refactor(juno): move plat_def_uuid_config to fiptool

The same was done for other platforms: stm32mp1, tc before in
commit 034a2e3ef8a9e8e58f7cb7fab6db4ee60b2f9c29 ('refactor(fiptool):
move plat_fipt

refactor(juno): move plat_def_uuid_config to fiptool

The same was done for other platforms: stm32mp1, tc before in
commit 034a2e3ef8a9e8e58f7cb7fab6db4ee60b2f9c29 ('refactor(fiptool):
move plat_fiptool.mk to tools')

Additionally this will make ignore generated files:

Untracked files:
plat/arm/board/juno/fip/plat_def_uuid_config.d
plat/arm/board/juno/fip/plat_def_uuid_config.o

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Change-Id: Ia5f1082fcd6d9dfc0be012759493e61ddb869956

show more ...

chore(auth)!: remove CryptoCell-712/713 support

CryptoCell-712 and CryptoCell-713 drivers have been deprecated since
TF-A v2.9 and their removal was announced for TF-A v2.10 release.
See [1].

As th

chore(auth)!: remove CryptoCell-712/713 support

CryptoCell-712 and CryptoCell-713 drivers have been deprecated since
TF-A v2.9 and their removal was announced for TF-A v2.10 release.
See [1].

As the release is approaching, this patch deletes these drivers' code as
well as all references to them in the documentation and Arm platforms
code (Nuvoton platform is taken care in a subsequent patch). Associated
build options (ARM_CRYPTOCELL_INTEG and PLAT_CRYPTOCELL_BASE) have also
been removed and thus will have no effect if defined.

This is a breaking change for downstream platforms which use these
drivers.

[1] https://trustedfirmware-a.readthedocs.io/en/v2.9/about/release-information.html#removal-of-deprecated-drivers
Note that TF-A v3.0 release later got renumbered into v2.10.

Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: Idabbc9115f6732ac1a0e52b273d3380677a39813

show more ...

build(juno): added error check for BL32 dependency

Macro PLAT_ARM_MAX_BL32_SIZE definition is dependent on
JUNO_AARCH32_EL3_RUNTIME=1. When this value is not set and building
for AArch32, the build

build(juno): added error check for BL32 dependency

Macro PLAT_ARM_MAX_BL32_SIZE definition is dependent on
JUNO_AARCH32_EL3_RUNTIME=1. When this value is not set and building
for AArch32, the build fails as it cannot find the definition of the
first macro. With this patch, the problem is addressed by producing
an error when the dependency is not set properly.

Change-Id: Ibe4e976bf79892fd26f3b266bd546218f5616825
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>

show more ...

refactor(ethos-n): move build flags to ethosn_npu.mk

The build flags to enable the Arm(R) Ethos(TM)-N NPU driver are in arm
platform specific make files i.e. plat/arm/common/arm_common.mk. These
fla

refactor(ethos-n): move build flags to ethosn_npu.mk

The build flags to enable the Arm(R) Ethos(TM)-N NPU driver are in arm
platform specific make files i.e. plat/arm/common/arm_common.mk. These
flags are renamed and moved to ethosn_npu.mk. Other source and make
files are changed to reflect the changes in these flags.

Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com>
Change-Id: I6fd20225343c574cb5ac1f0f32ff2fc28ef37ea6

show more ...

feat(juno): add mbedtls_asn1_get_len symbol in ROMlib

mbedtls_asn1_get_len() will be needed by the X.509 parser in an
upcoming patch.

Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Ch

feat(juno): add mbedtls_asn1_get_len symbol in ROMlib

mbedtls_asn1_get_len() will be needed by the X.509 parser in an
upcoming patch.

Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: I5609da000bbfc8a1503c298550ae3b0ba881fc96

show more ...

fix(fiptool): move juno plat_fiptool.mk

plat_fiptool.mk files now need to be in tools/fiptool/plat_fiptool/, so
this file has been moved to the new location so that it is picked up
correctly by the

fix(fiptool): move juno plat_fiptool.mk

plat_fiptool.mk files now need to be in tools/fiptool/plat_fiptool/, so
this file has been moved to the new location so that it is picked up
correctly by the build system.

Change-Id: Id3596b08bc856362e300f3dfefcaab5d75b4c400
Signed-off-by: Rob Hughes <robert.hughes@arm.com>

show more ...

feat(ethos-n): add separate RO and RW NSAIDs

To be able to further restrict the memory access for the Arm(R)
Ethos(TM)-N NPU, separate read-only and read/write NSAIDs for the
non-protected and prote

feat(ethos-n): add separate RO and RW NSAIDs

To be able to further restrict the memory access for the Arm(R)
Ethos(TM)-N NPU, separate read-only and read/write NSAIDs for the
non-protected and protected memory have been added to the Juno
platform's TZMP1 TZC configuration for the NPU.

The platform definition has been updated accordingly and the NPU driver
will now only give read/write access to the streams that require it.

Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I5a173500fc1943a5cd406a3b379e1f1f554eeda6

show more ...

feat(ethos-n): add NPU firmware validation

When the Arm(R) Ethos(TM)-N NPU driver is built with TZMP1 support, it
will now validate the NPU firmware binary that BL2 is expected to load
into the prot

feat(ethos-n): add NPU firmware validation

When the Arm(R) Ethos(TM)-N NPU driver is built with TZMP1 support, it
will now validate the NPU firmware binary that BL2 is expected to load
into the protected memory location specified by
ARM_ETHOSN_NPU_IMAGE_BASE.

Juno has been updated with a new BL31 memory mapping to allow the SiP
service to read the protected memory that contains the NPU firmware
binary.

Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I633256ab7dd4f8f5a6f864c8c98a66bf9dfc37f3

show more ...

feat(ethos-n)!: load NPU firmware at BL2

BL2 on Juno now loads the Arm(R) Ethos(TM)-N NPU firmware into a fixed
address, using the existing image loading framework.

Includes support for TRUSTED_BOA

feat(ethos-n)!: load NPU firmware at BL2

BL2 on Juno now loads the Arm(R) Ethos(TM)-N NPU firmware into a fixed
address, using the existing image loading framework.

Includes support for TRUSTED_BOARD_BOOT, if enabled, using the firmware
content and key certificates from the FIP.

Supports the ARM_IO_IN_DTB option so can specify the firmware location
from the dtb rather than it being hardcoded to the FIP

Update makefile to automatically embed the appropriate images into the
FIP.

BREAKING CHANGE: Building the FIP when TZMP1 support is enabled in the
NPU driver now requires a parameter to specify the NPU firmware file.

Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I8cd64fb20d58f8bd539facb085606213d6cead06

show more ...

feat(juno): support ARM_IO_IN_DTB option for Juno

Add UUIDs for loadable FIP images to Juno's tb_fw_config device tree, so
that it can be built with the ARM_IO_IN_DTB option. Increase the
max-size o

feat(juno): support ARM_IO_IN_DTB option for Juno

Add UUIDs for loadable FIP images to Juno's tb_fw_config device tree, so
that it can be built with the ARM_IO_IN_DTB option. Increase the
max-size of the tb_fw-config image accordingly, as the new entries
enlarge that image(new size is 2,116 bytes, rounded up to 2,560 =
0xA00)

Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I557bca7dd32c3be084bbba11d84dfa2818cb6789

show more ...

feat(ethos-n): add support for NPU to cert_create

Add Juno specific Makefile to the certificate tool build. That
Makefile is included by the certificate tool Makefile to add
information about the au

feat(ethos-n): add support for NPU to cert_create

Add Juno specific Makefile to the certificate tool build. That
Makefile is included by the certificate tool Makefile to add
information about the authentication data for the
Arm(R) Ethos(TM)-N NPU's firmware binary.

Signed-off-by: Mohamed Elzahhar <Mohamed.Elzahhar@arm.com>
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Ie4b6a1c29d73b3ed5041b57f2cd88033be18a63a

show more ...

feat(ethos-n): add NPU support in fiptool

Add platform specific Makefile to add UUIDs and command options
for the Arm(R) Ethos(TM)-N NPU firmware binary and certificate
data to the FIP so that the T

feat(ethos-n): add NPU support in fiptool

Add platform specific Makefile to add UUIDs and command options
for the Arm(R) Ethos(TM)-N NPU firmware binary and certificate
data to the FIP so that the TF-A's BL2 can later be used to load
the Arm(R) Ethos(TM)-N NPU firmware binary into memory and verify
its integrity.

Add separate driver specific include header file for the
Arm(R) Ethos(TM)-N NPU images containing UUIDs and command options
to make it easy to port the FIP support to other platforms.

Signed-off-by: Daniele Castro <daniele.castro@arm.com>
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I8cd64fb20d58f8bd539facb085606213d6cead05

show more ...

feat(ethos-n): add support to set up NSAID

For the TZC to allow the Arm(R) Ethos(TM)-N NPU to access the buffers
allocated in a protected memory region, it must include the correct
NSAID for that re

feat(ethos-n): add support to set up NSAID

For the TZC to allow the Arm(R) Ethos(TM)-N NPU to access the buffers
allocated in a protected memory region, it must include the correct
NSAID for that region in its transactions to the memory. This change
updates the SiP service to configure the NSAIDs specified by a platform
define. When doing a protected access the SiP service now configures the
NSAIDs specified by the platform define. For unprotected access the
NSAID is set to zero.

Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com>
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I3360ef33705162aba5c67670386922420869e331

show more ...

feat(ethos-n): add protected NPU TZMP1 regions

TZMP1 protected memory regions have been added in the Juno platform to
store sensitive data for the Arm(R) Ethos(TM)-N NPU
This is enabled when buildin

feat(ethos-n): add protected NPU TZMP1 regions

TZMP1 protected memory regions have been added in the Juno platform to
store sensitive data for the Arm(R) Ethos(TM)-N NPU
This is enabled when building TF-A with ARM_ETHOSN_NPU_TZMP1.

The NPU uses two protected memory regions:
1) Firmware region to protect the NPU's firmware from being modified
from the non-secure world
2) Data region for sensitive data used by the NPU

Respective memory region can only be accessed with their unique NSAID.

Signed-off-by: Bjorn Engstrom <bjoern.engstroem@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Change-Id: I65200047f10364ca18681ce348a6edb2ffb9b095

show more ...

build(ethos-n): add TZMP1 build flag

For the Arm(R) Ethos(TM)-N NPU Driver to support running inference with
protected memory the TZC must be configured with appropriate regions.

This is controlled

build(ethos-n): add TZMP1 build flag

For the Arm(R) Ethos(TM)-N NPU Driver to support running inference with
protected memory the TZC must be configured with appropriate regions.

This is controlled in build time by the now added build flag.

The new build flag is only supported with the Arm Juno platform and the
TZC is configured with default memory regions as if TZMP1 wasn't
enabled to facilitate adding the new memory regions later.

Signed-off-by: Bjorn Engstrom <bjoern.engstroem@arm.com>
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I9dc49ac5d091cfbc8c20d7c3ab394a2836438b0f

show more ...

refactor(build): distinguish BL2 as TF-A entry point and BL2 running at EL3

BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is runnin

refactor(build): distinguish BL2 as TF-A entry point and BL2 running at EL3

BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is running at EL3 exception level
These two scenarios are not exactly same even though first implicitly
means second to be true. To distinguish between these two use cases we
introduce new macros.
BL2_AT_EL3 is renamed to RESET_TO_BL2 to better convey both 1. and 2.
Additional macro BL2_RUNS_AT_EL3 is added to cover all scenarious where
BL2 runs at EL3 (including four world systems).

BREAKING CHANGE: BL2_AT_EL3 renamed to RESET_TO_BL2 across the
repository.

Change-Id: I477e1d0f843b44b799c216670e028fcb3509fb72
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>

show more ...

fix(scmi): change function prototype to fix gcc error

Change function prototype of plat_css_get_scmi_info() to fix the GCC
sign conversion error "comparison between signed and unsigned integer
expre

fix(scmi): change function prototype to fix gcc error

Change function prototype of plat_css_get_scmi_info() to fix the GCC
sign conversion error "comparison between signed and unsigned integer
expressions". Changing channel_id type to unsigned int since it can
never be a negative value.

Signed-off-by: Tony K Nadackal <tony.nadackal@arm.com>
Change-Id: I579b21497329db40897c10d86c8fc68e4877f3db

show more ...

refactor(libc): clean up dependencies in libc

- Removing platform dependencies from libc modules.
- Replacing panicking with actual error handling.
- Debug macros are included indirectly from assert

refactor(libc): clean up dependencies in libc

- Removing platform dependencies from libc modules.
- Replacing panicking with actual error handling.
- Debug macros are included indirectly from assert.h. Removing
"platform_def.h" from assert.h and adding "common/debug.h"
where the macros are used.
- Removing hack for fixing PLAT_LOG_LEVEL_ASSERT to 40.
Instead removing assert with expression, as this
does not provide additional information.

Signed-off-by: Claus Pedersen <claustbp@google.com>
Change-Id: Icc201ea7b63c1277e423c1cfd13fd6816c2bc568

show more ...