| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/powerpc/fsl/ |
| H A D | l2cache.txt | 1 Freescale L2 Cache Controller 3 L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms. 4 The cache bindings explained below are Devicetree Specification compliant 8 - compatible : Should include one of the following: 9 "fsl,8540-l2-cache-controller" 10 "fsl,8541-l2-cache-controller" 11 "fsl,8544-l2-cache-controller" 12 "fsl,8548-l2-cache-controller" 13 "fsl,8555-l2-cache-controller" 14 "fsl,8568-l2-cache-controller" [all …]
|
| H A D | pamu.txt | 5 The PAMU is an I/O MMU that provides device-to-memory access control and 10 - compatible : <string> 11 First entry is a version-specific string, such as 12 "fsl,pamu-v1.0". The second is "fsl,pamu". 13 - ranges : <prop-encoded-array> 15 I/O space utilized by the controller. The size should 18 PAMU v1.0, on an SOC that has five PAMU devices, the size 19 is 0x5000. 20 - interrupts : <prop-encoded-array> 25 - #address-cells: <u32> [all …]
|
| /OK3568_Linux_fs/kernel/arch/powerpc/sysdev/ |
| H A D | fsl_85xx_l2ctlr.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * Copyright 2009-2010, 2012 Freescale Semiconductor, Inc. 5 * QorIQ (P1/P2) L2 controller init for Cache-SRAM instantiation 26 if (!sram_size || (kstrtouint(sram_size, 0, &size) < 0)) in get_cache_sram_params() 27 return -EINVAL; in get_cache_sram_params() 29 if (!sram_offset || (kstrtoull(sram_offset, 0, &addr) < 0)) in get_cache_sram_params() 30 return -EINVAL; in get_cache_sram_params() 32 sram_params->sram_offset = addr; in get_cache_sram_params() 33 sram_params->sram_size = size; in get_cache_sram_params() 35 return 0; in get_cache_sram_params() [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/arm/socionext/ |
| H A D | socionext,uniphier-system-cache.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/arm/socionext/socionext,uniphier-system-cache.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: UniPhier outer cache controller 10 UniPhier ARM 32-bit SoCs are integrated with a full-custom outer cache 11 controller system. All of them have a level 2 cache controller, and some 12 have a level 3 cache controller as well. 15 - Masahiro Yamada <yamada.masahiro@socionext.com> 19 const: socionext,uniphier-system-cache [all …]
|
| /OK3568_Linux_fs/kernel/arch/riscv/boot/dts/sifive/ |
| H A D | fu540-c000.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 2 /* Copyright (c) 2018-2019 SiFive, Inc */ 4 /dts-v1/; 6 #include <dt-bindings/clock/sifive-fu540-prci.h> 9 #address-cells = <2>; 10 #size-cells = <2>; 11 compatible = "sifive,fu540-c000", "sifive,fu540"; 23 #address-cells = <1>; 24 #size-cells = <0>; 25 cpu0: cpu@0 { [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/hisilicon/ |
| H A D | hip05.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 compatible = "hisilicon,hip05-d02"; 12 interrupt-parent = <&gic>; 13 #address-cells = <2>; 14 #size-cells = <2>; 17 compatible = "arm,psci-0.2"; 22 #address-cells = <1>; 23 #size-cells = <0>; 25 cpu-map { [all …]
|
| H A D | hip07.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 compatible = "hisilicon,hip07-d05"; 12 interrupt-parent = <&gic>; 13 #address-cells = <2>; 14 #size-cells = <2>; 17 compatible = "arm,psci-0.2"; 22 #address-cells = <1>; 23 #size-cells = <0>; 25 cpu-map { [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/arm/ |
| H A D | l2c2x0.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: ARM L2 Cache Controller 10 - Rob Herring <robh@kernel.org> 14 PL220/PL310 and variants) based level 2 cache controller. All these various 15 implementations of the L2 cache controller have compatible programming 16 models (Note 1). Some of the properties that are just prefixed "cache-*" are 22 cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These 28 - $ref: /schemas/cache-controller.yaml# [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/freescale/ |
| H A D | fsl-lx2160a.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 3 // Device Tree Include file for Layerscape-LX2160A family SoC. 5 // Copyright 2018-2020 NXP 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 9 #include <dt-bindings/thermal/thermal.h> 11 /memreserve/ 0x80000000 0x00010000; 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; [all …]
|
| /OK3568_Linux_fs/kernel/drivers/edac/ |
| H A D | mpc85xx_edac.c | 2 * Freescale MPC85xx Memory Controller kernel module 8 * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under 51 struct mpc85xx_pci_pdata *pdata = pci->pvt_info; in mpc85xx_pci_check() 54 err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR); in mpc85xx_pci_check() 58 out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect); in mpc85xx_pci_check() 66 in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ATTRIB)); in mpc85xx_pci_check() 68 in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR)); in mpc85xx_pci_check() 70 in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EXT_ADDR)); in mpc85xx_pci_check() 72 in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DL)); in mpc85xx_pci_check() 74 in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DH)); in mpc85xx_pci_check() [all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/dts/ |
| H A D | uniphier-pro5.dtsi | 4 * Copyright (C) 2015-2016 Socionext Inc. 7 * SPDX-License-Identifier: (GPL-2.0+ OR MIT) 11 compatible = "socionext,uniphier-pro5"; 12 #address-cells = <1>; 13 #size-cells = <1>; 16 #address-cells = <1>; 17 #size-cells = <0>; 19 cpu@0 { 21 compatible = "arm,cortex-a9"; 22 reg = <0>; [all …]
|
| H A D | uniphier-pxs2.dtsi | 4 * Copyright (C) 2015-2016 Socionext Inc. 7 * SPDX-License-Identifier: (GPL-2.0+ OR MIT) 11 compatible = "socionext,uniphier-pxs2"; 12 #address-cells = <1>; 13 #size-cells = <1>; 16 #address-cells = <1>; 17 #size-cells = <0>; 19 cpu@0 { 21 compatible = "arm,cortex-a9"; 22 reg = <0>; [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/nds32/ |
| H A D | atl2c.txt | 1 * Andestech L2 cache Controller 3 The level-2 cache controller plays an important role in reducing memory latency 5 Level-2 cache controller in general enhances overall system performance 10 representation of an Andestech L2 cache controller. 13 - compatible: 17 - reg : Physical base address and size of cache controller's memory mapped 18 - cache-unified : Specifies the cache is a unified cache. 19 - cache-level : Should be set to 2 for a level 2 cache. 23 cache-controller@e0500000 { 25 reg = <0xe0500000 0x1000>; [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/riscv/ |
| H A D | cpus.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR MIT) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: RISC-V bindings for 'cpus' DT nodes 10 - Paul Walmsley <paul.walmsley@sifive.com> 11 - Palmer Dabbelt <palmer@sifive.com> 14 This document uses some terminology common to the RISC-V community 18 mandated by the RISC-V ISA: a PC and some registers. This 28 - items: 29 - enum: [all …]
|
| H A D | sifive-l2-cache.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/riscv/sifive-l2-cache.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 8 title: SiFive L2 Cache Controller 11 - Sagar Kadam <sagar.kadam@sifive.com> 12 - Yash Shah <yash.shah@sifive.com> 13 - Paul Walmsley <paul.walmsley@sifive.com> 16 The SiFive Level 2 Cache Controller is used to provide access to fast copies 17 of memory for masters in a Core Complex. The Level 2 Cache Controller also [all …]
|
| /OK3568_Linux_fs/kernel/arch/powerpc/boot/dts/ |
| H A D | iss4xx-mpic.dts | 15 /dts-v1/; 17 /memreserve/ 0x01f00000 0x00100000; 20 #address-cells = <2>; 21 #size-cells = <1>; 22 model = "ibm,iss-4xx"; 23 compatible = "ibm,iss-4xx"; 24 dcr-parent = <&{/cpus/cpu@0}>; 31 #address-cells = <1>; 32 #size-cells = <0>; 34 cpu@0 { [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/qcom/ |
| H A D | sdm660.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 7 #include <dt-bindings/interrupt-controller/arm-gic.h> 8 #include <dt-bindings/clock/qcom,gcc-sdm660.h> 11 interrupt-parent = <&intc>; 13 #address-cells = <2>; 14 #size-cells = <2>; 20 compatible = "fixed-clock"; 21 #clock-cells = <0>; 22 clock-frequency = <19200000>; 23 clock-output-names = "xo_board"; [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm/boot/dts/ |
| H A D | bcm63138.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/interrupt-controller/irq.h> 10 #address-cells = <1>; 11 #size-cells = <1>; 14 interrupt-parent = <&gic>; 22 #address-cells = <1>; 23 #size-cells = <0>; 25 cpu@0 { 27 compatible = "arm,cortex-a9"; [all …]
|
| H A D | arm-realview-eb-mp.dtsi | 23 #include <dt-bindings/interrupt-controller/irq.h> 24 #include <dt-bindings/gpio/gpio.h> 25 #include "arm-realview-eb.dtsi" 30 * and Cortex-A9 MPCore. 34 #address-cells = <1>; 35 #size-cells = <1>; 36 compatible = "arm,realview-eb-soc", "simple-bus"; 40 /* Primary interrupt controller in the test chip */ 41 intc: interrupt-controller@1f000100 { 42 compatible = "arm,eb11mp-gic"; [all …]
|
| /OK3568_Linux_fs/kernel/arch/riscv/boot/dts/kendryte/ |
| H A D | k210.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 6 #include <dt-bindings/clock/k210-clk.h> 10 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits 13 #address-cells = <1>; 14 #size-cells = <1>; 23 * Since this is a non-ratified draft specification, the kernel does not 28 #address-cells = <1>; 29 #size-cells = <0>; 30 timebase-frequency = <7800000>; 31 cpu0: cpu@0 { [all …]
|
| /OK3568_Linux_fs/u-boot/drivers/usb/gadget/ |
| H A D | ci_udc.c | 5 * SPDX-License-Identifier: GPL-2.0+ 8 * Murray.Jensen@cmst.csiro.au, 27-Jan-01. 30 * cache over separate QH entries. We use 128b because one QH entry is 39 * QTD's address into HW. Cache flushing requires ARCH_DMA_MINALIGN, 40 * and the USB HW requires 32-byte alignment. Align to both: 53 #define EP_MAX_LENGTH_TRANSFER 0x4000 56 #define DBG(x...) do {} while (0) 110 [0] = { /* EP 0 */ 117 .name = "ep1in-bulk", 122 .name = "ep2out-bulk", [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/apm/ |
| H A D | apm-shadowcat.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC 9 compatible = "apm,xgene-shadowcat"; 10 interrupt-parent = <&gic>; 11 #address-cells = <2>; 12 #size-cells = <2>; 15 #address-cells = <2>; 16 #size-cells = <0>; 18 cpu@0 { 21 reg = <0x0 0x000>; [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/synaptics/ |
| H A D | berlin4ct.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 12 interrupt-parent = <&gic>; 13 #address-cells = <2>; 14 #size-cells = <2>; 21 compatible = "arm,psci-1.0", "arm,psci-0.2"; 26 #address-cells = <1>; 27 #size-cells = <0>; 29 cpu0: cpu@0 { 30 compatible = "arm,cortex-a53"; [all …]
|
| /OK3568_Linux_fs/u-boot/board/freescale/bsc9131rdb/ |
| H A D | README | 2 -------- 3 - BSC9131 is integrated device that targets Femto base station market. 5 technologies with MAPLE-B2F baseband acceleration processing elements. 6 - It's MAPLE disabled personality is called 9231. 9 . Power Architecture subsystem including a e500 processor with 256-Kbyte shared 10 L2 cache 11 . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache 13 Processing (MAPLE-B2F) 14 . A multi-standard baseband algorithm accelerator for Channel Decoding/Encoding, 20 . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit with [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm/mm/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0 17 A 32-bit RISC microprocessor based on the ARM7 processor core 18 which has no memory control unit and cache. 36 A 32-bit RISC processor with 8kByte Cache, Write Buffer and 53 A 32-bit RISC processor with 8KB cache or 4KB variants, 69 A 32-bit RISC microprocessor based on the ARM9 processor core 70 which has no memory control unit and cache. 147 instruction sequences for cache and TLB operations. Curiously, 166 Branch Target Buffer, Unified TLB and cache line size 16. 182 ARM940T is a member of the ARM9TDMI family of general- [all …]
|