rcar_gen3: drivers: pwrc: Switch to common delay implementation

Replace the ad-hoc implementation of delay in PWRC driver
with common R-Car delay code.

Signed-off-by: Marek Vasut <marek.vasut+renes

rcar_gen3: drivers: pwrc: Switch to common delay implementation

Replace the ad-hoc implementation of delay in PWRC driver
with common R-Car delay code.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: drivers: delay: Rewrite from assembler to C

Rewrite the delay code from assembler to C.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

rcar_gen3: plat: Add generic timer init

Add code to determine the platform timer frequency and configure
the generic timer accordingly early in BL2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@

rcar_gen3: plat: Add generic timer init

Add code to determine the platform timer frequency and configure
the generic timer accordingly early in BL2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: drivers: cpld: Move rcar_cpld_reset_cpu() into header

Move the rcar_cpld_reset_cpu() function into header file and zap the externs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.

rcar_gen3: drivers: cpld: Move rcar_cpld_reset_cpu() into header

Move the rcar_cpld_reset_cpu() function into header file and zap the externs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: plat: Dump EL3 interrupt error registers

Since the interrupts are handled in EL3, dump the EL3 error registers
in case an error happens.

Signed-off-by: Marek Vasut <marek.vasut+renesas@g

rcar_gen3: plat: Dump EL3 interrupt error registers

Since the interrupts are handled in EL3, dump the EL3 error registers
in case an error happens.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: plat: Enable programmable CPU reset address

The reset address is programmable on the R-Car Gen3, enable it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

rcar_gen3: plat: Disable IPMMU PV0 cache on E3

Disable the IPMMU PV0 cache on E3 rev. 1.x .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

rcar_gen3: plat: Add E3 rev. 1.1 support

Add support for R-Car E3 silicon rev. 1.1

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

rcar_gen3: plat: Add missing platform auto-detection name

Add missing TARGET_NAME for the case where RCAR_LSI is set to AUTO,
which is platform auto-detection.

Signed-off-by: Marek Vasut <marek.vas

rcar_gen3: plat: Add missing platform auto-detection name

Add missing TARGET_NAME for the case where RCAR_LSI is set to AUTO,
which is platform auto-detection.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: plat: Clean up rcar_pwrc_code_copy_to_system_ram()

Call the function only from architecture setup and at the end of
suspend cycle instead of calling it all over the place.

Signed-off-by:

rcar_gen3: plat: Clean up rcar_pwrc_code_copy_to_system_ram()

Call the function only from architecture setup and at the end of
suspend cycle instead of calling it all over the place.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: plat: Fix BL2 size check

Rename BL2_LIMIT to BL2_IMAGE_LIMIT and BL2_SYSRAM_LIMIT to BL2_LIMIT to
correctly set BL2_LIMIT value. Set correct DEVICE_SRAM_BASE to match the
hardware. Use BL

rcar_gen3: plat: Fix BL2 size check

Rename BL2_LIMIT to BL2_IMAGE_LIMIT and BL2_SYSRAM_LIMIT to BL2_LIMIT to
correctly set BL2_LIMIT value. Set correct DEVICE_SRAM_BASE to match the
hardware. Use BL2_END in rcar_configure_mmu_el3() to mark the cacheable
BL2 area.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: plat: Staticize memory maps

Staticize the platform memory map tables as they are only used within
the platform_common.c file.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

rcar_gen3: plat: Function cleanup

Replace foo_t with struct foo.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

rcar_gen3: plat: Fix cache line size

The CPU has cache line size of 64 Bytes, fix the cache line size.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

rcar_gen3: plat: Disable SVE

Apply 3872fc2d1fc5 ("Do not enable SVE on pre-v8.2 platforms") to
R-Car Gen3 too.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

rcar_gen3: plat: Add missing dependency to rcar_srecord

Add missing dependency on the bl2.elf and bl31.elf into the rcar_srecord
target, which uses those ELF files to generate the SRECs.

Signed-off

rcar_gen3: plat: Add missing dependency to rcar_srecord

Add missing dependency on the bl2.elf and bl31.elf into the rcar_srecord
target, which uses those ELF files to generate the SRECs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: plat: Rename H3 label

Rename the H3 label to avoid confusing clang, which generates an error
if the label is just H3. Rename it to RCARH3.

Signed-off-by: Marek Vasut <marek.vasut+renesas

rcar_gen3: plat: Rename H3 label

Rename the H3 label to avoid confusing clang, which generates an error
if the label is just H3. Rename it to RCARH3.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

plat: rcar: Move FDT from x3 to x1

As suggested, pass the FDT to BL 33 via x1 instead of x3 , to be
consistent with the other platforms.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

plat: rcar: Generate FCNL reserved memory node

Generate a /reserved-memory node for FCNL in the DT passed to
subsequent stages, so they will know how the FCNL is configured.

Signed-off-by: Marek Va

plat: rcar: Generate FCNL reserved memory node

Generate a /reserved-memory node for FCNL in the DT passed to
subsequent stages, so they will know how the FCNL is configured.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

plat: rcar: Generate platform compatible string

Generate /compatible string for the platform, so that the subsequent
stages know which platform they are running on. This could be useful
when ie. bui

plat: rcar: Generate platform compatible string

Generate /compatible string for the platform, so that the subsequent
stages know which platform they are running on. This could be useful
when ie. building U-Boot that contains DTs for multiple platforms and
can thus decide on which platform it is running. This would ultimately
allow single bootloader binary for all Gen3 platforms.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

plat: rcar: Pass DTB with DRAM layout from BL2 to next stages

Pass DTB containing DRAM layout from BL2 to BL33 via register x3, so
that the BL33 can simply consume it and get accurate DRAM layout in

plat: rcar: Pass DTB with DRAM layout from BL2 to next stages

Pass DTB containing DRAM layout from BL2 to BL33 via register x3, so
that the BL33 can simply consume it and get accurate DRAM layout info.
BL33 is in most usecases U-Boot.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

plat: rcar: Use array in the DRAM size reporting

Use array of start-size tuples for the DRAM banks and call single
function which iterates over this array to report the DRAM info.
This is in prepara

plat: rcar: Use array in the DRAM size reporting

Use array of start-size tuples for the DRAM banks and call single
function which iterates over this array to report the DRAM info.
This is in preparation for expanding this to generate FDT for the
next stage.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

plat: rcar: Print DRAM configuration after init

Print the DRAM configuration only after the DRAM was initialized. This
will be useful when deduplicating code populating FDT passed to U-Boot,
since i

plat: rcar: Print DRAM configuration after init

Print the DRAM configuration only after the DRAM was initialized. This
will be useful when deduplicating code populating FDT passed to U-Boot,
since it will contain the same macros as bl2_advertise_dram_size().

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

plat: rcar: Fill in memory information for M3W, M3N

Make the DRAM configuration debug print consistent for all supported SoCs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>