| 2480e4c3 | 25-Sep-2020 |
Manish Pandey <manish.pandey2@arm.com> |
doc: spm: update messaging method field
As per FF-A v1.0 spec, Table 3.1, messaging method field also contains
information about whether partition supports managed exit or not.
Since a partition can
doc: spm: update messaging method field
As per FF-A v1.0 spec, Table 3.1, messaging method field also contains
information about whether partition supports managed exit or not.
Since a partition can support managed exit only if it supports direct
messaging, so there are two new possible values, managed exit with only
direct messaging or with both messaging methods.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ic77cfb37d70975c3a36c56f8b7348d385735f378
show more ...
|
| 76a21174 | 12-Feb-2021 |
Mikael Olsson <mikael.olsson@arm.com> |
Add SiP service to configure Arm Ethos-N NPU
By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still
Add SiP service to configure Arm Ethos-N NPU
By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still allow the non-secure world to use the NPU, a SiP service has
been added that can delegate non-secure access to the registers needed
to use it.
Only the HW_CONFIG for the Arm Juno platform has been updated to include
the device tree for the NPU and the platform currently only loads the
HW_CONFIG in AArch64 builds.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2
show more ...
|
| 5d5fb10f | 12-Feb-2021 |
Mikael Olsson <mikael.olsson@arm.com> |
plat/arm/juno: Add support to use hw_config in BL31
To make it possible to use the hw_config device tree for dynamic
configuration in BL31 on the Arm Juno platform. A placeholder hw_config
has been
plat/arm/juno: Add support to use hw_config in BL31
To make it possible to use the hw_config device tree for dynamic
configuration in BL31 on the Arm Juno platform. A placeholder hw_config
has been added that is included in the FIP and a Juno specific BL31
setup has been added to populate fconf with the hw_config.
Juno's BL2 setup has been updated to align it with the new behavior
implemented in the Arm FVP platform, where fw_config is passed in arg1
to BL31 instead of soc_fw_config. The BL31 setup is expected to use the
fw_config passed in arg1 to find the hw_config.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Ib3570faa6714f92ab8451e8f1e59779dcf19c0b6
show more ...
|
| a9e14e20 | 20-Apr-2021 |
Manish Pandey <manish.pandey2@arm.com> |
Merge "docs: marvell: Add information about CZ.NIC Armada 3720 Secure Firmware" into integration |
| 718dbcac | 12-Oct-2020 |
Konstantin Porotchkin <kostap@marvell.com> |
plat/marvell/armada: allow builds without MSS support
Setting MSS_SUPPORT to 0 also removes requirement for SCP_BL2
definition.
Images build with MSS_SUPPORT=0 will not include service CPUs
FW and w
plat/marvell/armada: allow builds without MSS support
Setting MSS_SUPPORT to 0 also removes requirement for SCP_BL2
definition.
Images build with MSS_SUPPORT=0 will not include service CPUs
FW and will not support PM, FC and other features implemented
in these FW images.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Idf301ebd218ce65a60f277f3876d0aeb6c72f105
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/37769
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
show more ...
|
| 4ec3ccb4 | 28-Feb-2021 |
Madhukar Pappireddy <madhukar.pappireddy@arm.com> |
Add documentation for SMMUv3 driver in Hafnium(SPM)
Change-Id: I0b38c114fd2958d2b4040585611cafa132ccfd9c
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com> |
| d97bade1 | 09-Dec-2020 |
Chris Kay <chris.kay@arm.com> |
build(hooks): add commitlint hook
This change adds a configuration for commitlint - a tool designed to
enforce a particular commit message style - and run it as part of Git's
commit-msg hook. This v
build(hooks): add commitlint hook
This change adds a configuration for commitlint - a tool designed to
enforce a particular commit message style - and run it as part of Git's
commit-msg hook. This validates commits immediately after the editor has
been exited, and the configuration is derived from the configuration we
provide to Commitizen.
While the configuration provided suggests a maximum header and body
length, neither of these are hard errors. This is to accommodate the
occasional commit where it may be difficult or impossible to comply
with the length requirements (for example, with a particularly long
scope, or a long URL in the message body).
Change-Id: Ib5e90472fd1f1da9c2bff47703c9682232ee5679
Signed-off-by: Chris Kay <chris.kay@arm.com>
show more ...
|
| ba39362f | 09-Dec-2020 |
Chris Kay <chris.kay@arm.com> |
build(hooks): add Husky configuration
Husky is a tool for managing Git hooks within the repository itself.
Traditionally, commit hooks need to be manually installed on a per-user
basis, but Husky al
build(hooks): add Husky configuration
Husky is a tool for managing Git hooks within the repository itself.
Traditionally, commit hooks need to be manually installed on a per-user
basis, but Husky allows us to install these hooks either automatically
when `npm install` is invoked within the repository, or manually with
`npx husky install`.
This will become useful for us in the next few patches when we begin
introducing tools for enforcing a commit message style.
Change-Id: I64cae147e9ea910347416cfe0bcc4652ec9b4830
Signed-off-by: Chris Kay <chris.kay@arm.com>
show more ...
|
| 641c5ff6 | 14-Apr-2021 |
Manish V Badarkhe <Manish.Badarkhe@arm.com> |
docs: Update Mbed TLS supported version
Updated the documentation with latest Mbed TLS supported
version i.e. Mbed TLS v2.26.0
Fixes available in this version of Mbed TLS mainly affect
key generati
docs: Update Mbed TLS supported version
Updated the documentation with latest Mbed TLS supported
version i.e. Mbed TLS v2.26.0
Fixes available in this version of Mbed TLS mainly affect
key generation/writing and certificates writing, which
are features used in the cert_create tool.
Release notes of Mbed TLSv2.26.0 are available here:
https://github.com/ARMmbed/mbedtls/releases/tag/v2.26.0
Change-Id: Ie15ee45d878b7681e15ec4bf64d54b416a31aa2f
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
show more ...
|
| 511c7f3a | 13-Apr-2021 |
Madhukar Pappireddy <madhukar.pappireddy@arm.com> |
Merge changes from topic "dcc_console" into integration
* changes:
plat:xilinx:versal: Add JTAG DCC support
plat:xilinx:zynqmp: Add JTAG DCC support
drivers: dcc: Support JTAG DCC console |
| 4fe571b8 | 08-Apr-2021 |
Pali Rohár <pali@kernel.org> |
docs: marvell: Add information about CZ.NIC Armada 3720 Secure Firmware
CZ.NIC as part of Turris project released free and open source WTMI
application firmware 'wtmi_app.bin' for all Armada 3720 de
docs: marvell: Add information about CZ.NIC Armada 3720 Secure Firmware
CZ.NIC as part of Turris project released free and open source WTMI
application firmware 'wtmi_app.bin' for all Armada 3720 devices. This
firmware includes additional features like access to Hardware Random
Number Generator of Armada 3720 SoC which original Marvell's 'fuse.bin'
image does not have.
CZ.NIC's Armada 3720 Secure Firmware is available at website:
https://gitlab.nic.cz/turris/mox-boot-builder/
This change updates documentation to include steps how to build Marvell
firmware image for Espressobin with this firmware to enable Hardware
Random Number Generator on Espressobin.
In this change is fixed also URL to TF-A and U-Boot git repositories in
Espressobin build example. And as Marvell github repositories switched
default branch to master, explicit branch via -b parameter is redundant
and therefore from examples removed.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I59ee29cb6ed149264c5e4202f2af8f9ab3859418
show more ...
|
| a492edc4 | 23-Mar-2021 |
laurenw-arm <lauren.wehrmeister@arm.com> |
lib/cpu: Workaround for Cortex A77 erratum 1946167
Cortex A77 erratum 1946167 is a Cat B erratum that applies to revisions
<= r1p1. This erratum is avoided by inserting a DMB ST before acquire
atomi
lib/cpu: Workaround for Cortex A77 erratum 1946167
Cortex A77 erratum 1946167 is a Cat B erratum that applies to revisions
<= r1p1. This erratum is avoided by inserting a DMB ST before acquire
atomic instructions without release semantics through a series of
writes to implementation defined system registers.
SDEN can be found here:
https://documentation-service.arm.com/static/600057a29b9c2d1bb22cd1be?token=
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I53e3b4fb7e7575ec83d75c2f132eda5ae0b4f01f
show more ...
|
| 0b25f404 | 27-Nov-2020 |
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> |
plat:xilinx:versal: Add JTAG DCC support
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Mic
plat:xilinx:versal: Add JTAG DCC support
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I77994ce387caf0d695986df3d01d414a920978d0
show more ...
|
| c00baeec | 27-Nov-2020 |
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> |
plat:xilinx:zynqmp: Add JTAG DCC support
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Mic
plat:xilinx:zynqmp: Add JTAG DCC support
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I62cfbb57ae7e454fbc91d1c54aafa6e99f9a35c8
show more ...
|
| e5936205 | 27-Nov-2020 |
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> |
drivers: dcc: Support JTAG DCC console
The legacy console is gone. Re-add DCC console support based
on the multi-console framework.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilin
drivers: dcc: Support JTAG DCC console
The legacy console is gone. Re-add DCC console support based
on the multi-console framework.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Ia8388721093bc1be3af40974530d7c9a9ae5f43e
show more ...
|
| 8078b5c5 | 30-Mar-2021 |
André Przywara <andre.przywara@arm.com> |
Merge changes from topic "allwinner_h616" into integration
* changes:
allwinner: H616: Add reserved-memory node to DT
allwinner: Add Allwinner H616 SoC support
allwinner: Add H616 SoC ID
all
Merge changes from topic "allwinner_h616" into integration
* changes:
allwinner: H616: Add reserved-memory node to DT
allwinner: Add Allwinner H616 SoC support
allwinner: Add H616 SoC ID
allwinner: Express memmap more dynamically
allwinner: Move sunxi_cpu_power_off_self() into platforms
allwinner: Move SEPARATE_NOBITS_REGION to platforms
doc: allwinner: Reorder sections, document memory mapping
show more ...
|
| 26123ca3 | 28-Nov-2020 |
Andre Przywara <andre.przywara@arm.com> |
allwinner: Add Allwinner H616 SoC support
The new Allwinner H616 SoC lacks the management controller and the secure
SRAM A2, so we need to tweak the memory map quite substantially:
We run BL31 in DR
allwinner: Add Allwinner H616 SoC support
The new Allwinner H616 SoC lacks the management controller and the secure
SRAM A2, so we need to tweak the memory map quite substantially:
We run BL31 in DRAM. Since the DRAM starts at 1GB, we cannot use our
compressed virtual address space (max 256MB) anymore, so we revert to
the full 32bit VA space and use a flat mapping throughout all of it.
The missing controller also means we need to always use the native PSCI
ops, using the CPUIDLE hardware, as SCPI and suspend depend on the ARISC.
Change-Id: I77169b452cb7f5dc2ef734f3fc6e5d931749141d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
show more ...
|
| fe90f9ae | 11-Dec-2020 |
Andre Przywara <andre.przywara@arm.com> |
doc: allwinner: Reorder sections, document memory mapping
Update the Allwinner platform documentation.
Reorder the section, to have the build instructions first, followed by
hints about the installa
doc: allwinner: Reorder sections, document memory mapping
Update the Allwinner platform documentation.
Reorder the section, to have the build instructions first, followed by
hints about the installation.
Add some ASCII art about the layout of our virtual memory map, which
uses a non-trivial condensed virtual address space.
Change-Id: Iaaa79b4366012394e15e4c1b26c212b5efb6ed6a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
show more ...
|
| ad329e50 | 21-Dec-2020 |
Ying-Chun Liu (PaulLiu) <paulliu@debian.org> |
plat: imx8mm: Add in BL2 with FIP
Adds bl2 with FIP to the build required for mbed Linux booting where
we do:
BootROM -> SPL -> BL2 -> OPTEE -> u-boot
If NEED_BL2 is specified then BL2 will be bui
plat: imx8mm: Add in BL2 with FIP
Adds bl2 with FIP to the build required for mbed Linux booting where
we do:
BootROM -> SPL -> BL2 -> OPTEE -> u-boot
If NEED_BL2 is specified then BL2 will be built and BL31 will have
its address range modified upwards to accommodate. BL31 must be
loaded from a FIP in this case.
If NEED_BL2 is not specified then the current BL31 boot flow is
unaffected and u-boot SPL will load and execute BL31 directly.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I655343b3b689b1fc57cfbedda4d3dc2fbd549a96
show more ...
|
| 13d25345 | 08-Mar-2021 |
Manish Pandey <manish.pandey2@arm.com> |
doc: update maintainer list for Arm platforms
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I24a1697d0e0ec9289d272f0e96a252894faf12ef |
| 32d440c7 | 09-Mar-2021 |
Manish Pandey <manish.pandey2@arm.com> |
doc: re-format maintainer.rst file rendering
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I9fafeb966eeec35527647282b953d88f6aa383be |
| 893716d7 | 03-Mar-2021 |
Mark Dykes <mardyk01@review.trustedfirmware.org> |
Merge "docs: Add GIC600AE FVP model version information" into integration |
| 051906bb | 01-Mar-2021 |
Manish V Badarkhe <Manish.Badarkhe@arm.com> |
docs: Add GIC600AE FVP model version information
Added GIC600AE FVP model version information.
Change-Id: I15d25fbdb8e09900976d5993032ec049f8db79f2
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe
docs: Add GIC600AE FVP model version information
Added GIC600AE FVP model version information.
Change-Id: I15d25fbdb8e09900976d5993032ec049f8db79f2
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
show more ...
|
| 873d4241 | 02-Oct-2020 |
johpow01 <john.powell@arm.com> |
Enable v8.6 AMU enhancements (FEAT_AMUv1p1)
ARMv8.6 adds virtual offset registers to support virtualization of the
event counters in EL1 and EL0. This patch enables support for this
feature in EL3
Enable v8.6 AMU enhancements (FEAT_AMUv1p1)
ARMv8.6 adds virtual offset registers to support virtualization of the
event counters in EL1 and EL0. This patch enables support for this
feature in EL3 firmware.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7ee1f3d9f554930bf5ef6f3d492e932e6d95b217
show more ...
|
| f1127926 | 15-Feb-2021 |
Yann Gautier <yann.gautier@foss.st.com> |
docs: stm32mp1: correct formatting issues
Add blank lines before lists and code example.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I901646e0be74227af983079d0cbe05c6a217fab6 |