build(intel): enable access to on-chip ram in BL31 for N5X

This adds the ncore ccu access and enable access to the
on-chip ram for N5X device in BL31.

Signed-off-by: Boon Khai Ng <boon.khai.ng@inte

build(intel): enable access to on-chip ram in BL31 for N5X

This adds the ncore ccu access and enable access to the
on-chip ram for N5X device in BL31.

Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I713f6e93d33b6e91705547477ca32cfba5c8c13d

show more ...

fix(intel): make FPGA memory configurations platform specific

Define FPGA_CONFIG_SIZE and FPGA_CONFIG_ADDR in
platform-specific header. This is due to different
allocated sizes between platforms.

S

fix(intel): make FPGA memory configurations platform specific

Define FPGA_CONFIG_SIZE and FPGA_CONFIG_ADDR in
platform-specific header. This is due to different
allocated sizes between platforms.

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Iac4fbf4d4940cdf31834a9d4332f9292870dee76

show more ...

fix(intel): fix ECC Double Bit Error handling

SError and Abort are handled in Linux (EL1) instead of
EL3. This patch adds some functionality that complements the
use cases by Linux as follows:

- Pr

fix(intel): fix ECC Double Bit Error handling

SError and Abort are handled in Linux (EL1) instead of
EL3. This patch adds some functionality that complements the
use cases by Linux as follows:

- Provide SMC for ECC DBE notification to EL3
- Determine type of reset needed and service the request in
place of Linux

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I43d02c77f28004a31770be53599a5a42de412211

show more ...

build(intel): define a macro for SIMICS build

SIMICS builds have different UART configurations compared
to hardware build. Hence, this patch defines a macro to
differentiate between both.

Signed-of

build(intel): define a macro for SIMICS build

SIMICS builds have different UART configurations compared
to hardware build. Hence, this patch defines a macro to
differentiate between both.

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Iadecd5445e06611486ac3c6a214a6d0dc8ccd27b

show more ...

build(intel): add N5X as a new Intel platform

This commit adds a new Intel platform called N5X.
This preliminary patch only have Bl31 support.

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muh

build(intel): add N5X as a new Intel platform

This commit adds a new Intel platform called N5X.
This preliminary patch only have Bl31 support.

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ib31f9c4a5a0dabdce81c1d5b0d4776188add7195

show more ...

build(intel): initial commit for crypto driver

This patch adds driver for Intel FPGA's Crypto Services.
These services are provided by Intel platform
Secure Device Manager(SDM) and are made accessib

build(intel): initial commit for crypto driver

This patch adds driver for Intel FPGA's Crypto Services.
These services are provided by Intel platform
Secure Device Manager(SDM) and are made accessible by
processor components (ie ATF).
Below is the list of enabled features:
- Send SDM certificates
- Efuse provision data dump
- Encryption/decryption service
- Hardware IP random number generator

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: If7604cd1cacf27a38a9a29ec6b85b07385e1ea26

show more ...

Merge "fix(errata): workaround for Cortex-A710 2282622" into integration

fix(errata): workaround for Cortex-A710 2282622

Cortex-A710 erratum 2282622 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r2p0, and is fixed in r2p1. The workaround is to set
CPUACTL

fix(errata): workaround for Cortex-A710 2282622

Cortex-A710 erratum 2282622 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r2p0, and is fixed in r2p1. The workaround is to set
CPUACTLR2_EL1[0] to 1, which will force PLDW/PFRM ST to behave like
PLD/PRFM LD and not cause invalidations to other PE caches.

SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ic48409822536e9eacc003300036a1f0489593020

show more ...

Merge "docs(security): security advisory for CVE-2022-23960" into integration

docs(security): security advisory for CVE-2022-23960

Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I17b0847ff71e4a291bf7ba41fd71fe08c400b5e8

Merge changes I18d47384,Icc3c7424,I73f20d82,I07325644,Iff10ad26, ... into integration

* changes:
fix(zynqmp): query node status to power up APU
feat(zynqmp): pm_api_clock_get_num_clocks cleanup

Merge changes I18d47384,Icc3c7424,I73f20d82,I07325644,Iff10ad26, ... into integration

* changes:
fix(zynqmp): query node status to power up APU
feat(zynqmp): pm_api_clock_get_num_clocks cleanup
feat(zynqmp): add feature check support
fix(zynqmp): use common interface for eemi apis
feat(zynqmp): add support to get info of xilfpga
feat(zynqmp): pass ioctl calls to firmware

show more ...

Merge "fix(st-pmic): add static const to pmic_ops" into integration

fix(st-pmic): add static const to pmic_ops

The static was found by sparse tool:
drivers/st/pmic/stm32mp_pmic.c:456:18: warning: symbol 'pmic_ops'
was not declared. Should it be static?
The const wa

fix(st-pmic): add static const to pmic_ops

The static was found by sparse tool:
drivers/st/pmic/stm32mp_pmic.c:456:18: warning: symbol 'pmic_ops'
was not declared. Should it be static?
The const was also missing.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ibb5cfaf67ac980bf0af27712a95dbef05b617c25

show more ...

Merge "refactor(mbedtls): allow platform to specify their config file" into integration

Merge "docs(maintainers): add maintained files for MediaTek SoCs" into integration

Merge "fix(versal): fix the incorrect log message" into integration

fix(versal): fix the incorrect log message

When the atf-handoff-params are updated we are returning
FSBL_HANDOFF_SUCCESS, but the return condition is wrongly
updated and added a error log which is i

fix(versal): fix the incorrect log message

When the atf-handoff-params are updated we are returning
FSBL_HANDOFF_SUCCESS, but the return condition is wrongly
updated and added a error log which is incorrect.
Fixing the incorrect log message.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I44ebbb861831b86afcb87f09ddb2e23614393c28

show more ...

Merge "fix(st-clock): initialize pllcfg table" into integration

Merge changes from topic "st-uart-baudrate" into integration

* changes:
refactor(st): configure UART baudrate
docs(stm32mp1): document some compilation flags
feat(st-uart): manage oversampling

Merge changes from topic "st-uart-baudrate" into integration

* changes:
refactor(st): configure UART baudrate
docs(stm32mp1): document some compilation flags
feat(st-uart): manage oversampling by 8
fix(st-uart): correctly fill BRR register

show more ...

refactor(st): configure UART baudrate

Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 11520

refactor(st): configure UART baudrate

Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 115200.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I000df70c10b2b4dac1449556596f9820c36cf243

show more ...

docs(stm32mp1): document some compilation flags

Add missing serial boot devices flags.
Add optional compilation flags, and their defauld values.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Ch

docs(stm32mp1): document some compilation flags

Add missing serial boot devices flags.
Add optional compilation flags, and their defauld values.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I507f7110bcd7b9af136a6fc6b8af342b084c8dbc

show more ...

feat(st-uart): manage oversampling by 8

UART oversampling by 8 allows higher baud rates for UART. This is
required when (UART freq / baudrate) <= 16. In this case the OVER8 bit
needs to be enabled i

feat(st-uart): manage oversampling by 8

UART oversampling by 8 allows higher baud rates for UART. This is
required when (UART freq / baudrate) <= 16. In this case the OVER8 bit
needs to be enabled in CR1 register. And the BRR register management is
different:
USARTDIV = (2 * UART freq / baudrate) (with div round nearest)
BRR[15:4] = USARTDIV[15:4]
BRR[3] = 0
BRR[2:0] = USARTDIV[3:0] >> 1

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ia3fbeeb73a36a4dc485c7ba428c531e65b6f6c09

show more ...

fix(st-uart): correctly fill BRR register

To get the nearest divisor for BRR register, we use:
Divisor = (Uart clock + (baudrate / 2)) / baudrate
But lsl was wrongly used instead of lsr to have the

fix(st-uart): correctly fill BRR register

To get the nearest divisor for BRR register, we use:
Divisor = (Uart clock + (baudrate / 2)) / baudrate
But lsl was wrongly used instead of lsr to have the division by 2.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Iedcc3ccdb4cf8268012e82a66df2a9ec48fc1d79

show more ...

fix(st-clock): initialize pllcfg table

The issue was found by Coverity:
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL4]" when calling
"stm32mp1_check_pll_conf".
CID 376582:

fix(st-clock): initialize pllcfg table

The issue was found by Coverity:
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL4]" when calling
"stm32mp1_check_pll_conf".
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL3]" when calling
"stm32mp1_check_pll_conf".

Check PLL configs are valid before using pllcfg.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I49de849eaf451d0c165a8eb8555112a0a4140bbc

show more ...

Merge "feat(ff-a): forward FFA_VERSION from SPMD to SPMC" into integration