xref: /rk3399_ARM-atf/include/plat/common/platform.h (revision fc529fee720de5fef8388c52bfefcb807ac764b0)
1 /*
2  * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #ifndef __PLATFORM_H__
8 #define __PLATFORM_H__
9 
10 #include <psci.h>
11 #include <stdint.h>
12 #include <types.h>
13 
14 
15 /*******************************************************************************
16  * Forward declarations
17  ******************************************************************************/
18 struct auth_img_desc_s;
19 struct meminfo;
20 struct image_info;
21 struct entry_point_info;
22 struct bl31_params;
23 struct image_desc;
24 struct bl_load_info;
25 struct bl_params;
26 
27 /*******************************************************************************
28  * plat_get_rotpk_info() flags
29  ******************************************************************************/
30 #define ROTPK_IS_HASH			(1 << 0)
31 /* Flag used to skip verification of the certificate ROTPK while the platform
32    ROTPK is not deployed */
33 #define ROTPK_NOT_DEPLOYED		(1 << 1)
34 
35 /*******************************************************************************
36  * Function declarations
37  ******************************************************************************/
38 /*******************************************************************************
39  * Mandatory common functions
40  ******************************************************************************/
41 unsigned long long plat_get_syscnt_freq(void) __deprecated;
42 unsigned int plat_get_syscnt_freq2(void);
43 
44 int plat_get_image_source(unsigned int image_id,
45 			uintptr_t *dev_handle,
46 			uintptr_t *image_spec);
47 uintptr_t plat_get_ns_image_entrypoint(void);
48 unsigned int plat_my_core_pos(void);
49 int plat_core_pos_by_mpidr(u_register_t mpidr);
50 
51 #if STACK_PROTECTOR_ENABLED
52 /*
53  * Return a new value to be used for the stack protection's canary.
54  *
55  * Ideally, this value is a random number that is impossible to predict by an
56  * attacker.
57  */
58 u_register_t plat_get_stack_protector_canary(void);
59 #endif /* STACK_PROTECTOR_ENABLED */
60 
61 /*******************************************************************************
62  * Mandatory interrupt management functions
63  ******************************************************************************/
64 uint32_t plat_ic_get_pending_interrupt_id(void);
65 uint32_t plat_ic_get_pending_interrupt_type(void);
66 uint32_t plat_ic_acknowledge_interrupt(void);
67 uint32_t plat_ic_get_interrupt_type(uint32_t id);
68 void plat_ic_end_of_interrupt(uint32_t id);
69 uint32_t plat_interrupt_type_to_line(uint32_t type,
70 				     uint32_t security_state);
71 
72 /*******************************************************************************
73  * Optional interrupt management functions, depending on chosen EL3 components.
74  ******************************************************************************/
75 unsigned int plat_ic_get_running_priority(void);
76 int plat_ic_is_spi(unsigned int id);
77 int plat_ic_is_ppi(unsigned int id);
78 int plat_ic_is_sgi(unsigned int id);
79 unsigned int plat_ic_get_interrupt_active(unsigned int id);
80 void plat_ic_disable_interrupt(unsigned int id);
81 void plat_ic_enable_interrupt(unsigned int id);
82 int plat_ic_has_interrupt_type(unsigned int type);
83 void plat_ic_set_interrupt_type(unsigned int id, unsigned int type);
84 void plat_ic_set_interrupt_priority(unsigned int id, unsigned int priority);
85 void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target);
86 void plat_ic_set_spi_routing(unsigned int id, unsigned int routing_mode,
87 		u_register_t mpidr);
88 
89 /*******************************************************************************
90  * Optional common functions (may be overridden)
91  ******************************************************************************/
92 uintptr_t plat_get_my_stack(void);
93 void plat_report_exception(unsigned int exception_type);
94 int plat_crash_console_init(void);
95 int plat_crash_console_putc(int c);
96 int plat_crash_console_flush(void);
97 void plat_error_handler(int err) __dead2;
98 void plat_panic_handler(void) __dead2;
99 const char *plat_log_get_prefix(unsigned int log_level);
100 
101 /*******************************************************************************
102  * Mandatory BL1 functions
103  ******************************************************************************/
104 void bl1_early_platform_setup(void);
105 void bl1_plat_arch_setup(void);
106 void bl1_platform_setup(void);
107 struct meminfo *bl1_plat_sec_mem_layout(void);
108 
109 /*
110  * The following function is mandatory when the
111  * firmware update feature is used.
112  */
113 int bl1_plat_mem_check(uintptr_t mem_base, unsigned int mem_size,
114 		unsigned int flags);
115 
116 /*******************************************************************************
117  * Optional BL1 functions (may be overridden)
118  ******************************************************************************/
119 void bl1_init_bl2_mem_layout(const struct meminfo *bl1_mem_layout,
120 			     struct meminfo *bl2_mem_layout);
121 
122 /*
123  * The following functions are used for image loading process in BL1.
124  */
125 void bl1_plat_set_ep_info(unsigned int image_id,
126 		struct entry_point_info *ep_info);
127 /*
128  * The following functions are mandatory when firmware update
129  * feature is used and optional otherwise.
130  */
131 unsigned int bl1_plat_get_next_image_id(void);
132 struct image_desc *bl1_plat_get_image_desc(unsigned int image_id);
133 
134 /*
135  * The following functions are used by firmware update
136  * feature and may optionally be overridden.
137  */
138 __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved);
139 
140 
141 /*******************************************************************************
142  * Mandatory BL2 functions
143  ******************************************************************************/
144 void bl2_early_platform_setup(struct meminfo *mem_layout);
145 void bl2_plat_arch_setup(void);
146 void bl2_platform_setup(void);
147 struct meminfo *bl2_plat_sec_mem_layout(void);
148 
149 #if LOAD_IMAGE_V2
150 /*
151  * This function can be used by the platforms to update/use image
152  * information for given `image_id`.
153  */
154 int bl2_plat_handle_post_image_load(unsigned int image_id);
155 
156 #else /* LOAD_IMAGE_V2 */
157 
158 /*
159  * This function returns a pointer to the shared memory that the platform has
160  * kept aside to pass trusted firmware related information that BL31
161  * could need
162  */
163 struct bl31_params *bl2_plat_get_bl31_params(void);
164 
165 /*
166  * This function returns a pointer to the shared memory that the platform
167  * has kept to point to entry point information of BL31 to BL2
168  */
169 struct entry_point_info *bl2_plat_get_bl31_ep_info(void);
170 
171 /*
172  * This function flushes to main memory all the params that are
173  * passed to BL31
174  */
175 void bl2_plat_flush_bl31_params(void);
176 
177 /*
178  * The next 2 functions allow the platform to change the entrypoint information
179  * for the mandatory 3rd level BL images, BL31 and BL33. This is done after
180  * BL2 has loaded those images into memory but before BL31 is executed.
181  */
182 void bl2_plat_set_bl31_ep_info(struct image_info *image,
183 			       struct entry_point_info *ep);
184 
185 void bl2_plat_set_bl33_ep_info(struct image_info *image,
186 			       struct entry_point_info *ep);
187 
188 /* Gets the memory layout for BL33 */
189 void bl2_plat_get_bl33_meminfo(struct meminfo *mem_info);
190 
191 /*******************************************************************************
192  * Conditionally mandatory BL2 functions: must be implemented if SCP_BL2 image
193  * is supported
194  ******************************************************************************/
195 /* Gets the memory layout for SCP_BL2 */
196 void bl2_plat_get_scp_bl2_meminfo(struct meminfo *mem_info);
197 
198 /*
199  * This function is called after loading SCP_BL2 image and it is used to perform
200  * any platform-specific actions required to handle the SCP firmware.
201  */
202 int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info);
203 
204 /*******************************************************************************
205  * Conditionally mandatory BL2 functions: must be implemented if BL32 image
206  * is supported
207  ******************************************************************************/
208 void bl2_plat_set_bl32_ep_info(struct image_info *image,
209 			       struct entry_point_info *ep);
210 
211 /* Gets the memory layout for BL32 */
212 void bl2_plat_get_bl32_meminfo(struct meminfo *mem_info);
213 
214 #endif /* LOAD_IMAGE_V2 */
215 
216 /*******************************************************************************
217  * Optional BL2 functions (may be overridden)
218  ******************************************************************************/
219 
220 /*******************************************************************************
221  * Mandatory BL2U functions.
222  ******************************************************************************/
223 void bl2u_early_platform_setup(struct meminfo *mem_layout,
224 		void *plat_info);
225 void bl2u_plat_arch_setup(void);
226 void bl2u_platform_setup(void);
227 
228 /*******************************************************************************
229  * Conditionally mandatory BL2U functions for CSS platforms.
230  ******************************************************************************/
231 /*
232  * This function is used to perform any platform-specific actions required to
233  * handle the BL2U_SCP firmware.
234  */
235 int bl2u_plat_handle_scp_bl2u(void);
236 
237 /*******************************************************************************
238  * Mandatory BL31 functions
239  ******************************************************************************/
240 #if LOAD_IMAGE_V2
241 void bl31_early_platform_setup(void *from_bl2,
242 				void *plat_params_from_bl2);
243 #else
244 void bl31_early_platform_setup(struct bl31_params *from_bl2,
245 				void *plat_params_from_bl2);
246 #endif
247 void bl31_plat_arch_setup(void);
248 void bl31_platform_setup(void);
249 void bl31_plat_runtime_setup(void);
250 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type);
251 
252 /*******************************************************************************
253  * Mandatory PSCI functions (BL31)
254  ******************************************************************************/
255 int plat_setup_psci_ops(uintptr_t sec_entrypoint,
256 			const struct plat_psci_ops **);
257 const unsigned char *plat_get_power_domain_tree_desc(void);
258 
259 /*******************************************************************************
260  * Optional PSCI functions (BL31).
261  ******************************************************************************/
262 void plat_psci_stat_accounting_start(const psci_power_state_t *state_info);
263 void plat_psci_stat_accounting_stop(const psci_power_state_t *state_info);
264 u_register_t plat_psci_stat_get_residency(unsigned int lvl,
265 			const psci_power_state_t *state_info,
266 			int last_cpu_index);
267 plat_local_state_t plat_get_target_pwr_state(unsigned int lvl,
268 			const plat_local_state_t *states,
269 			unsigned int ncpu);
270 
271 /*******************************************************************************
272  * Optional BL31 functions (may be overridden)
273  ******************************************************************************/
274 void bl31_plat_enable_mmu(uint32_t flags);
275 
276 /*******************************************************************************
277  * Optional BL32 functions (may be overridden)
278  ******************************************************************************/
279 void bl32_plat_enable_mmu(uint32_t flags);
280 
281 /*******************************************************************************
282  * Trusted Board Boot functions
283  ******************************************************************************/
284 int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
285 			unsigned int *flags);
286 int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr);
287 int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr);
288 int plat_set_nv_ctr2(void *cookie, const struct auth_img_desc_s *img_desc,
289 		unsigned int nv_ctr);
290 
291 #if LOAD_IMAGE_V2
292 /*******************************************************************************
293  * Mandatory BL image load functions(may be overridden).
294  ******************************************************************************/
295 /*
296  * This function returns pointer to the list of images that the
297  * platform has populated to load.
298  */
299 struct bl_load_info *plat_get_bl_image_load_info(void);
300 
301 /*
302  * This function returns a pointer to the shared memory that the
303  * platform has kept aside to pass trusted firmware related
304  * information that next BL image could need.
305  */
306 struct bl_params *plat_get_next_bl_params(void);
307 
308 /*
309  * This function flushes to main memory all the params that are
310  * passed to next image.
311  */
312 void plat_flush_next_bl_params(void);
313 
314 #endif /* LOAD_IMAGE_V2 */
315 
316 #if ENABLE_PLAT_COMPAT
317 /*
318  * The below declarations are to enable compatibility for the platform ports
319  * using the old platform interface.
320  */
321 
322 /*******************************************************************************
323  * Optional common functions (may be overridden)
324  ******************************************************************************/
325 unsigned int platform_get_core_pos(unsigned long mpidr);
326 
327 /*******************************************************************************
328  * Mandatory PSCI Compatibility functions (BL31)
329  ******************************************************************************/
330 int platform_setup_pm(const plat_pm_ops_t **);
331 
332 unsigned int plat_get_aff_count(unsigned int, unsigned long);
333 unsigned int plat_get_aff_state(unsigned int, unsigned long);
334 #else /* __ENABLE_PLAT_COMPAT__ */
335 /*
336  * The below function enable Trusted Firmware components like SPDs which
337  * haven't migrated to the new platform API to compile on platforms which
338  * have the compatibility layer disabled.
339  */
340 unsigned int platform_get_core_pos(unsigned long mpidr) __deprecated;
341 
342 #endif /* __ENABLE_PLAT_COMPAT__ */
343 
344 #endif /* __PLATFORM_H__ */
345 
346