GIC: Add helpers to set interrupt configuration

The helpers perform read-modify-write on GIC*_ICFGR registers, but don't
serialise callers. Any serialisation must be taken care of by the
callers.

C

GIC: Add helpers to set interrupt configuration

The helpers perform read-modify-write on GIC*_ICFGR registers, but don't
serialise callers. Any serialisation must be taken care of by the
callers.

Change-Id: I71995f82ff2c7f70d37af0ede30d6ee18682fd3f
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

ARM platforms: Migrate to using interrupt properties

An earlier patch added provision for the platform to provide secure
interrupt properties. ARM platforms already has a list of interrupts
that fal

ARM platforms: Migrate to using interrupt properties

An earlier patch added provision for the platform to provide secure
interrupt properties. ARM platforms already has a list of interrupts
that fall into different secure groups.

This patch defines macros that enumerate interrupt properties in the
same fashion, and points the driver driver data to a list of interrupt
properties rather than list of secure interrupts on ARM platforms. The
deprecated interrupt list definitions are however retained to support
legacy builds.

Configuration applied to individual interrupts remain unchanged, so no
runtime behaviour change expected.

NOTE: Platforms that use the arm/common function
plat_arm_gic_driver_init() must replace their PLAT_ARM_G1S_IRQS and
PLAT_ARM_G0_IRQS macro definitions with PLAT_ARM_G1S_IRQ_PROPS and
PLAT_ARM_G0_IRQ_PROPS macros respectively, using the provided
INTR_PROP_DESC macro.

Change-Id: I24d643b83e3333753a3ba97d4b6fb71e16bb0952
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

GIC: Add API to set priority mask

API documentation updated.

Change-Id: I40feec1fe67a960d035061b54dd55610bc34ce1d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Add API to set/clear interrupt pending

API documentation updated.

Change-Id: I14e33cfc7dfa93257c82d76fae186b17a1b6d266
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswa

GIC: Add API to set/clear interrupt pending

API documentation updated.

Change-Id: I14e33cfc7dfa93257c82d76fae186b17a1b6d266
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

GIC: Add API to set interrupt routing

SPIs can be routed to either a specific PE, or to any one of all
available PEs.

API documentation updated.

Change-Id: I28675f634568aaf4ea1aa8aa7ebf25b419a963e

GIC: Add API to set interrupt routing

SPIs can be routed to either a specific PE, or to any one of all
available PEs.

API documentation updated.

Change-Id: I28675f634568aaf4ea1aa8aa7ebf25b419a963ed
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

GIC: Add API to raise secure SGI

API documentation updated.

Change-Id: I129725059299af6cc612bafa8d74817f779d7c4f
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Add APIs to set interrupt type and query support

The back end GIC driver converts and assigns the interrupt type to
suitable group.

For GICv2, a build option GICV2_G0_FOR_EL3 is introduced, wh

GIC: Add APIs to set interrupt type and query support

The back end GIC driver converts and assigns the interrupt type to
suitable group.

For GICv2, a build option GICV2_G0_FOR_EL3 is introduced, which
determines to which type Group 0 interrupts maps to.

- When the build option is set 0 (the default), Group 0 interrupts are
meant for Secure EL1. This is presently the case.

- Otherwise, Group 0 interrupts are meant for EL3. This means the SPD
will have to synchronously hand over the interrupt to Secure EL1.

The query API allows the platform to query whether the platform supports
interrupts of a given type.

API documentation updated.

Change-Id: I60fdb4053ffe0bd006b3b20914914ebd311fc858
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

GIC: Add API to set interrupt priority

API documentation updated.

Change-Id: Ib700eb1b8ca65503aeed0ac4ce0e7b934df67ff9
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambhar

GIC: Add API to set interrupt priority

API documentation updated.

Change-Id: Ib700eb1b8ca65503aeed0ac4ce0e7b934df67ff9
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

GIC: Add APIs to enable and disable interrupt

API documentation updated.

Change-Id: Ice7511f8df5356851001d2f7dc2a46cfe318f9ba
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Vis

GIC: Add APIs to enable and disable interrupt

API documentation updated.

Change-Id: Ice7511f8df5356851001d2f7dc2a46cfe318f9ba
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

GIC: Add API to get interrupt active status

API documentation updated.

Change-Id: I6d61785af0d5330930c709de971a904dc7c3516c
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswa

GIC: Add API to get interrupt active status

API documentation updated.

Change-Id: I6d61785af0d5330930c709de971a904dc7c3516c
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

GIC: Add APIs to query interrupt types

These APIs allow the GIC implementation to categorize interrupt numbers
into SPIs, PPIs, and SGIs. The default implementations for GICv2 and
GICv3 follows inte

GIC: Add APIs to query interrupt types

These APIs allow the GIC implementation to categorize interrupt numbers
into SPIs, PPIs, and SGIs. The default implementations for GICv2 and
GICv3 follows interrupt numbering as specified by the ARM GIC
architecture.

API documentation updated.

Change-Id: Ia6aa379dc955994333232e6138f259535d4fa087
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

ARM platforms: supply per-PE target mask array

Call the GICv2 driver API to initialise per-PE target mask.

Change-Id: Idc7eb0d906a5379f4c05917af05c90613057ab97
Signed-off-by: Jeenu Viswambharan <je

ARM platforms: supply per-PE target mask array

Call the GICv2 driver API to initialise per-PE target mask.

Change-Id: Idc7eb0d906a5379f4c05917af05c90613057ab97
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

GICv2: Add driver API to set PE target mask

The PE target mask is used to translate linear PE index (returned by
platform core position) to a bit mask used when targeting interrupts to
a PE, viz. wh

GICv2: Add driver API to set PE target mask

The PE target mask is used to translate linear PE index (returned by
platform core position) to a bit mask used when targeting interrupts to
a PE, viz. when raising SGIs and routing SPIs.

The platform shall:

- Populate the driver data with a pointer to array that's to contain
per-PE target masks.

- Invoke the new driver API 'gicv2_set_pe_target_mask()' during
per-CPU initialization so that the driver populates the target mask
for that CPU.

Platforms that don't intend to target interrupts or raise SGIs need not
populate this.

Change-Id: Ic0db54da86915e9dccd82fff51479bc3c1fdc968
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

GIC: Add API to get running priority

Document the API in separate platform interrupt controller API document.

Change-Id: If18f208e10a8a243f5c59d226fcf48e985941949
Co-authored-by: Yousuf A <yousuf.s

GIC: Add API to get running priority

Document the API in separate platform interrupt controller API document.

Change-Id: If18f208e10a8a243f5c59d226fcf48e985941949
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

Merge pull request #1123 from robertovargas-arm/reset2

Integration of reset2 PSCI v1.1 functionality

Fix use of MSR (immediate)

The macro DEFINE_SYSREG_WRITE_CONST_FUNC defines an inline function
to an assembly statement that uses the MSR (immediate) instruction
to access the PSTATE. The "i" (imme

Fix use of MSR (immediate)

The macro DEFINE_SYSREG_WRITE_CONST_FUNC defines an inline function
to an assembly statement that uses the MSR (immediate) instruction
to access the PSTATE. The "i" (immediate) assembly constraint on
the operand was only satisfied when compiling with optimizations
enabled which resulted in the function being optimized out - the
"const uint64_t v" parameter was optimized out and replaced by a
literal value.

When compiling without optimizations, the function call remained and
therefore the parameter is not optimized out - compilation fails as
the constraint is impossible to satisfy by the compiler.

This patch replaces the function encapsulating the use of
the MSR (immediate) with a macro that allows the literal value to be
directly fed to the inline assembly statement

Change-Id: Ib379a7acc48ef3cb83090a680cd8a6ce1a94a9d9
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

show more ...

docs: Update Trusted Board Boot Requirements document number

Update DEN0006B-5(2013) to DEN0006C-1(2015)

Change-Id: I753a14214dde827d004fd04c47b5ba112df38d73
Signed-off-by: Qixiang Xu <qixiang.xu@a

docs: Update Trusted Board Boot Requirements document number

Update DEN0006B-5(2013) to DEN0006C-1(2015)

Change-Id: I753a14214dde827d004fd04c47b5ba112df38d73
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>

show more ...

Merge pull request #1122 from EvanLloyd/ejll/62_fiptool1

fiptool: Precursor changes for Visual Studio

Update documentation to PSCI v1.1

This patch adds documentation about the new PCSI API to the porting guide
and it also update the version and function list in the firmware design.

Change-Id: Ie4ed

Update documentation to PSCI v1.1

This patch adds documentation about the new PCSI API to the porting guide
and it also update the version and function list in the firmware design.

Change-Id: Ie4edd190926a501922c061f5fcad53c9b389e331
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

show more ...

Add missed fields in documentation of plat_psci_ops

Change-Id: Ie4ee8aa2627573c95549927c9ac4e8a963035359
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Update PSCI version to 1.1

Updated the PSCI version conforming to the PSCI v1.1
specification (ARM DEN022D).

Change-Id: I1f34772ef6de37ec1ade719a1ab3aa062152d995
Signed-off-by: Roberto Vargas <robe

Update PSCI version to 1.1

Updated the PSCI version conforming to the PSCI v1.1
specification (ARM DEN022D).

Change-Id: I1f34772ef6de37ec1ade719a1ab3aa062152d995
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

show more ...

mem_protect: Fix PSCI FEATURES API for MEM_PROTECT_CHECK

With this patch the PSCI_FEATURES API correctly reports availability
of the PSCI_MEM_PROTECT_CHECK API - PSCI_MEM_CHK_RANGE_AARCH64 is
added

mem_protect: Fix PSCI FEATURES API for MEM_PROTECT_CHECK

With this patch the PSCI_FEATURES API correctly reports availability
of the PSCI_MEM_PROTECT_CHECK API - PSCI_MEM_CHK_RANGE_AARCH64 is
added to the PSCI capabilities mask, PSCI_CAP_64BIT_MASK

Change-Id: Ic90ee804deaadf0f948dc2d46ac5fe4121ef77ae
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

show more ...

Init and save / restore of PMCR_EL0 / PMCR

Currently TF does not initialise the PMCR_EL0 register in
the secure context or save/restore the register.

In particular, the DP field may not be set to o

Init and save / restore of PMCR_EL0 / PMCR

Currently TF does not initialise the PMCR_EL0 register in
the secure context or save/restore the register.

In particular, the DP field may not be set to one to prohibit
cycle counting in the secure state, even though event counting
generally is prohibited via the default setting of MDCR_EL3.SMPE
to 0.

This patch initialises PMCR_EL0.DP to one in the secure state
to prohibit cycle counting and also initialises other fields
that have an architectually UNKNOWN reset value.

Additionally, PMCR_EL0 is added to the list of registers that are
saved and restored during a world switch.

Similar changes are made for PMCR for the AArch32 execution state.

NOTE: secure world code at lower ELs that assume other values in PMCR_EL0
will be impacted.

Change-Id: Iae40e8c0a196d74053accf97063ebc257b4d2f3a
Signed-off-by: David Cunado <david.cunado@arm.com>

show more ...

reset2: Add css_system_reset2()

This function implements the platform dependant part of PSCI system
reset2 for CSS platforms using SCMI.

Change-Id: I724389decab484043cadf577aeed96b349c1466d
Signed-

reset2: Add css_system_reset2()

This function implements the platform dependant part of PSCI system
reset2 for CSS platforms using SCMI.

Change-Id: I724389decab484043cadf577aeed96b349c1466d
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

show more ...

scp: Introduce css_scp_system_off() function

The common implementation of css_scp_sys_shutdown and
css_scp_warm_reset is refactored into a new function,
css_scp_system_off() that allows the desired

scp: Introduce css_scp_system_off() function

The common implementation of css_scp_sys_shutdown and
css_scp_warm_reset is refactored into a new function,
css_scp_system_off() that allows the desired power state to be
specified.

The css_scp_system_off can be used in the implementation of
SYSTEM_RESET2 for PSCI v1.1.

Change-Id: I161e62354d3d75f969b8436d794335237520a9a4
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

show more ...