1 /* 2 * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 */ 6 #ifndef ARM_DEF_H 7 #define ARM_DEF_H 8 9 #include <platform_def.h> 10 11 #include <arch.h> 12 #include <common/interrupt_props.h> 13 #include <common/tbbr/tbbr_img_def.h> 14 #include <drivers/arm/gic_common.h> 15 #include <lib/utils_def.h> 16 #include <lib/xlat_tables/xlat_tables_defs.h> 17 #include <plat/common/common_def.h> 18 19 /****************************************************************************** 20 * Definitions common to all ARM standard platforms 21 *****************************************************************************/ 22 23 /* Special value used to verify platform parameters from BL2 to BL31 */ 24 #define ARM_BL31_PLAT_PARAM_VAL ULL(0x0f1e2d3c4b5a6978) 25 26 #define ARM_SYSTEM_COUNT 1 27 28 #define ARM_CACHE_WRITEBACK_SHIFT 6 29 30 /* 31 * Macros mapping the MPIDR Affinity levels to ARM Platform Power levels. The 32 * power levels have a 1:1 mapping with the MPIDR affinity levels. 33 */ 34 #define ARM_PWR_LVL0 MPIDR_AFFLVL0 35 #define ARM_PWR_LVL1 MPIDR_AFFLVL1 36 #define ARM_PWR_LVL2 MPIDR_AFFLVL2 37 #define ARM_PWR_LVL3 MPIDR_AFFLVL3 38 39 /* 40 * Macros for local power states in ARM platforms encoded by State-ID field 41 * within the power-state parameter. 42 */ 43 /* Local power state for power domains in Run state. */ 44 #define ARM_LOCAL_STATE_RUN U(0) 45 /* Local power state for retention. Valid only for CPU power domains */ 46 #define ARM_LOCAL_STATE_RET U(1) 47 /* Local power state for OFF/power-down. Valid for CPU and cluster power 48 domains */ 49 #define ARM_LOCAL_STATE_OFF U(2) 50 51 /* Memory location options for TSP */ 52 #define ARM_TRUSTED_SRAM_ID 0 53 #define ARM_TRUSTED_DRAM_ID 1 54 #define ARM_DRAM_ID 2 55 56 /* The first 4KB of Trusted SRAM are used as shared memory */ 57 #define ARM_TRUSTED_SRAM_BASE UL(0x04000000) 58 #define ARM_SHARED_RAM_BASE ARM_TRUSTED_SRAM_BASE 59 #define ARM_SHARED_RAM_SIZE UL(0x00001000) /* 4 KB */ 60 61 /* The remaining Trusted SRAM is used to load the BL images */ 62 #define ARM_BL_RAM_BASE (ARM_SHARED_RAM_BASE + \ 63 ARM_SHARED_RAM_SIZE) 64 #define ARM_BL_RAM_SIZE (PLAT_ARM_TRUSTED_SRAM_SIZE - \ 65 ARM_SHARED_RAM_SIZE) 66 67 /* 68 * The top 16MB of DRAM1 is configured as secure access only using the TZC 69 * - SCP TZC DRAM: If present, DRAM reserved for SCP use 70 * - AP TZC DRAM: The remaining TZC secured DRAM reserved for AP use 71 */ 72 #define ARM_TZC_DRAM1_SIZE UL(0x01000000) 73 74 #define ARM_SCP_TZC_DRAM1_BASE (ARM_DRAM1_BASE + \ 75 ARM_DRAM1_SIZE - \ 76 ARM_SCP_TZC_DRAM1_SIZE) 77 #define ARM_SCP_TZC_DRAM1_SIZE PLAT_ARM_SCP_TZC_DRAM1_SIZE 78 #define ARM_SCP_TZC_DRAM1_END (ARM_SCP_TZC_DRAM1_BASE + \ 79 ARM_SCP_TZC_DRAM1_SIZE - 1) 80 81 /* 82 * Define a 2MB region within the TZC secured DRAM for use by EL3 runtime 83 * firmware. This region is meant to be NOLOAD and will not be zero 84 * initialized. Data sections with the attribute `arm_el3_tzc_dram` will be 85 * placed here. 86 */ 87 #define ARM_EL3_TZC_DRAM1_BASE (ARM_SCP_TZC_DRAM1_BASE - ARM_EL3_TZC_DRAM1_SIZE) 88 #define ARM_EL3_TZC_DRAM1_SIZE UL(0x00200000) /* 2 MB */ 89 #define ARM_EL3_TZC_DRAM1_END (ARM_EL3_TZC_DRAM1_BASE + \ 90 ARM_EL3_TZC_DRAM1_SIZE - 1) 91 92 #define ARM_AP_TZC_DRAM1_BASE (ARM_DRAM1_BASE + \ 93 ARM_DRAM1_SIZE - \ 94 ARM_TZC_DRAM1_SIZE) 95 #define ARM_AP_TZC_DRAM1_SIZE (ARM_TZC_DRAM1_SIZE - \ 96 (ARM_SCP_TZC_DRAM1_SIZE + \ 97 ARM_EL3_TZC_DRAM1_SIZE)) 98 #define ARM_AP_TZC_DRAM1_END (ARM_AP_TZC_DRAM1_BASE + \ 99 ARM_AP_TZC_DRAM1_SIZE - 1) 100 101 /* Define the Access permissions for Secure peripherals to NS_DRAM */ 102 #if ARM_CRYPTOCELL_INTEG 103 /* 104 * Allow Secure peripheral to read NS DRAM when integrated with CryptoCell. 105 * This is required by CryptoCell to authenticate BL33 which is loaded 106 * into the Non Secure DDR. 107 */ 108 #define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_RD 109 #else 110 #define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_NONE 111 #endif 112 113 #ifdef SPD_opteed 114 /* 115 * BL2 needs to map 4MB at the end of TZC_DRAM1 in order to 116 * load/authenticate the trusted os extra image. The first 512KB of 117 * TZC_DRAM1 are reserved for trusted os (OPTEE). The extra image loading 118 * for OPTEE is paged image which only include the paging part using 119 * virtual memory but without "init" data. OPTEE will copy the "init" data 120 * (from pager image) to the first 512KB of TZC_DRAM, and then copy the 121 * extra image behind the "init" data. 122 */ 123 #define ARM_OPTEE_PAGEABLE_LOAD_BASE (ARM_AP_TZC_DRAM1_BASE + \ 124 ARM_AP_TZC_DRAM1_SIZE - \ 125 ARM_OPTEE_PAGEABLE_LOAD_SIZE) 126 #define ARM_OPTEE_PAGEABLE_LOAD_SIZE UL(0x400000) 127 #define ARM_OPTEE_PAGEABLE_LOAD_MEM MAP_REGION_FLAT( \ 128 ARM_OPTEE_PAGEABLE_LOAD_BASE, \ 129 ARM_OPTEE_PAGEABLE_LOAD_SIZE, \ 130 MT_MEMORY | MT_RW | MT_SECURE) 131 132 /* 133 * Map the memory for the OP-TEE core (also known as OP-TEE pager when paging 134 * support is enabled). 135 */ 136 #define ARM_MAP_OPTEE_CORE_MEM MAP_REGION_FLAT( \ 137 BL32_BASE, \ 138 BL32_LIMIT - BL32_BASE, \ 139 MT_MEMORY | MT_RW | MT_SECURE) 140 #endif /* SPD_opteed */ 141 142 #define ARM_NS_DRAM1_BASE ARM_DRAM1_BASE 143 #define ARM_NS_DRAM1_SIZE (ARM_DRAM1_SIZE - \ 144 ARM_TZC_DRAM1_SIZE) 145 #define ARM_NS_DRAM1_END (ARM_NS_DRAM1_BASE + \ 146 ARM_NS_DRAM1_SIZE - 1) 147 148 #define ARM_DRAM1_BASE ULL(0x80000000) 149 #define ARM_DRAM1_SIZE ULL(0x80000000) 150 #define ARM_DRAM1_END (ARM_DRAM1_BASE + \ 151 ARM_DRAM1_SIZE - 1) 152 153 #define ARM_DRAM2_BASE UL(0x880000000) 154 #define ARM_DRAM2_SIZE PLAT_ARM_DRAM2_SIZE 155 #define ARM_DRAM2_END (ARM_DRAM2_BASE + \ 156 ARM_DRAM2_SIZE - 1) 157 158 #define ARM_IRQ_SEC_PHY_TIMER 29 159 160 #define ARM_IRQ_SEC_SGI_0 8 161 #define ARM_IRQ_SEC_SGI_1 9 162 #define ARM_IRQ_SEC_SGI_2 10 163 #define ARM_IRQ_SEC_SGI_3 11 164 #define ARM_IRQ_SEC_SGI_4 12 165 #define ARM_IRQ_SEC_SGI_5 13 166 #define ARM_IRQ_SEC_SGI_6 14 167 #define ARM_IRQ_SEC_SGI_7 15 168 169 /* 170 * Define a list of Group 1 Secure and Group 0 interrupt properties as per GICv3 171 * terminology. On a GICv2 system or mode, the lists will be merged and treated 172 * as Group 0 interrupts. 173 */ 174 #define ARM_G1S_IRQ_PROPS(grp) \ 175 INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, (grp), \ 176 GIC_INTR_CFG_LEVEL), \ 177 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, (grp), \ 178 GIC_INTR_CFG_EDGE), \ 179 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, (grp), \ 180 GIC_INTR_CFG_EDGE), \ 181 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, (grp), \ 182 GIC_INTR_CFG_EDGE), \ 183 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, (grp), \ 184 GIC_INTR_CFG_EDGE), \ 185 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, (grp), \ 186 GIC_INTR_CFG_EDGE), \ 187 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, (grp), \ 188 GIC_INTR_CFG_EDGE) 189 190 #define ARM_G0_IRQ_PROPS(grp) \ 191 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_0, PLAT_SDEI_NORMAL_PRI, (grp), \ 192 GIC_INTR_CFG_EDGE), \ 193 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, (grp), \ 194 GIC_INTR_CFG_EDGE) 195 196 #define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \ 197 ARM_SHARED_RAM_BASE, \ 198 ARM_SHARED_RAM_SIZE, \ 199 MT_DEVICE | MT_RW | MT_SECURE) 200 201 #define ARM_MAP_NS_DRAM1 MAP_REGION_FLAT( \ 202 ARM_NS_DRAM1_BASE, \ 203 ARM_NS_DRAM1_SIZE, \ 204 MT_MEMORY | MT_RW | MT_NS) 205 206 #define ARM_MAP_DRAM2 MAP_REGION_FLAT( \ 207 ARM_DRAM2_BASE, \ 208 ARM_DRAM2_SIZE, \ 209 MT_MEMORY | MT_RW | MT_NS) 210 211 #define ARM_MAP_TSP_SEC_MEM MAP_REGION_FLAT( \ 212 TSP_SEC_MEM_BASE, \ 213 TSP_SEC_MEM_SIZE, \ 214 MT_MEMORY | MT_RW | MT_SECURE) 215 216 #if ARM_BL31_IN_DRAM 217 #define ARM_MAP_BL31_SEC_DRAM MAP_REGION_FLAT( \ 218 BL31_BASE, \ 219 PLAT_ARM_MAX_BL31_SIZE, \ 220 MT_MEMORY | MT_RW | MT_SECURE) 221 #endif 222 223 #define ARM_MAP_EL3_TZC_DRAM MAP_REGION_FLAT( \ 224 ARM_EL3_TZC_DRAM1_BASE, \ 225 ARM_EL3_TZC_DRAM1_SIZE, \ 226 MT_MEMORY | MT_RW | MT_SECURE) 227 228 /* 229 * Mapping for the BL1 RW region. This mapping is needed by BL2 in order to 230 * share the Mbed TLS heap. Since the heap is allocated inside BL1, it resides 231 * in the BL1 RW region. Hence, BL2 needs access to the BL1 RW region in order 232 * to be able to access the heap. 233 */ 234 #define ARM_MAP_BL1_RW MAP_REGION_FLAT( \ 235 BL1_RW_BASE, \ 236 BL1_RW_LIMIT - BL1_RW_BASE, \ 237 MT_MEMORY | MT_RW | MT_SECURE) 238 239 /* 240 * If SEPARATE_CODE_AND_RODATA=1 we define a region for each section 241 * otherwise one region is defined containing both. 242 */ 243 #if SEPARATE_CODE_AND_RODATA 244 #define ARM_MAP_BL_RO MAP_REGION_FLAT( \ 245 BL_CODE_BASE, \ 246 BL_CODE_END - BL_CODE_BASE, \ 247 MT_CODE | MT_SECURE), \ 248 MAP_REGION_FLAT( \ 249 BL_RO_DATA_BASE, \ 250 BL_RO_DATA_END \ 251 - BL_RO_DATA_BASE, \ 252 MT_RO_DATA | MT_SECURE) 253 #else 254 #define ARM_MAP_BL_RO MAP_REGION_FLAT( \ 255 BL_CODE_BASE, \ 256 BL_CODE_END - BL_CODE_BASE, \ 257 MT_CODE | MT_SECURE) 258 #endif 259 #if USE_COHERENT_MEM 260 #define ARM_MAP_BL_COHERENT_RAM MAP_REGION_FLAT( \ 261 BL_COHERENT_RAM_BASE, \ 262 BL_COHERENT_RAM_END \ 263 - BL_COHERENT_RAM_BASE, \ 264 MT_DEVICE | MT_RW | MT_SECURE) 265 #endif 266 #if USE_ROMLIB 267 #define ARM_MAP_ROMLIB_CODE MAP_REGION_FLAT( \ 268 ROMLIB_RO_BASE, \ 269 ROMLIB_RO_LIMIT - ROMLIB_RO_BASE,\ 270 MT_CODE | MT_SECURE) 271 272 #define ARM_MAP_ROMLIB_DATA MAP_REGION_FLAT( \ 273 ROMLIB_RW_BASE, \ 274 ROMLIB_RW_END - ROMLIB_RW_BASE,\ 275 MT_MEMORY | MT_RW | MT_SECURE) 276 #endif 277 278 /* 279 * Map mem_protect flash region with read and write permissions 280 */ 281 #define ARM_V2M_MAP_MEM_PROTECT MAP_REGION_FLAT(PLAT_ARM_MEM_PROT_ADDR, \ 282 V2M_FLASH_BLOCK_SIZE, \ 283 MT_DEVICE | MT_RW | MT_SECURE) 284 285 /* 286 * The max number of regions like RO(code), coherent and data required by 287 * different BL stages which need to be mapped in the MMU. 288 */ 289 #define ARM_BL_REGIONS 5 290 291 #define MAX_MMAP_REGIONS (PLAT_ARM_MMAP_ENTRIES + \ 292 ARM_BL_REGIONS) 293 294 /* Memory mapped Generic timer interfaces */ 295 #define ARM_SYS_CNTCTL_BASE UL(0x2a430000) 296 #define ARM_SYS_CNTREAD_BASE UL(0x2a800000) 297 #define ARM_SYS_TIMCTL_BASE UL(0x2a810000) 298 #define ARM_SYS_CNT_BASE_S UL(0x2a820000) 299 #define ARM_SYS_CNT_BASE_NS UL(0x2a830000) 300 301 #define ARM_CONSOLE_BAUDRATE 115200 302 303 /* Trusted Watchdog constants */ 304 #define ARM_SP805_TWDG_BASE UL(0x2a490000) 305 #define ARM_SP805_TWDG_CLK_HZ 32768 306 /* The TBBR document specifies a watchdog timeout of 256 seconds. SP805 307 * asserts reset after two consecutive countdowns (2 x 128 = 256 sec) */ 308 #define ARM_TWDG_TIMEOUT_SEC 128 309 #define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \ 310 ARM_TWDG_TIMEOUT_SEC) 311 312 /****************************************************************************** 313 * Required platform porting definitions common to all ARM standard platforms 314 *****************************************************************************/ 315 316 /* 317 * We need to access DRAM2 from BL2 for PSCI_MEM_PROTECT for 318 * AArch64 builds 319 */ 320 #ifdef AARCH64 321 #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 36) 322 #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 36) 323 #else 324 #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32) 325 #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32) 326 #endif 327 328 329 /* 330 * This macro defines the deepest retention state possible. A higher state 331 * id will represent an invalid or a power down state. 332 */ 333 #define PLAT_MAX_RET_STATE ARM_LOCAL_STATE_RET 334 335 /* 336 * This macro defines the deepest power down states possible. Any state ID 337 * higher than this is invalid. 338 */ 339 #define PLAT_MAX_OFF_STATE ARM_LOCAL_STATE_OFF 340 341 /* 342 * Some data must be aligned on the biggest cache line size in the platform. 343 * This is known only to the platform as it might have a combination of 344 * integrated and external caches. 345 */ 346 #define CACHE_WRITEBACK_GRANULE (U(1) << ARM_CACHE_WRITEBACK_SHIFT) 347 348 /* 349 * To enable TB_FW_CONFIG to be loaded by BL1, define the corresponding base 350 * and limit. Leave enough space of BL2 meminfo. 351 */ 352 #define ARM_TB_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t)) 353 #define ARM_TB_FW_CONFIG_LIMIT (ARM_BL_RAM_BASE + PAGE_SIZE) 354 355 /******************************************************************************* 356 * BL1 specific defines. 357 * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of 358 * addresses. 359 ******************************************************************************/ 360 #define BL1_RO_BASE PLAT_ARM_TRUSTED_ROM_BASE 361 #define BL1_RO_LIMIT (PLAT_ARM_TRUSTED_ROM_BASE \ 362 + (PLAT_ARM_TRUSTED_ROM_SIZE - \ 363 PLAT_ARM_MAX_ROMLIB_RO_SIZE)) 364 /* 365 * Put BL1 RW at the top of the Trusted SRAM. 366 */ 367 #define BL1_RW_BASE (ARM_BL_RAM_BASE + \ 368 ARM_BL_RAM_SIZE - \ 369 (PLAT_ARM_MAX_BL1_RW_SIZE +\ 370 PLAT_ARM_MAX_ROMLIB_RW_SIZE)) 371 #define BL1_RW_LIMIT (ARM_BL_RAM_BASE + \ 372 (ARM_BL_RAM_SIZE - PLAT_ARM_MAX_ROMLIB_RW_SIZE)) 373 374 #define ROMLIB_RO_BASE BL1_RO_LIMIT 375 #define ROMLIB_RO_LIMIT (PLAT_ARM_TRUSTED_ROM_BASE + PLAT_ARM_TRUSTED_ROM_SIZE) 376 377 #define ROMLIB_RW_BASE (BL1_RW_BASE + PLAT_ARM_MAX_BL1_RW_SIZE) 378 #define ROMLIB_RW_END (ROMLIB_RW_BASE + PLAT_ARM_MAX_ROMLIB_RW_SIZE) 379 380 /******************************************************************************* 381 * BL2 specific defines. 382 ******************************************************************************/ 383 #if BL2_AT_EL3 384 /* Put BL2 towards the middle of the Trusted SRAM */ 385 #define BL2_BASE (ARM_TRUSTED_SRAM_BASE + \ 386 (PLAT_ARM_TRUSTED_SRAM_SIZE >> 1) + 0x2000) 387 #define BL2_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) 388 389 #else 390 /* 391 * Put BL2 just below BL1. 392 */ 393 #define BL2_BASE (BL1_RW_BASE - PLAT_ARM_MAX_BL2_SIZE) 394 #define BL2_LIMIT BL1_RW_BASE 395 #endif 396 397 /******************************************************************************* 398 * BL31 specific defines. 399 ******************************************************************************/ 400 #if ARM_BL31_IN_DRAM 401 /* 402 * Put BL31 at the bottom of TZC secured DRAM 403 */ 404 #define BL31_BASE ARM_AP_TZC_DRAM1_BASE 405 #define BL31_LIMIT (ARM_AP_TZC_DRAM1_BASE + \ 406 PLAT_ARM_MAX_BL31_SIZE) 407 #elif (RESET_TO_BL31) 408 /* Ensure Position Independent support (PIE) is enabled for this config.*/ 409 # if !ENABLE_PIE 410 # error "BL31 must be a PIE if RESET_TO_BL31=1." 411 # endif 412 /* 413 * Since this is PIE, we can define BL31_BASE to 0x0 since this macro is solely 414 * used for building BL31 when RESET_TO_BL31=1. 415 */ 416 #define BL31_BASE 0x0 417 #define BL31_LIMIT PLAT_ARM_MAX_BL31_SIZE 418 #else 419 /* Put BL31 below BL2 in the Trusted SRAM.*/ 420 #define BL31_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)\ 421 - PLAT_ARM_MAX_BL31_SIZE) 422 #define BL31_PROGBITS_LIMIT BL2_BASE 423 /* 424 * For BL2_AT_EL3 make sure the BL31 can grow up until BL2_BASE. This is 425 * because in the BL2_AT_EL3 configuration, BL2 is always resident. 426 */ 427 #if BL2_AT_EL3 428 #define BL31_LIMIT BL2_BASE 429 #else 430 #define BL31_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) 431 #endif 432 #endif 433 434 #if defined(AARCH32) || JUNO_AARCH32_EL3_RUNTIME 435 /******************************************************************************* 436 * BL32 specific defines for EL3 runtime in AArch32 mode 437 ******************************************************************************/ 438 # if RESET_TO_SP_MIN && !JUNO_AARCH32_EL3_RUNTIME 439 /* 440 * SP_MIN is the only BL image in SRAM. Allocate the whole of SRAM (excluding 441 * the page reserved for fw_configs) to BL32 442 */ 443 # define BL32_BASE ARM_TB_FW_CONFIG_LIMIT 444 # define BL32_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) 445 # else 446 /* Put BL32 below BL2 in the Trusted SRAM.*/ 447 # define BL32_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)\ 448 - PLAT_ARM_MAX_BL32_SIZE) 449 # define BL32_PROGBITS_LIMIT BL2_BASE 450 # define BL32_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) 451 # endif /* RESET_TO_SP_MIN && !JUNO_AARCH32_EL3_RUNTIME */ 452 453 #else 454 /******************************************************************************* 455 * BL32 specific defines for EL3 runtime in AArch64 mode 456 ******************************************************************************/ 457 /* 458 * On ARM standard platforms, the TSP can execute from Trusted SRAM, 459 * Trusted DRAM (if available) or the DRAM region secured by the TrustZone 460 * controller. 461 */ 462 # if ENABLE_SPM 463 # define TSP_SEC_MEM_BASE (ARM_AP_TZC_DRAM1_BASE + ULL(0x200000)) 464 # define TSP_SEC_MEM_SIZE (ARM_AP_TZC_DRAM1_SIZE - ULL(0x200000)) 465 # define BL32_BASE (ARM_AP_TZC_DRAM1_BASE + ULL(0x200000)) 466 # define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \ 467 ARM_AP_TZC_DRAM1_SIZE) 468 # elif ARM_BL31_IN_DRAM 469 # define TSP_SEC_MEM_BASE (ARM_AP_TZC_DRAM1_BASE + \ 470 PLAT_ARM_MAX_BL31_SIZE) 471 # define TSP_SEC_MEM_SIZE (ARM_AP_TZC_DRAM1_SIZE - \ 472 PLAT_ARM_MAX_BL31_SIZE) 473 # define BL32_BASE (ARM_AP_TZC_DRAM1_BASE + \ 474 PLAT_ARM_MAX_BL31_SIZE) 475 # define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \ 476 ARM_AP_TZC_DRAM1_SIZE) 477 # elif ARM_TSP_RAM_LOCATION_ID == ARM_TRUSTED_SRAM_ID 478 # define TSP_SEC_MEM_BASE ARM_BL_RAM_BASE 479 # define TSP_SEC_MEM_SIZE ARM_BL_RAM_SIZE 480 # define TSP_PROGBITS_LIMIT BL31_BASE 481 # define BL32_BASE ARM_TB_FW_CONFIG_LIMIT 482 # define BL32_LIMIT BL31_BASE 483 # elif ARM_TSP_RAM_LOCATION_ID == ARM_TRUSTED_DRAM_ID 484 # define TSP_SEC_MEM_BASE PLAT_ARM_TRUSTED_DRAM_BASE 485 # define TSP_SEC_MEM_SIZE PLAT_ARM_TRUSTED_DRAM_SIZE 486 # define BL32_BASE PLAT_ARM_TRUSTED_DRAM_BASE 487 # define BL32_LIMIT (PLAT_ARM_TRUSTED_DRAM_BASE \ 488 + (UL(1) << 21)) 489 # elif ARM_TSP_RAM_LOCATION_ID == ARM_DRAM_ID 490 # define TSP_SEC_MEM_BASE ARM_AP_TZC_DRAM1_BASE 491 # define TSP_SEC_MEM_SIZE ARM_AP_TZC_DRAM1_SIZE 492 # define BL32_BASE ARM_AP_TZC_DRAM1_BASE 493 # define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \ 494 ARM_AP_TZC_DRAM1_SIZE) 495 # else 496 # error "Unsupported ARM_TSP_RAM_LOCATION_ID value" 497 # endif 498 #endif /* AARCH32 || JUNO_AARCH32_EL3_RUNTIME */ 499 500 /* 501 * BL32 is mandatory in AArch32. In AArch64, undefine BL32_BASE if there is no 502 * SPD and no SPM, as they are the only ones that can be used as BL32. 503 */ 504 #if !(defined(AARCH32) || JUNO_AARCH32_EL3_RUNTIME) 505 # if defined(SPD_none) && !ENABLE_SPM 506 # undef BL32_BASE 507 # endif /* defined(SPD_none) && !ENABLE_SPM */ 508 #endif /* !(defined(AARCH32) || JUNO_AARCH32_EL3_RUNTIME) */ 509 510 /******************************************************************************* 511 * FWU Images: NS_BL1U, BL2U & NS_BL2U defines. 512 ******************************************************************************/ 513 #define BL2U_BASE BL2_BASE 514 #define BL2U_LIMIT BL2_LIMIT 515 516 #define NS_BL2U_BASE ARM_NS_DRAM1_BASE 517 #define NS_BL1U_BASE (PLAT_ARM_NVM_BASE + UL(0x03EB8000)) 518 519 /* 520 * ID of the secure physical generic timer interrupt used by the TSP. 521 */ 522 #define TSP_IRQ_SEC_PHY_TIMER ARM_IRQ_SEC_PHY_TIMER 523 524 525 /* 526 * One cache line needed for bakery locks on ARM platforms 527 */ 528 #define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE) 529 530 /* Priority levels for ARM platforms */ 531 #define PLAT_RAS_PRI 0x10 532 #define PLAT_SDEI_CRITICAL_PRI 0x60 533 #define PLAT_SDEI_NORMAL_PRI 0x70 534 535 /* ARM platforms use 3 upper bits of secure interrupt priority */ 536 #define ARM_PRI_BITS 3 537 538 /* SGI used for SDEI signalling */ 539 #define ARM_SDEI_SGI ARM_IRQ_SEC_SGI_0 540 541 /* ARM SDEI dynamic private event numbers */ 542 #define ARM_SDEI_DP_EVENT_0 1000 543 #define ARM_SDEI_DP_EVENT_1 1001 544 #define ARM_SDEI_DP_EVENT_2 1002 545 546 /* ARM SDEI dynamic shared event numbers */ 547 #define ARM_SDEI_DS_EVENT_0 2000 548 #define ARM_SDEI_DS_EVENT_1 2001 549 #define ARM_SDEI_DS_EVENT_2 2002 550 551 #define ARM_SDEI_PRIVATE_EVENTS \ 552 SDEI_DEFINE_EVENT_0(ARM_SDEI_SGI), \ 553 SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ 554 SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ 555 SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC) 556 557 #define ARM_SDEI_SHARED_EVENTS \ 558 SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ 559 SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ 560 SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC) 561 562 #endif /* ARM_DEF_H */ 563