| /OK3568_Linux_fs/u-boot/arch/arm/include/asm/arch-rockchip/ |
| H A D | ioc_rk3562.h | 12 uint32_t gpio1a_iomux_sel_l; /* Address Offset: 0x0000 */
13 uint32_t gpio1a_iomux_sel_h; /* Address Offset: 0x0004 */
14 uint32_t gpio1b_iomux_sel_l; /* Address Offset: 0x0008 */
15 uint32_t gpio1b_iomux_sel_h; /* Address Offset: 0x000C */
16 uint32_t gpio1c_iomux_sel_l; /* Address Offset: 0x0010 */
17 uint32_t gpio1c_iomux_sel_h; /* Address Offset: 0x0014 */
18 uint32_t gpio1d_iomux_sel_l; /* Address Offset: 0x0018 */
19 uint32_t gpio1d_iomux_sel_h; /* Address Offset: 0x001C */
20 uint32_t gpio2a_iomux_sel_l; /* Address Offset: 0x0020 */
21 uint32_t reserved0024[23]; /* Address Offset: 0x0024 */
[all …]
|
| H A D | grf_rk3588.h | 12 uint32_t wdt_con0; /* Address Offset: 0x0000 */
13 uint32_t reserved0004[3]; /* Address Offset: 0x0004 */
14 uint32_t uart_con0; /* Address Offset: 0x0010 */
15 uint32_t uart_con1; /* Address Offset: 0x0014 */
16 uint32_t reserved0018[42]; /* Address Offset: 0x0018 */
17 uint32_t gic_con0; /* Address Offset: 0x00C0 */
18 uint32_t reserved00c4[79]; /* Address Offset: 0x00C4 */
19 uint32_t memcfg_con0; /* Address Offset: 0x0200 */
20 uint32_t memcfg_con1; /* Address Offset: 0x0204 */
21 uint32_t memcfg_con2; /* Address Offset: 0x0208 */
[all …]
|
| H A D | ioc_rk3528.h | 12 uint32_t gpio0a_iomux_sel_l; /* Address Offset: 0x0000 */
13 uint32_t gpio0a_iomux_sel_h; /* Address Offset: 0x0004 */
14 uint32_t reserved0008[62]; /* Address Offset: 0x0008 */
15 uint32_t gpio0a_ds[3]; /* Address Offset: 0x0100 */
16 uint32_t reserved010c[61]; /* Address Offset: 0x010C */
17 uint32_t gpio0a_pull; /* Address Offset: 0x0200 */
18 uint32_t reserved0204[63]; /* Address Offset: 0x0204 */
19 uint32_t gpio0a_ie; /* Address Offset: 0x0300 */
20 uint32_t reserved0304[63]; /* Address Offset: 0x0304 */
21 uint32_t gpio0a_smt; /* Address Offset: 0x0400 */
[all …]
|
| H A D | ioc_rk3588.h | 12 uint32_t reserved0000[3]; /* Address Offset: 0x0000 */
13 uint32_t gpio0b_iomux_sel_h; /* Address Offset: 0x000C */
14 uint32_t gpio0c_iomux_sel_l; /* Address Offset: 0x0010 */
15 uint32_t gpio0c_iomux_sel_h; /* Address Offset: 0x0014 */
16 uint32_t gpio0d_iomux_sel_l; /* Address Offset: 0x0018 */
17 uint32_t gpio0d_iomux_sel_h; /* Address Offset: 0x001C */
18 uint32_t gpio1a_iomux_sel_l; /* Address Offset: 0x0020 */
19 uint32_t gpio1a_iomux_sel_h; /* Address Offset: 0x0024 */
20 uint32_t gpio1b_iomux_sel_l; /* Address Offset: 0x0028 */
21 uint32_t gpio1b_iomux_sel_h; /* Address Offset: 0x002C */
[all …]
|
| H A D | grf_rk3528.h | 15 uint32_t gmac1_con0; /* Address Offset: 0x40018 */
16 uint32_t gmac1_con1; /* Address Offset: 0x4001c */
20 uint32_t gmac0_con; /* Address Offset: 0x60018 */
21 uint32_t macphy_con0; /* Address Offset: 0x6001c */
22 uint32_t macphy_con1; /* Address Offset: 0x60020 */
23 uint32_t sdmmc_con0; /* Address Offset: 0x60024 */
24 uint32_t sdmmc_con1; /* Address Offset: 0x60028 */
28 uint32_t soc_con[8]; /* Address Offset: 0x70000 */
29 uint32_t soc_status; /* Address Offset: 0x70020 */
30 uint32_t reserved3[3]; /* Address Offset: 0x70024 */
[all …]
|
| /OK3568_Linux_fs/kernel/drivers/gpu/drm/amd/include/ |
| H A D | v10_structs.h | 29 uint32_t reserved_0; // offset: 0 (0x0)
30 uint32_t reserved_1; // offset: 1 (0x1)
31 uint32_t reserved_2; // offset: 2 (0x2)
32 uint32_t reserved_3; // offset: 3 (0x3)
33 uint32_t reserved_4; // offset: 4 (0x4)
34 uint32_t reserved_5; // offset: 5 (0x5)
35 uint32_t reserved_6; // offset: 6 (0x6)
36 uint32_t reserved_7; // offset: 7 (0x7)
37 uint32_t reserved_8; // offset: 8 (0x8)
38 uint32_t reserved_9; // offset: 9 (0x9)
[all …]
|
| /OK3568_Linux_fs/kernel/arch/s390/kernel/ |
| H A D | asm-offsets.c | 24 OFFSET(__TASK_stack, task_struct, stack); in main()
25 OFFSET(__TASK_thread, task_struct, thread); in main()
26 OFFSET(__TASK_pid, task_struct, pid); in main()
29 OFFSET(__THREAD_ksp, thread_struct, ksp); in main()
30 OFFSET(__THREAD_sysc_table, thread_struct, sys_call_table); in main()
31 OFFSET(__THREAD_last_break, thread_struct, last_break); in main()
32 OFFSET(__THREAD_FPU_fpc, thread_struct, fpu.fpc); in main()
33 OFFSET(__THREAD_FPU_regs, thread_struct, fpu.regs); in main()
34 OFFSET(__THREAD_per_cause, thread_struct, per_event.cause); in main()
35 OFFSET(__THREAD_per_address, thread_struct, per_event.address); in main()
[all …]
|
| /OK3568_Linux_fs/kernel/arch/powerpc/kernel/ |
| H A D | asm-offsets.c | 81 OFFSET(THREAD, task_struct, thread); in main()
82 OFFSET(MM, task_struct, mm); in main()
84 OFFSET(TASK_CANARY, task_struct, stack_canary); in main()
86 OFFSET(PACA_CANARY, paca_struct, canary); in main()
89 OFFSET(MMCONTEXTID, mm_struct, context.id); in main()
94 OFFSET(KSP_LIMIT, thread_struct, ksp_limit); in main()
96 OFFSET(RTAS_SP, thread_struct, rtas_sp); in main()
99 OFFSET(TASK_STACK, task_struct, stack); in main()
101 OFFSET(TASK_CPU, task_struct, cpu); in main()
105 OFFSET(TI_livepatch_sp, thread_info, livepatch_sp); in main()
[all …]
|
| /OK3568_Linux_fs/kernel/arch/mips/kernel/ |
| H A D | asm-offsets.c | 29 OFFSET(PT_R0, pt_regs, regs[0]); in output_ptreg_defines()
30 OFFSET(PT_R1, pt_regs, regs[1]); in output_ptreg_defines()
31 OFFSET(PT_R2, pt_regs, regs[2]); in output_ptreg_defines()
32 OFFSET(PT_R3, pt_regs, regs[3]); in output_ptreg_defines()
33 OFFSET(PT_R4, pt_regs, regs[4]); in output_ptreg_defines()
34 OFFSET(PT_R5, pt_regs, regs[5]); in output_ptreg_defines()
35 OFFSET(PT_R6, pt_regs, regs[6]); in output_ptreg_defines()
36 OFFSET(PT_R7, pt_regs, regs[7]); in output_ptreg_defines()
37 OFFSET(PT_R8, pt_regs, regs[8]); in output_ptreg_defines()
38 OFFSET(PT_R9, pt_regs, regs[9]); in output_ptreg_defines()
[all …]
|
| /OK3568_Linux_fs/u-boot/board/siemens/draco/ |
| H A D | mux.c | 23 {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
24 {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
29 {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */
30 {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
35 {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
37 {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
43 {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
44 {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
45 {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
46 {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
[all …]
|
| /OK3568_Linux_fs/u-boot/board/siemens/rut/ |
| H A D | mux.c | 23 {OFFSET(uart0_rxd), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* UART0_RXD */
24 {OFFSET(uart0_txd), (MODE(0) | PULLUDDIS)}, /* UART0_TXD */
29 {OFFSET(ddr_resetn), (MODE(0))},
30 {OFFSET(ddr_csn0), (MODE(0) | PULLUP_EN)},
31 {OFFSET(ddr_ck), (MODE(0))},
32 {OFFSET(ddr_nck), (MODE(0))},
33 {OFFSET(ddr_casn), (MODE(0) | PULLUP_EN)},
34 {OFFSET(ddr_rasn), (MODE(0) | PULLUP_EN)},
35 {OFFSET(ddr_wen), (MODE(0) | PULLUP_EN)},
36 {OFFSET(ddr_ba0), (MODE(0) | PULLUP_EN)},
[all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/include/asm/arch-am33xx/ |
| H A D | cpu.h | 78 unsigned int wkclkstctrl; /* offset 0x00 */
79 unsigned int wkctrlclkctrl; /* offset 0x04 */
80 unsigned int wkgpio0clkctrl; /* offset 0x08 */
81 unsigned int wkl4wkclkctrl; /* offset 0x0c */
82 unsigned int timer0clkctrl; /* offset 0x10 */
84 unsigned int idlestdpllmpu; /* offset 0x20 */
87 unsigned int clkseldpllmpu; /* offset 0x2c */
89 unsigned int idlestdpllddr; /* offset 0x34 */
91 unsigned int clkseldpllddr; /* offset 0x40 */
93 unsigned int clkseldplldisp; /* offset 0x54 */
[all …]
|
| /OK3568_Linux_fs/kernel/include/video/ |
| H A D | mach64.h | 20 #define CRTC_H_TOTAL_DISP 0x0000 /* Dword offset 0_00 */
21 #define CRTC2_H_TOTAL_DISP 0x0000 /* Dword offset 0_00 */
22 #define CRTC_H_SYNC_STRT_WID 0x0004 /* Dword offset 0_01 */
23 #define CRTC2_H_SYNC_STRT_WID 0x0004 /* Dword offset 0_01 */
30 #define CRTC_V_TOTAL_DISP 0x0008 /* Dword offset 0_02 */
31 #define CRTC2_V_TOTAL_DISP 0x0008 /* Dword offset 0_02 */
36 #define CRTC_V_SYNC_STRT_WID 0x000C /* Dword offset 0_03 */
37 #define CRTC2_V_SYNC_STRT_WID 0x000C /* Dword offset 0_03 */
42 #define CRTC_VLINE_CRNT_VLINE 0x0010 /* Dword offset 0_04 */
43 #define CRTC2_VLINE_CRNT_VLINE 0x0010 /* Dword offset 0_04 */
[all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/include/asm/arch-tegra/ |
| H A D | pmc.h | 13 uint pmc_cntrl; /* _CNTRL_0, offset 00 */
14 uint pmc_sec_disable; /* _SEC_DISABLE_0, offset 04 */
15 uint pmc_pmc_swrst; /* _PMC_SWRST_0, offset 08 */
16 uint pmc_wake_mask; /* _WAKE_MASK_0, offset 0C */
17 uint pmc_wake_lvl; /* _WAKE_LVL_0, offset 10 */
18 uint pmc_wake_status; /* _WAKE_STATUS_0, offset 14 */
19 uint pmc_sw_wake_status; /* _SW_WAKE_STATUS_0, offset 18 */
20 uint pmc_dpd_pads_oride; /* _DPD_PADS_ORIDE_0, offset 1C */
21 uint pmc_dpd_sample; /* _DPD_PADS_SAMPLE_0, offset 20 */
22 uint pmc_dpd_enable; /* _DPD_PADS_ENABLE_0, offset 24 */
[all …]
|
| /OK3568_Linux_fs/kernel/arch/c6x/kernel/ |
| H A D | asm-offsets.c | 16 OFFSET(REGS_A16, pt_regs, a16); in foo()
17 OFFSET(REGS_A17, pt_regs, a17); in foo()
18 OFFSET(REGS_A18, pt_regs, a18); in foo()
19 OFFSET(REGS_A19, pt_regs, a19); in foo()
20 OFFSET(REGS_A20, pt_regs, a20); in foo()
21 OFFSET(REGS_A21, pt_regs, a21); in foo()
22 OFFSET(REGS_A22, pt_regs, a22); in foo()
23 OFFSET(REGS_A23, pt_regs, a23); in foo()
24 OFFSET(REGS_A24, pt_regs, a24); in foo()
25 OFFSET(REGS_A25, pt_regs, a25); in foo()
[all …]
|
| /OK3568_Linux_fs/u-boot/board/bosch/shc/ |
| H A D | mux.c | 22 {OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | RXACTIVE)}, /* UART0_RXD */
23 {OFFSET(uart0_txd), (MODE(0) | PULLUDDIS)}, /* UART0_TXD */
24 {OFFSET(uart0_ctsn), (MODE(0) | PULLUDEN | RXACTIVE)}, /* UART0_CTS */
25 {OFFSET(uart0_rtsn), (MODE(0) | PULLUDDIS)}, /* UART0_RTS */
30 {OFFSET(uart1_rxd), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* UART1_RXD */
31 {OFFSET(uart1_txd), (MODE(0) | PULLUDDIS)}, /* UART1_TXD */
32 {OFFSET(uart1_ctsn), (MODE(0) | PULLUDEN | RXACTIVE)}, /* UART1_CTS */
33 {OFFSET(uart1_rtsn), (MODE(0) | PULLUDDIS)}, /* UART1_RTS */
38 {OFFSET(spi0_sclk), (MODE(1) | PULLUDDIS | RXACTIVE)}, /* UART2_RXD */
39 {OFFSET(spi0_d0), (MODE(1) | PULLUDDIS)}, /* UART2_TXD */
[all …]
|
| /OK3568_Linux_fs/kernel/drivers/clk/meson/ |
| H A D | gxbb.h | 17 #define SCR 0x2C /* 0x0b offset in data sheet */
18 #define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */
20 #define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
21 #define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
22 #define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */
23 #define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */
24 #define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */
25 #define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */
27 #define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */
28 #define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */
[all …]
|
| /OK3568_Linux_fs/u-boot/arch/x86/include/asm/arch-baytrail/fsp/ |
| H A D | fsp_vpd.h | 32 uint64_t signature; /* Offset 0x0000 */
33 uint8_t reserved0[24]; /* Offset 0x0008 */
34 uint16_t mrc_init_tseg_size; /* Offset 0x0020 */
35 uint16_t mrc_init_mmio_size; /* Offset 0x0022 */
36 uint8_t mrc_init_spd_addr1; /* Offset 0x0024 */
37 uint8_t mrc_init_spd_addr2; /* Offset 0x0025 */
38 uint8_t emmc_boot_mode; /* Offset 0x0026 */
39 uint8_t enable_sdio; /* Offset 0x0027 */
40 uint8_t enable_sdcard; /* Offset 0x0028 */
41 uint8_t enable_hsuart0; /* Offset 0x0029 */
[all …]
|
| /OK3568_Linux_fs/u-boot/board/BuR/brppt1/ |
| H A D | mux.c | 21 {OFFSET(uart0_rtsn), (MODE(0) | PULLUDEN)},
23 {OFFSET(uart0_ctsn), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
25 {OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
27 {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
32 {OFFSET(uart1_rtsn), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
34 {OFFSET(uart1_ctsn), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
36 {OFFSET(uart1_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
38 {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
43 {OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT7 */
44 {OFFSET(gpmc_ad6), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT6 */
[all …]
|
| /OK3568_Linux_fs/kernel/drivers/misc/rk628/ |
| H A D | rk628_pinctrl.c | 10 static int rk628_calc_mux_offset(struct rk628 *rk628, int mux, int reg, int offset) in rk628_calc_mux_offset() argument
18 val = BIT(offset) | orig; in rk628_calc_mux_offset()
20 val = ~BIT(offset) & orig; in rk628_calc_mux_offset()
23 if (offset >= 4 && offset < 8) { in rk628_calc_mux_offset()
24 offset += offset - 4; in rk628_calc_mux_offset()
25 val = 0x3 << (offset + 16) | (mux << offset); in rk628_calc_mux_offset()
26 } else if (offset > 7) { in rk628_calc_mux_offset()
27 offset += 4; in rk628_calc_mux_offset()
28 val = BIT(offset + 16) | (mux << offset); in rk628_calc_mux_offset()
30 val = BIT(offset + 16) | (mux << offset); in rk628_calc_mux_offset()
[all …]
|
| /OK3568_Linux_fs/u-boot/board/siemens/pxm2/ |
| H A D | mux.c | 24 {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
25 {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
26 {OFFSET(nnmi), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_TXD */
32 {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
33 {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
34 {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
35 {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
36 {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
37 {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
38 {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
[all …]
|
| /OK3568_Linux_fs/u-boot/board/ti/am335x/ |
| H A D | mux.c | 26 {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
27 {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
32 {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */
33 {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */
38 {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */
39 {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */
44 {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */
45 {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
50 {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */
51 {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */
[all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/include/asm/arch-tegra124/ |
| H A D | mc.h | 14 u32 reserved0[4]; /* offset 0x00 - 0x0C */
15 u32 mc_smmu_config; /* offset 0x10 */
16 u32 mc_smmu_tlb_config; /* offset 0x14 */
17 u32 mc_smmu_ptc_config; /* offset 0x18 */
18 u32 mc_smmu_ptb_asid; /* offset 0x1C */
19 u32 mc_smmu_ptb_data; /* offset 0x20 */
20 u32 reserved1[3]; /* offset 0x24 - 0x2C */
21 u32 mc_smmu_tlb_flush; /* offset 0x30 */
22 u32 mc_smmu_ptc_flush; /* offset 0x34 */
23 u32 reserved2[6]; /* offset 0x38 - 0x4C */
[all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/include/asm/arch-tegra210/ |
| H A D | mc.h | 14 u32 reserved0[4]; /* offset 0x00 - 0x0C */
15 u32 mc_smmu_config; /* offset 0x10 */
16 u32 mc_smmu_tlb_config; /* offset 0x14 */
17 u32 mc_smmu_ptc_config; /* offset 0x18 */
18 u32 mc_smmu_ptb_asid; /* offset 0x1C */
19 u32 mc_smmu_ptb_data; /* offset 0x20 */
20 u32 reserved1[3]; /* offset 0x24 - 0x2C */
21 u32 mc_smmu_tlb_flush; /* offset 0x30 */
22 u32 mc_smmu_ptc_flush; /* offset 0x34 */
23 u32 reserved2[6]; /* offset 0x38 - 0x4C */
[all …]
|
| /OK3568_Linux_fs/external/rkwifibt/drivers/rtl8852be/phl/hal_g6/phy/rf/halrf_8852b/ |
| H A D | halrf_efuse_8852b.c | 35 u32 offset = 0; in halrf_get_efuse_info_8852b() local
43 offset = 0; in halrf_get_efuse_info_8852b()
47 offset = 0; in halrf_get_efuse_info_8852b()
51 offset = 0; in halrf_get_efuse_info_8852b()
55 offset = EFUSE_INFO_RF_RFE_8852B_ADDR; in halrf_get_efuse_info_8852b()
59 offset = 0; in halrf_get_efuse_info_8852b()
63 offset = EFUSE_INFO_RF_BOARD_OPTION_8852B_ADDR; in halrf_get_efuse_info_8852b()
67 offset = EFUSE_INFO_RF_CHAN_PLAN_8852B_ADDR; in halrf_get_efuse_info_8852b()
71 offset = 0; in halrf_get_efuse_info_8852b()
76 offset = EFUSE_INFO_RF_2G_CCK_A_TSSI_DE_1_8852B_ADDR; in halrf_get_efuse_info_8852b()
[all …]
|