plat: imx: imx8qm: apply clk/pinmux configuration for DEBUG_CONSOLE

Having DEBUG_CONSOLE enabled without enabling DEBUG_CONSOLE_A53
doesn't make sense (since UART pinmux/clock configuration is appli

plat: imx: imx8qm: apply clk/pinmux configuration for DEBUG_CONSOLE

Having DEBUG_CONSOLE enabled without enabling DEBUG_CONSOLE_A53
doesn't make sense (since UART pinmux/clock configuration is applied
for UART only when DEBUG_CONSOLE_A53 is enabled).

Enable DEBUG_CONSOLE_A53 if DEBUG_CONSOLE is enabled.

Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Change-Id: I8ca411d5544658b9bcc39e5340ec042c51088b96

show more ...

plat: imx: imx8qm: provide debug uart num as build param

This removes hardcoded iomux/clk/addr configuration for debug uart,
provides possibility (as a workaround, till that information isn't
provid

plat: imx: imx8qm: provide debug uart num as build param

This removes hardcoded iomux/clk/addr configuration for debug uart,
provides possibility (as a workaround, till that information isn't
provided via DT) to set this configuration during compile time via
IMX_DEBUG_UART build flag.

Usage:
$ make PLAT=imx8qm IMX_DEBUG_UART=1 bl31

Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Change-Id: Ib5f5dd81ba0c8ad2b2dc5647ec75629072f511c5

show more ...

imx: Unify Platform specific defines for PSCI module

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLU

imx: Unify Platform specific defines for PSCI module

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int

Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I8b19e833a4e1067e1cfcc9bfaede7854e0e63004

show more ...

imx8: Replace PLAT_IMX8* with automatic PLAT_imx8*

Platform defines are already provided by the build system so let's not
duplicate them.

Change-Id: Icf1ea76c3c3213e27b447c95e2b22b961fa7693e
Signed

imx8: Replace PLAT_IMX8* with automatic PLAT_imx8*

Platform defines are already provided by the build system so let's not
duplicate them.

Change-Id: Icf1ea76c3c3213e27b447c95e2b22b961fa7693e
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

show more ...

imx: power optimization for i.mx8qm

Current implementation of i.MX8QM power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kep

imx: power optimization for i.mx8qm

Current implementation of i.MX8QM power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kept in STBY mode (powered
ON) when system suspend or CPU hotplug.

To lower the power number, OFF mode should be adopted for those
system resources whenever they can be OFF, A cluster will be OFF
if the CPUs in the cluster are all off line, DDR/MU/DB can be OFF
if system suspend, IRQ steer can be OFF if the wakeup source is
belonged to system controller partition, so wakeup source runtime
check is used to determine if IRQ steer can be OFF before system
suspend.

If resources are powered off for suspend, they should be restored
properly after system resume.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...