stm32mp1: check if the SoC is single core

Among the variants of STM32MP, the STM32MP151 is a single Cortex-A7 chip.
A function is added to check the part number of the SoC.
If it corresponds to STM3

stm32mp1: check if the SoC is single core

Among the variants of STM32MP, the STM32MP151 is a single Cortex-A7 chip.
A function is added to check the part number of the SoC.
If it corresponds to STM32MP151A or STM32MP151C, then the chip has a single
Cortex-A7.

Change-Id: Icac2015c5d03ce0bcb8e99bbaf1ec8ada34be49c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

show more ...

stm32mp1: print information about board

On STMicroelectronics boards, the board information is stored in OTP.
This OTP is described in device tree, in BSEC board_id node.

Change-Id: Ieccbdcb0483436

stm32mp1: print information about board

On STMicroelectronics boards, the board information is stored in OTP.
This OTP is described in device tree, in BSEC board_id node.

Change-Id: Ieccbdcb048343680faac8dc577b75c67ac106f5b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

show more ...

stm32mp1: print information about SoC

This information is located in DBGMCU registers.

Change-Id: I480aa046fed9992e3d9665b1f0520bc4b6cfdf30
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: add watchdog support

Introduce driver for STM32 IWDG peripheral (Independent Watchdog).
It is configured according to device tree content and should be enabled
from there.
The watchdog is

stm32mp1: add watchdog support

Introduce driver for STM32 IWDG peripheral (Independent Watchdog).
It is configured according to device tree content and should be enabled
from there.
The watchdog is not started by default. It can be started after an HW
reset if the dedicated OTP is fused.

The watchdog also needs to be frozen if a debugger is attached.
This is done by configuring the correct bits in DBGMCU.
This configuration is allowed by checking BSEC properties.

An increase of BL2 size is also required when adding this new code.

Change-Id: Ide7535d717885ce2f9c387cf17afd8b5607f3e7f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

show more ...

Replace __ASSEMBLY__ with compiler-builtin __ASSEMBLER__

NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.

All common C compilers predefine a macro called __ASSEMBLER__ when
pre

Replace __ASSEMBLY__ with compiler-builtin __ASSEMBLER__

NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.

All common C compilers predefine a macro called __ASSEMBLER__ when
preprocessing a .S file. There is no reason for TF-A to define it's own
__ASSEMBLY__ macro for this purpose instead. To unify code with the
export headers (which use __ASSEMBLER__ to avoid one extra dependency),
let's deprecate __ASSEMBLY__ and switch the code base over to the
predefined standard.

Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417
Signed-off-by: Julius Werner <jwerner@chromium.org>

show more ...

Remove MULTI_CONSOLE_API flag and references to it

The new API becomes the default one.

Change-Id: Ic1d602da3dff4f4ebbcc158b885295c902a24fec
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.co

Remove MULTI_CONSOLE_API flag and references to it

The new API becomes the default one.

Change-Id: Ic1d602da3dff4f4ebbcc158b885295c902a24fec
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

show more ...

stm32mp1: increase device tree size to 20kB

Change-Id: Idee966b6434aa038e54b6e7176749a7b65bdbe84
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: use unsigned values for SDMMC defines

Correct SDMMC macros to define unsigned values as expected by the
driver implementation.

Change-Id: Ib009f3df2cf26a9759d129eb571a27b2564770ce
Signed-

stm32mp1: use unsigned values for SDMMC defines

Correct SDMMC macros to define unsigned values as expected by the
driver implementation.

Change-Id: Ib009f3df2cf26a9759d129eb571a27b2564770ce
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

stm32mp1: remove useless LIBFDT_SRCS from PLAT_BL_COMMON_SOURCES

Remove inclusion of libfdt source files in source file list since these
are already included from generic libfdt.mk makefile.

Change

stm32mp1: remove useless LIBFDT_SRCS from PLAT_BL_COMMON_SOURCES

Remove inclusion of libfdt source files in source file list since these
are already included from generic libfdt.mk makefile.

Change-Id: If42624557c4d88ca85d70f83b1b08c58f50afe72
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

stm32mp1: add general SYSCFG management

The system configuration controller is mainly used to manage
the compensation cell and other IOs and system related settings.

The SYSCFG driver is in charge

stm32mp1: add general SYSCFG management

The system configuration controller is mainly used to manage
the compensation cell and other IOs and system related settings.

The SYSCFG driver is in charge of configuring masters on the interconnect,
IO compensation, low voltage boards, or pull-ups for boot pins.
All other configurations should be handled in Linux drivers requiring it.

Device tree files are also updated to manage vdd-supply regulator.

Change-Id: I10fb513761a7d1f2b7afedca9c723ad9d1bccf42
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

stm32mp1: move stm32_get_gpio_bank_clock() to private file

GPIOx clocks are specific to each STM32MP platforms.
This change moves function stm32_get_gpio_bank_clock() from stm32mp
common source file

stm32mp1: move stm32_get_gpio_bank_clock() to private file

GPIOx clocks are specific to each STM32MP platforms.
This change moves function stm32_get_gpio_bank_clock() from stm32mp
common source files to platform private stm32mp1_private.c source file.

Change-Id: I9616c0d3fe4d10af715d6f2d1550c13ab62c829a
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

clk: stm32mp1: move oscillator functions to generic file

Those functions are generic for parsing nodes from device tree
hence could be located in generic source file.

The oscillators description st

clk: stm32mp1: move oscillator functions to generic file

Those functions are generic for parsing nodes from device tree
hence could be located in generic source file.

The oscillators description structure is also moved to STM32MP1 clock
driver, as it is no more used in stm32mp1_clkfunc and cannot be in a
generic file.

Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

stm32mp1: add OP-TEE support

Support booting OP-TEE as BL32 boot stage and secure runtime
service.

OP-TEE executes in internal RAM and uses a secure DDR area to store
the pager pagestore. Memory ma

stm32mp1: add OP-TEE support

Support booting OP-TEE as BL32 boot stage and secure runtime
service.

OP-TEE executes in internal RAM and uses a secure DDR area to store
the pager pagestore. Memory mapping and TZC are configured accordingly
prior OP-TEE boot. OP-TEE image is expected in OP-TEE v2 format where
a header file describes the effective boot images. This change
post processes header file content to get OP-TEE load addresses
and set OP-TEE boot arguments.

Change-Id: I02ef8b915e4be3e95b27029357d799d70e01cd44
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

show more ...

stm32mp1: fix TZC400 configuration against non-secure DDR

This change disables secure accesses to non-secure DDR which are useless.
TF-A already maps non-secure memory with non-secure permissions th

stm32mp1: fix TZC400 configuration against non-secure DDR

This change disables secure accesses to non-secure DDR which are useless.
TF-A already maps non-secure memory with non-secure permissions thanks
to the MMU.

This change also corrects some inline comments.

Change-Id: Id4c20c9ee5c95a666dae6b7446ed80baf2d53fb0
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

show more ...

stm32mp1: remove useless define

Remove STM32MP_DDR_SPEED_DFLT that is not used in STM32MP1 TF-A code.

Change-Id: I780cdc4e93a8a9d997d50f67cfc582acd4a353d6
Signed-off-by: Yann Gautier <yann.gautier@

stm32mp1: remove useless define

Remove STM32MP_DDR_SPEED_DFLT that is not used in STM32MP1 TF-A code.

Change-Id: I780cdc4e93a8a9d997d50f67cfc582acd4a353d6
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

stm32mp1: add minimal support for co-processor Cortex-M4

STM32MP1 chip embeds a dual Cortex-A7 and a Cortex-M4.
The support for Cortex-M4 clocks is added when configuring the clock tree.
Some minima

stm32mp1: add minimal support for co-processor Cortex-M4

STM32MP1 chip embeds a dual Cortex-A7 and a Cortex-M4.
The support for Cortex-M4 clocks is added when configuring the clock tree.
Some minimal security features to allow communications between A7 and M4
are also added.

Change-Id: I60417e244a476f60a2758f4969700b2684056665
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

stm32mp1: update clock driver

Remove useless private structure in function prototypes.
Add a reference counter on clocks.
Prepare for future secured/shared/non-secured clocks.

Change-Id: I3dbed8172

stm32mp1: update clock driver

Remove useless private structure in function prototypes.
Add a reference counter on clocks.
Prepare for future secured/shared/non-secured clocks.

Change-Id: I3dbed81721da5ceff5e10b2c4155b1e340c036ee
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

show more ...

stm32mp1: use functions to retrieve some peripheral addresses

PWR, RCC, DDRPHYC & DDRCTRL addresses can be retrieved from device tree.
Platform asserts the value read from the DT are the SoC address

stm32mp1: use functions to retrieve some peripheral addresses

PWR, RCC, DDRPHYC & DDRCTRL addresses can be retrieved from device tree.
Platform asserts the value read from the DT are the SoC addresses.

Change-Id: I43f0890b51918a30c87ac067d3780ab27a0f59de
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

show more ...

stm32mp1: split clkfunc code

Create a new file stm32mp_clkfunc.c to put functions that could be common
between several platforms.

Change-Id: Ica915c796b162b2345056b33328acc05035a242c
Signed-off-by:

stm32mp1: split clkfunc code

Create a new file stm32mp_clkfunc.c to put functions that could be common
between several platforms.

Change-Id: Ica915c796b162b2345056b33328acc05035a242c
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

stm32mp1: update I2C and PMIC drivers

Regulator configuration at boot takes more information from DT.
I2C configuration from DT is done in I2C driver.
I2C driver manages more transfer modes.
The min

stm32mp1: update I2C and PMIC drivers

Regulator configuration at boot takes more information from DT.
I2C configuration from DT is done in I2C driver.
I2C driver manages more transfer modes.
The min voltage of buck1 should also be increased to 1.2V,
else the platform does not boot.

Heavily modifies stm32_i2c.c since many functions move inside the source
file to remove redundant declarations.

Change-Id: I0bee5d776cf3ff15e687427cd6abc06ab237d025
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

show more ...

stm32mp1: remove some dependencies on clocks and reset in drivers

Include all RCC, clocks and reset headers from stm32mp1_def.h
which if exported to the firmware through platform_def.h.
The same dep

stm32mp1: remove some dependencies on clocks and reset in drivers

Include all RCC, clocks and reset headers from stm32mp1_def.h
which if exported to the firmware through platform_def.h.
The same dependency removal is done in common code as well.
Some useless includes are also removed in stm32_sdmmc2 driver.

Change-Id: I731ea5775c3fdb7f7b0c388b93923ed5e84b8d3f
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

stm32mp1: make functions and macros more common

Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions
that can be used in drivers shared by different platforms.

Change-Id: I22

stm32mp1: make functions and macros more common

Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions
that can be used in drivers shared by different platforms.

Change-Id: I2295c44f5b1edac7e80a93c0e8dfd671b36e88e7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

show more ...

stm32mp1: split code between common and private parts

Some parts of code could be shared with platform derivatives,
or new platforms.
A new folder plat/st/common is created to put common parts.

stm

stm32mp1: split code between common and private parts

Some parts of code could be shared with platform derivatives,
or new platforms.
A new folder plat/st/common is created to put common parts.

stm32mp_common.h is a common API aggregate.

Remove some casts where applicable.
Fix some types where applicable.
Remove also some platform includes that are already in stm32mp1_def.h.

Change-Id: I46d763c8d9e15732d1ee7383207fd58206d7f583
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

show more ...

stm32mp1: set ETZPC controlled peripherals and GPIOZ as non-secure

Change-Id: I604b38ffa40e04c6e2aaede28e9f61335bbffdc0
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm322mp1: add BSEC service

This service, called with SMC from Non secure world, allows access to
some configurations saved in OTP fuses.

Change-Id: I92ba5614b2cb4a03260119e2cf74f2cd626a3431
Signed

stm322mp1: add BSEC service

This service, called with SMC from Non secure world, allows access to
some configurations saved in OTP fuses.

Change-Id: I92ba5614b2cb4a03260119e2cf74f2cd626a3431
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

show more ...