feat(st): protect UART during platform init

Protect the UART instance used for serial boot
with UART used for console.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ieee1557b

feat(st): protect UART during platform init

Protect the UART instance used for serial boot
with UART used for console.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ieee1557b34e7baa81594c3fbf0513191737027bf

show more ...

feat(stm32mp1): update console management for SP_min

Use stm32mp_uart_console_setup() in SP_min setup.
Adapt the function stm32mp_uart_console_setup() for BL32 (no reset, add
CONSOLE_FLAG_RUNTIME un

feat(stm32mp1): update console management for SP_min

Use stm32mp_uart_console_setup() in SP_min setup.
Adapt the function stm32mp_uart_console_setup() for BL32 (no reset, add
CONSOLE_FLAG_RUNTIME under DEBUG.

Change-Id: Ib2d35c8d285dafb680aa218872ad679cbf43d0ed
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

refactor(stm32mp1): improve console management in BL2

Use newly created function stm32mp_uart_console_setup().
And remove now useless code.

Change-Id: Ib8d0319d3f4f54309848bc225b58608cea73bad9
Sign

refactor(stm32mp1): improve console management in BL2

Use newly created function stm32mp_uart_console_setup().
And remove now useless code.

Change-Id: Ib8d0319d3f4f54309848bc225b58608cea73bad9
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

feat(stm32mp1): add stm32_get_boot_interface function

Add function stm32_get_boot_interface to get the current boot interface
from information saved in the TAMP register.

Change-Id: I23af43c68eeaeb

feat(stm32mp1): add stm32_get_boot_interface function

Add function stm32_get_boot_interface to get the current boot interface
from information saved in the TAMP register.

Change-Id: I23af43c68eeaebe4c45920a57d739117aea3fbb1
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

show more ...

refactor(stm32mp1): move stm32_save_boot_interface()

The function stm32_save_boot_interface()is moved to stm32mp1_private.c
file. The files stm32mp1_context.{c,h} are removed.
As return is always 0,

refactor(stm32mp1): move stm32_save_boot_interface()

The function stm32_save_boot_interface()is moved to stm32mp1_private.c
file. The files stm32mp1_context.{c,h} are removed.
As return is always 0, change the function to return void.
Call it earlier, to be able to use it when configuring console.

Change-Id: I8986e1257dc8e8708eab044a51ea1f2426b16597
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

show more ...

fix(stm32mp1): deconfigure UART RX pins

Those pins are configured by ROM code, for serial boot use cases.
Their configs are reset if the boot is done on UART, but not on USB.
This should then be don

fix(stm32mp1): deconfigure UART RX pins

Those pins are configured by ROM code, for serial boot use cases.
Their configs are reset if the boot is done on UART, but not on USB.
This should then be done in TF-A. This has to be done after clock
init, and before console is configured.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I29a9694e25fcf1665360dd71f73937f769c43b52

show more ...

feat(stm32_gpio): add a function to reset a pin

Add set_gpio_reset_cfg() to set a pin in its reset configuration:
analog, no-pull, speed low, and its secure configuration, thanks to
stm32_gpio_is_se

feat(stm32_gpio): add a function to reset a pin

Add set_gpio_reset_cfg() to set a pin in its reset configuration:
analog, no-pull, speed low, and its secure configuration, thanks to
stm32_gpio_is_secure_at_reset().

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7b73c3636859f97fcc57f81cf68b42efc727922e

show more ...

refactor(stm32mp1): sort compilation flags

Sort the compilation flags in platform.mk when checking and defining
them for C files.

Change-Id: I5a08399c89ede4c0bd8697045706122732205db5
Signed-off-by:

refactor(stm32mp1): sort compilation flags

Sort the compilation flags in platform.mk when checking and defining
them for C files.

Change-Id: I5a08399c89ede4c0bd8697045706122732205db5
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

feat(stm32mp1): add sign-compare warning

Add -Wsign-compare to TF_CFLAGS to check signedness comparison during
STM32MP1 platform compilation.

Change-Id: I4cada49622f44258d3e0da4560a566de9c7d54b3
Si

feat(stm32mp1): add sign-compare warning

Add -Wsign-compare to TF_CFLAGS to check signedness comparison during
STM32MP1 platform compilation.

Change-Id: I4cada49622f44258d3e0da4560a566de9c7d54b3
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

feat(stm32mp1): skip TOS_FW_CONFIG if not in FIP

Thanks to dyn_cfg_dtb_info_get_index(), we can check if TOS_FW_CONFIG
is inside the FIP partition. If not we can skip its treatment when
populating F

feat(stm32mp1): skip TOS_FW_CONFIG if not in FIP

Thanks to dyn_cfg_dtb_info_get_index(), we can check if TOS_FW_CONFIG
is inside the FIP partition. If not we can skip its treatment when
populating FIP images.

Change-Id: If5623eabd1ba484549d4a908d4a6f43325b36875
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

feat(plat/st): add STM32MP_UART_PROGRAMMER target

Handle boot from UART with STM32CubeProgammer based on mmap io
for STM32MP15.

Depends-On: Iba84e8dfd67b9f30416efb0f6778e48ba1f75dad
Signed-off-by:

feat(plat/st): add STM32MP_UART_PROGRAMMER target

Handle boot from UART with STM32CubeProgammer based on mmap io
for STM32MP15.

Depends-On: Iba84e8dfd67b9f30416efb0f6778e48ba1f75dad
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ibd719dd46a11da78633728675ef6639635b6cf67

show more ...

Merge changes from topic "st_usb" into integration

* changes:
fix(drivers/usb): add a optional ops get_other_speed_config_desc
fix(drivers/usb): remove unnecessary cast

refactor(stm32mp1): use fconf.mk

Update STM32MP1 platform.mk file to include fconf.mk.

Change-Id: Idc623a832b4cdf9486835fc612803015f4f1a5f5
Signed-off-by: Yann Gautier <yann.gautier@st.com>

fix(drivers/usb): add a optional ops get_other_speed_config_desc

Correctly handle USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION request
in USB driver and support a different result than
USB_DESC_TYPE_CONF

fix(drivers/usb): add a optional ops get_other_speed_config_desc

Correctly handle USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION request
in USB driver and support a different result than
USB_DESC_TYPE_CONFIGURATION with the new optional ops
get_other_speed_config_desc().

The support of this descriptor is optionnal and is only
required when high-speed capable device which can operate at its
other possible speed.

This patch allows to remove the pbuf update in usb_core_get_desc()
and solves an issue on USB re-enumeration on STM32MP15 platform
as the result of get_config_desc() is a const array.
This issue is not see on normal use-case, as the USB enumeration
is only done in ROM code and TF-A reuse the same USB descritors.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I8edcc1e45065ab4e45d48f4bc37b49120674fdb0

show more ...

feat(plat/st/stm32mp1): add STM32MP_USB_PROGRAMMER target

Add a support of USB as serial boot devices for STM32MP15x platform:
the FIP file is provide by STM32CubeProgrammer with the DFU protocol,
l

feat(plat/st/stm32mp1): add STM32MP_USB_PROGRAMMER target

Add a support of USB as serial boot devices for STM32MP15x platform:
the FIP file is provide by STM32CubeProgrammer with the DFU protocol,
loaded in DDR at DWL_BUFFER_BASE address and then the io memmap is used.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I272c17c458ff1e9d0780f8fa22330c8a35533d19

show more ...

feat(plat/st/stm32mp1): add USB DFU support for STM32MP1

Add the USB descriptor, the struct used for USB enumeration with
the function usb_dfu_plat_init().

The USB support is based on the usb lib a

feat(plat/st/stm32mp1): add USB DFU support for STM32MP1

Add the USB descriptor, the struct used for USB enumeration with
the function usb_dfu_plat_init().

The USB support is based on the usb lib and on the stm32mp1 usb driver.

The content of enumeration (the string descriptor) is identical to
ROM code to avoid the USB reset en re-enumeration needs.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I18b40649e8df83813a5a340b0eee44c9a3470e43

show more ...

build(fdt-wrappers): introduce FDT wrappers makefile

This has been introduced to simplify dependencies on the FDT wrappers.
We generally want to avoid pulling in components on a file-by-file
basis,

build(fdt-wrappers): introduce FDT wrappers makefile

This has been introduced to simplify dependencies on the FDT wrappers.
We generally want to avoid pulling in components on a file-by-file
basis, particularly as we are trying to draw conceptual boxes around
components in preparation for transitioning the build system to CMake,
where dependencies are modelled on libraries rather than files.

Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: Idb7ee05a9b54a8caa3e07f36e608867e20b6dcd5

show more ...

Merge "fix(plat/st): correct signedness comparison issue" into integration

fix(stm32mp1): add bl prefix for internal linker script

Due to patch [1], the bl prefix was removed from the build macros.
It should then add explicitly when compiling stm32mp1.ld.S.

[1] 434d0491c5

fix(stm32mp1): add bl prefix for internal linker script

Due to patch [1], the bl prefix was removed from the build macros.
It should then add explicitly when compiling stm32mp1.ld.S.

[1] 434d0491c5 ("refactor(makefile): remove BL prefixes in build macros")

Change-Id: I298dba2a7c958dd4ea6429c83ed4b1ee97e1735f
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

fix(plat/st): correct signedness comparison issue

Add casts where required to avoid compialtion error when enabling
-Wsign-compare in shared resources file.
The assert is also corrected to match the

fix(plat/st): correct signedness comparison issue

Add casts where required to avoid compialtion error when enabling
-Wsign-compare in shared resources file.
The assert is also corrected to match the correct range (change ||
to &&).

Change-Id: Ie4c9c0c935d39ff9a2165b909172aacb3e94ab4d
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

fix(plat/st): add UART reset in crash console init

Add the reset set/clear sequence at the beginning of the function
plat_crash_console_init(). If not done, there is a risk that the UART
is in a bad

fix(plat/st): add UART reset in crash console init

Add the reset set/clear sequence at the beginning of the function
plat_crash_console_init(). If not done, there is a risk that the UART
is in a bad state and will not be able to print correct characters.

Change-Id: Id31e28773d6c4f26f16d3569d1e3c5aa0e26e039
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

feat(plat/st): add a new DDR firewall management

Based on FCONF framework, define DDR firewall regions
from firmware config file instead of static defines.

Change-Id: I471e15410ca286d9079a86e3dc347

feat(plat/st): add a new DDR firewall management

Based on FCONF framework, define DDR firewall regions
from firmware config file instead of static defines.

Change-Id: I471e15410ca286d9079a86e3dc3474f66d37b5ab
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

show more ...

refactor(plat/st): use TZC400 bindings

This avoids duplicate define of TZC_REGION_NSEC_ALL_ACCESS_RDWR.
And remove the previous TZC400 definitions from stm32mp1_def.h.

Change-Id: I6c72c2a18731f69d8

refactor(plat/st): use TZC400 bindings

This avoids duplicate define of TZC_REGION_NSEC_ALL_ACCESS_RDWR.
And remove the previous TZC400 definitions from stm32mp1_def.h.

Change-Id: I6c72c2a18731f69d855fbce8ce822a21da9364fa
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

show more ...

feat(plat/st): manage io_policies with FCONF

Introduced IO policies management through the trusted
boot firmware config device tree for UUID references.

Change-Id: Ibeeabede51b0514ebba26dbbdae58736

feat(plat/st): manage io_policies with FCONF

Introduced IO policies management through the trusted
boot firmware config device tree for UUID references.

Change-Id: Ibeeabede51b0514ebba26dbbdae587363b2aa0a7
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

show more ...

feat(plat/st): use FCONF to configure platform

Add required code to support FCONF on STM32MP1 platform.
The new FW_CONFIG DT file will be inside the FIP, and loaded by BL2.
It will be used to config

feat(plat/st): use FCONF to configure platform

Add required code to support FCONF on STM32MP1 platform.
The new FW_CONFIG DT file will be inside the FIP, and loaded by BL2.
It will be used to configure the addresses where to load other binaries.
BL2 should be agnostic of which BL32 is in the FIP (OP-TEE or SP_min),
so optee_utils.c is always compiled, and some OP-TEE flags are removed.

Change-Id: Id957b49b0117864136250bfc416664f815043ada
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

show more ...