core: Refactor console_init() and introduce plat_console_init()

Since there are some cross-platform console drivers, we let
console_init() be common code to have a chance to initialize those
console

core: Refactor console_init() and introduce plat_console_init()

Since there are some cross-platform console drivers, we let
console_init() be common code to have a chance to initialize those
console drivers (e.g., semihosting console).

If the cross-platform console drivers are not configured to be compiled,
plat_console_init() will be invoked to initialize platform-specific
console driver.

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

core: arm: plat-bcm: Force CFG_CORE_ARM64_PA_BITS=48

Set CFG_CORE_ARM64_PA_BITS in Broadcom platform file. This fixes a crash
when setting up memory addresses on the Broadcom stingray NS3 platform.

core: arm: plat-bcm: Force CFG_CORE_ARM64_PA_BITS=48

Set CFG_CORE_ARM64_PA_BITS in Broadcom platform file. This fixes a crash
when setting up memory addresses on the Broadcom stingray NS3 platform.

Signed-off-by: Stephen Carlson <stcarlso@microsoft.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

core: arm: Rename primary_init_intc() to boot_primary_init_intc()

Since interrupt controllers are usually initialized in boot stage,
rename primary_init_intc() to boot_primary_init_intc().

Signed-o

core: arm: Rename primary_init_intc() to boot_primary_init_intc()

Since interrupt controllers are usually initialized in boot stage,
rename primary_init_intc() to boot_primary_init_intc().

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

core: rename interrupt controller functions

This commit renames interrupt controller function names
to be more generic:
- Rename main_init_gic() to primary_init_intc()
- Rename secondary_init_gic()

core: rename interrupt controller functions

This commit renames interrupt controller function names
to be more generic:
- Rename main_init_gic() to primary_init_intc()
- Rename secondary_init_gic() to secondary_init_intc()

Signed-off-by: Marouene Boubakri <marouene.boubakri@nxp.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

drivers: gic: factorize call to gic_init() or gic_init_base_addr()

Platforms call either gic_init() or gic_init_base_addr() depending
on whether CFG_WITH_ARM_TRUSTED_FW is defined or not. This chang

drivers: gic: factorize call to gic_init() or gic_init_base_addr()

Platforms call either gic_init() or gic_init_base_addr() depending
on whether CFG_WITH_ARM_TRUSTED_FW is defined or not. This change
factorize this logic from gic_init() implementation and makes
gic_init_base_addr() local to gic.c.

For that purpose functions gic_init_base_address() and gic_dt_get_irq()
are moved inside gic.c source file.
source file.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

show more ...

core: define main interrupt controller data from its driver

All but one platforms define CPU core interrupt controller from their
platform main.c source file next to its main interrupt handler.
This

core: define main interrupt controller data from its driver

All but one platforms define CPU core interrupt controller from their
platform main.c source file next to its main interrupt handler.
This change factorize these implementation by moving the definition
of the controller data instance straight in the controller driver
source file. This change makes each controller driver to implement
straight itr_core_handler() function, preventing a extra branch on
interrupt execution. Interrupt controller driver initialization
function now straight calls itr_core_init().

This changes treats case when CFG_CORE_WORKAROUND_ARM_NMFI is enable
to not conflict with core/arch/arm/kernel/thread.c that already
overrides itr_core_handler() weak implementation.

With this change, the main controller initialization function
(gic_init(), gic_init_base_addr(), gic_cpu_init() and hfic_init())
no more gets the controller data as input argument.

As a consequence, definition of struct hfic_data and struct gic_data
moves from their respective driver header file to the respective
driver source file.

As a consequence, gic_dump() no more requires an argument.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

show more ...

core: plat-bcm: remove virtual address lookup from main_init_gic()

- Commit 60801696667d ("plat: arm: refactor GIC initialization")
refactored GIC initialization to have gic_init_base_addr() take

core: plat-bcm: remove virtual address lookup from main_init_gic()

- Commit 60801696667d ("plat: arm: refactor GIC initialization")
refactored GIC initialization to have gic_init_base_addr() take in a
physical address instead of a virtual one, meaning that a virtual
address lookup is no longer necessary within a platform's gic_init().
- BCM's main_init_gic() would still perform a virtual memory lookup and
hand over its virtual address instead of the expected physical one.
This caused the lookup in gic_init_base_addr() to fail and panic.
- This new commit removes the virtual memory lookup from BCM's
main_gic_init() and instead hands gic_init_base_addr() a physical
address.

Signed-off-by: Andrew Mustea <andrew.mustea@microsoft.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

core_mmu: fix phys_to_virt() to check length

phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because

core_mmu: fix phys_to_virt() to check length

phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.

core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.

Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)

show more ...