PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ
58 
59 #define PLAT_ARM_CRASH_UART_BASE	PLAT_ARM_BL31_RUN_UART_BASE
60 #define PLAT_ARM_CRASH_UART_CLK_IN_HZ	PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ
61 
62 #define PLAT_ARM_TSP_UART_BASE		V2M_IOFPGA_UART2_BASE
63 #define PLAT_ARM_TSP_UART_CLK_IN_HZ	V2M_IOFPGA_UART2_CLK_IN_HZ
64 
65 /* CCI related constants */
66 #define PLAT_ARM_CCI_BASE		0x2c090000
67 #define PLAT_ARM_CCI_CLUSTER0_SL_IFACE_IX	3
68 #define PLAT_ARM_CCI_CLUSTER1_SL_IFACE_IX	4
69 
70 /* CCN related constants. Only CCN 502 is currently supported */
71 #define PLAT_ARM_CCN_BASE		0x2e000000
72 #define PLAT_ARM_CLUSTER_TO_CCN_ID_MAP	1, 5, 7, 11
73 
74 /* System timer related constants */
75 #define PLAT_ARM_NSTIMER_FRAME_ID		1
76 
77 /* Mailbox base address */
78 #define PLAT_ARM_TRUSTED_MAILBOX_BASE	ARM_TRUSTED_SRAM_BASE
79 
80 
81 /* TrustZone controller related constants
82  *
83  * Currently only filters 0 and 2 are connected on Base FVP.
84  * Filter 0 : CPU clusters (no access to DRAM by default)
85  * Filter 1 : not connected
86  * Filter 2 : LCDs (access to VRAM allowed by default)
87  * Filter 3 : not connected
88  * Programming unconnected filters will have no effect at the
89  * moment. These filter could, however, be connected in future.
90  * So care should be taken not to configure the unused filters.
91  *
92  * Allow only non-secure access to all DRAM to supported devices.
93  * Give access to the CPUs and Virtio. Some devices
94  * would normally use the default ID so allow that too.
95  */
96 #define PLAT_ARM_TZC_BASE		0x2a4a0000
97 #define PLAT_ARM_TZC_FILTERS		TZC_400_REGION_ATTR_FILTER_BIT(0)
98 
99 #define PLAT_ARM_TZC_NS_DEV_ACCESS	(				\
100 		TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT)	|	\
101 		TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI)		|	\
102 		TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP)		|	\
103 		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO)	|	\
104 		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD))
105 
106 /*
107  * GIC related constants to cater for both GICv2 and GICv3 instances of an
108  * FVP. They could be overriden at runtime in case the FVP implements the legacy
109  * VE memory map.
110  */
111 #define PLAT_ARM_GICD_BASE		BASE_GICD_BASE
112 #define PLAT_ARM_GICR_BASE		BASE_GICR_BASE
113 #define PLAT_ARM_GICC_BASE		BASE_GICC_BASE
114 
115 /*
116  * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
117  * terminology. On a GICv2 system or mode, the lists will be merged and treated
118  * as Group 0 interrupts.
119  */
120 #define PLAT_ARM_G1S_IRQS		ARM_G1S_IRQS,			\
121 					FVP_IRQ_TZ_WDOG,		\
122 					FVP_IRQ_SEC_SYS_TIMER
123 
124 #define PLAT_ARM_G0_IRQS		ARM_G0_IRQS
125 
126 #endif /* __PLATFORM_DEF_H__ */
127