xref: /rk3399_ARM-atf/include/plat/common/platform.h (revision 885e26830499284a7718f825579d6ebeb8b6cd89)
1 /*
2  * Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved.
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #ifndef PLATFORM_H
8 #define PLATFORM_H
9 
10 #include <stdint.h>
11 
12 #include <lib/psci/psci.h>
13 #if defined(SPD_spmd)
14  #include <services/spm_core_manifest.h>
15 #endif
16 #if ENABLE_RME
17 #include <services/rmm_core_manifest.h>
18 #endif
19 #if TRNG_SUPPORT
20 #include "plat_trng.h"
21 #endif
22 #include <drivers/fwu/fwu_metadata.h>
23 
24 /*******************************************************************************
25  * Forward declarations
26  ******************************************************************************/
27 struct auth_img_desc_s;
28 struct meminfo;
29 struct image_info;
30 struct entry_point_info;
31 struct image_desc;
32 struct bl_load_info;
33 struct bl_params;
34 struct mmap_region;
35 struct spm_mm_boot_info;
36 struct sp_res_desc;
37 enum fw_enc_status_t;
38 
39 /*******************************************************************************
40  * plat_get_rotpk_info() flags
41  ******************************************************************************/
42 #define ROTPK_IS_HASH			(1 << 0)
43 /* Flag used to skip verification of the certificate ROTPK while the platform
44    ROTPK is not deployed */
45 #define ROTPK_NOT_DEPLOYED		(1 << 1)
46 
47 /*******************************************************************************
48  * plat_get_enc_key_info() flags
49  ******************************************************************************/
50 /*
51  * Flag used to notify caller that information provided in key buffer is an
52  * identifier rather than an actual key.
53  */
54 #define ENC_KEY_IS_IDENTIFIER		(1 << 0)
55 
56 /*******************************************************************************
57  * Function declarations
58  ******************************************************************************/
59 /*******************************************************************************
60  * Mandatory common functions
61  ******************************************************************************/
62 unsigned int plat_get_syscnt_freq2(void);
63 
64 int plat_get_image_source(unsigned int image_id,
65 			uintptr_t *dev_handle,
66 			uintptr_t *image_spec);
67 uintptr_t plat_get_ns_image_entrypoint(void);
68 unsigned int plat_my_core_pos(void);
69 int plat_core_pos_by_mpidr(u_register_t mpidr);
70 int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size);
71 
72 #if STACK_PROTECTOR_ENABLED
73 /*
74  * Return a new value to be used for the stack protection's canary.
75  *
76  * Ideally, this value is a random number that is impossible to predict by an
77  * attacker.
78  */
79 u_register_t plat_get_stack_protector_canary(void);
80 #endif /* STACK_PROTECTOR_ENABLED */
81 
82 /*******************************************************************************
83  * Mandatory interrupt management functions
84  ******************************************************************************/
85 uint32_t plat_ic_get_pending_interrupt_id(void);
86 uint32_t plat_ic_get_pending_interrupt_type(void);
87 uint32_t plat_ic_acknowledge_interrupt(void);
88 uint32_t plat_ic_get_interrupt_type(uint32_t id);
89 void plat_ic_end_of_interrupt(uint32_t id);
90 uint32_t plat_interrupt_type_to_line(uint32_t type,
91 				     uint32_t security_state);
92 
93 /*******************************************************************************
94  * Optional interrupt management functions, depending on chosen EL3 components.
95  ******************************************************************************/
96 unsigned int plat_ic_get_running_priority(void);
97 int plat_ic_is_spi(unsigned int id);
98 int plat_ic_is_ppi(unsigned int id);
99 int plat_ic_is_sgi(unsigned int id);
100 unsigned int plat_ic_get_interrupt_active(unsigned int id);
101 void plat_ic_disable_interrupt(unsigned int id);
102 void plat_ic_enable_interrupt(unsigned int id);
103 int plat_ic_has_interrupt_type(unsigned int type);
104 void plat_ic_set_interrupt_type(unsigned int id, unsigned int type);
105 void plat_ic_set_interrupt_priority(unsigned int id, unsigned int priority);
106 void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target);
107 void plat_ic_raise_ns_sgi(int sgi_num, u_register_t target);
108 void plat_ic_raise_s_el1_sgi(int sgi_num, u_register_t target);
109 void plat_ic_set_spi_routing(unsigned int id, unsigned int routing_mode,
110 		u_register_t mpidr);
111 void plat_ic_set_interrupt_pending(unsigned int id);
112 void plat_ic_clear_interrupt_pending(unsigned int id);
113 unsigned int plat_ic_set_priority_mask(unsigned int mask);
114 unsigned int plat_ic_get_interrupt_id(unsigned int raw);
115 
116 /*******************************************************************************
117  * Optional common functions (may be overridden)
118  ******************************************************************************/
119 uintptr_t plat_get_my_stack(void);
120 void plat_report_exception(unsigned int exception_type);
121 int plat_crash_console_init(void);
122 int plat_crash_console_putc(int c);
123 void plat_crash_console_flush(void);
124 void plat_error_handler(int err) __dead2;
125 void plat_panic_handler(void) __dead2;
126 const char *plat_log_get_prefix(unsigned int log_level);
127 void bl2_plat_preload_setup(void);
128 int plat_try_next_boot_source(void);
129 
130 #if MEASURED_BOOT
131 int plat_mboot_measure_image(unsigned int image_id, image_info_t *image_data);
132 int plat_mboot_measure_critical_data(unsigned int critical_data_id,
133 				     const void *base,
134 				     size_t size);
135 #else
136 static inline int plat_mboot_measure_image(unsigned int image_id __unused,
137 					   image_info_t *image_data __unused)
138 {
139 	return 0;
140 }
141 static inline int plat_mboot_measure_critical_data(
142 					unsigned int critical_data_id __unused,
143 					const void *base __unused,
144 					size_t size __unused)
145 {
146 	return 0;
147 }
148 #endif /* MEASURED_BOOT */
149 
150 /*******************************************************************************
151  * Mandatory BL1 functions
152  ******************************************************************************/
153 void bl1_early_platform_setup(void);
154 void bl1_plat_arch_setup(void);
155 void bl1_platform_setup(void);
156 struct meminfo *bl1_plat_sec_mem_layout(void);
157 
158 /*******************************************************************************
159  * Optional EL3 component functions in BL31
160  ******************************************************************************/
161 
162 /* SDEI platform functions */
163 #if SDEI_SUPPORT
164 void plat_sdei_setup(void);
165 int plat_sdei_validate_entry_point(uintptr_t ep, unsigned int client_mode);
166 void plat_sdei_handle_masked_trigger(uint64_t mpidr, unsigned int intr);
167 #endif
168 
169 void plat_default_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie,
170 		void *handle, uint64_t flags);
171 void plat_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie,
172 		void *handle, uint64_t flags);
173 
174 /*
175  * The following function is mandatory when the
176  * firmware update feature is used.
177  */
178 int bl1_plat_mem_check(uintptr_t mem_base, unsigned int mem_size,
179 		unsigned int flags);
180 
181 /*******************************************************************************
182  * Optional BL1 functions (may be overridden)
183  ******************************************************************************/
184 /*
185  * The following functions are used for image loading process in BL1.
186  */
187 void bl1_plat_set_ep_info(unsigned int image_id,
188 		struct entry_point_info *ep_info);
189 /*
190  * The following functions are mandatory when firmware update
191  * feature is used and optional otherwise.
192  */
193 unsigned int bl1_plat_get_next_image_id(void);
194 struct image_desc *bl1_plat_get_image_desc(unsigned int image_id);
195 
196 /*
197  * The following functions are used by firmware update
198  * feature and may optionally be overridden.
199  */
200 __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved);
201 
202 /*
203  * This BL1 function can be used by the platforms to update/use image
204  * information for a given `image_id`.
205  */
206 int bl1_plat_handle_pre_image_load(unsigned int image_id);
207 int bl1_plat_handle_post_image_load(unsigned int image_id);
208 
209 #if MEASURED_BOOT
210 void bl1_plat_mboot_init(void);
211 void bl1_plat_mboot_finish(void);
212 #else
213 static inline void bl1_plat_mboot_init(void)
214 {
215 }
216 static inline void bl1_plat_mboot_finish(void)
217 {
218 }
219 #endif /* MEASURED_BOOT */
220 
221 /*******************************************************************************
222  * Mandatory BL2 functions
223  ******************************************************************************/
224 void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3);
225 void bl2_plat_arch_setup(void);
226 void bl2_platform_setup(void);
227 struct meminfo *bl2_plat_sec_mem_layout(void);
228 
229 /*
230  * This function can be used by the platforms to update/use image
231  * information for given `image_id`.
232  */
233 int bl2_plat_handle_pre_image_load(unsigned int image_id);
234 int bl2_plat_handle_post_image_load(unsigned int image_id);
235 
236 /*******************************************************************************
237  * Optional BL2 functions (may be overridden)
238  ******************************************************************************/
239 #if MEASURED_BOOT
240 void bl2_plat_mboot_init(void);
241 void bl2_plat_mboot_finish(void);
242 #else
243 static inline void bl2_plat_mboot_init(void)
244 {
245 }
246 static inline void bl2_plat_mboot_finish(void)
247 {
248 }
249 #endif /* MEASURED_BOOT */
250 
251 /*******************************************************************************
252  * Mandatory BL2 at EL3 functions: Must be implemented if BL2_AT_EL3 image is
253  * supported
254  ******************************************************************************/
255 void bl2_el3_early_platform_setup(u_register_t arg0, u_register_t arg1,
256 				  u_register_t arg2, u_register_t arg3);
257 void bl2_el3_plat_arch_setup(void);
258 
259 /*******************************************************************************
260  * Optional BL2 at EL3 functions (may be overridden)
261  ******************************************************************************/
262 void bl2_el3_plat_prepare_exit(void);
263 
264 /*******************************************************************************
265  * Mandatory BL2U functions.
266  ******************************************************************************/
267 void bl2u_early_platform_setup(struct meminfo *mem_layout,
268 		void *plat_info);
269 void bl2u_plat_arch_setup(void);
270 void bl2u_platform_setup(void);
271 
272 /*******************************************************************************
273  * Conditionally mandatory BL2U functions for CSS platforms.
274  ******************************************************************************/
275 /*
276  * This function is used to perform any platform-specific actions required to
277  * handle the BL2U_SCP firmware.
278  */
279 int bl2u_plat_handle_scp_bl2u(void);
280 
281 /*******************************************************************************
282  * Mandatory BL31 functions
283  ******************************************************************************/
284 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
285 		u_register_t arg2, u_register_t arg3);
286 void bl31_plat_arch_setup(void);
287 void bl31_platform_setup(void);
288 void bl31_plat_runtime_setup(void);
289 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type);
290 
291 /*******************************************************************************
292  * Mandatory PSCI functions (BL31)
293  ******************************************************************************/
294 int plat_setup_psci_ops(uintptr_t sec_entrypoint,
295 			const struct plat_psci_ops **psci_ops);
296 const unsigned char *plat_get_power_domain_tree_desc(void);
297 
298 /*******************************************************************************
299  * Optional PSCI functions (BL31).
300  ******************************************************************************/
301 void plat_psci_stat_accounting_start(const psci_power_state_t *state_info);
302 void plat_psci_stat_accounting_stop(const psci_power_state_t *state_info);
303 u_register_t plat_psci_stat_get_residency(unsigned int lvl,
304 			const psci_power_state_t *state_info,
305 			unsigned int last_cpu_idx);
306 plat_local_state_t plat_get_target_pwr_state(unsigned int lvl,
307 			const plat_local_state_t *states,
308 			unsigned int ncpu);
309 
310 /*******************************************************************************
311  * Mandatory BL31 functions when ENABLE_RME=1
312  ******************************************************************************/
313 #if ENABLE_RME
314 int plat_rmmd_get_cca_attest_token(uintptr_t buf, size_t *len,
315 				   uintptr_t hash, size_t hash_size);
316 int plat_rmmd_get_cca_realm_attest_key(uintptr_t buf, size_t *len,
317 				       unsigned int type);
318 size_t plat_rmmd_get_el3_rmm_shared_mem(uintptr_t *shared);
319 int plat_rmmd_load_manifest(rmm_manifest_t *manifest);
320 #endif
321 
322 /*******************************************************************************
323  * Optional BL31 functions (may be overridden)
324  ******************************************************************************/
325 void bl31_plat_enable_mmu(uint32_t flags);
326 
327 /*******************************************************************************
328  * Optional BL32 functions (may be overridden)
329  ******************************************************************************/
330 void bl32_plat_enable_mmu(uint32_t flags);
331 
332 /*******************************************************************************
333  * Trusted Board Boot functions
334  ******************************************************************************/
335 int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
336 			unsigned int *flags);
337 int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr);
338 int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr);
339 int plat_set_nv_ctr2(void *cookie, const struct auth_img_desc_s *img_desc,
340 		unsigned int nv_ctr);
341 int get_mbedtls_heap_helper(void **heap_addr, size_t *heap_size);
342 int plat_get_enc_key_info(enum fw_enc_status_t fw_enc_status, uint8_t *key,
343 			  size_t *key_len, unsigned int *flags,
344 			  const uint8_t *img_id, size_t img_id_len);
345 
346 /*******************************************************************************
347  * Secure Partitions functions
348  ******************************************************************************/
349 const struct mmap_region *plat_get_secure_partition_mmap(void *cookie);
350 const struct spm_mm_boot_info *plat_get_secure_partition_boot_info(
351 		void *cookie);
352 int plat_spm_sp_rd_load(struct sp_res_desc *rd, const void *ptr, size_t size);
353 int plat_spm_sp_get_next_address(void **sp_base, size_t *sp_size,
354 				 void **rd_base, size_t *rd_size);
355 #if defined(SPD_spmd)
356 int plat_spm_core_manifest_load(spmc_manifest_attribute_t *manifest,
357 				const void *pm_addr);
358 #endif
359 #if defined(SPMC_AT_EL3)
360 int plat_spmc_shmem_datastore_get(uint8_t **datastore, size_t *size);
361 #endif
362 
363 /*******************************************************************************
364  * Mandatory BL image load functions(may be overridden).
365  ******************************************************************************/
366 /*
367  * This function returns pointer to the list of images that the
368  * platform has populated to load.
369  */
370 struct bl_load_info *plat_get_bl_image_load_info(void);
371 
372 /*
373  * This function returns a pointer to the shared memory that the
374  * platform has kept aside to pass trusted firmware related
375  * information that next BL image could need.
376  */
377 struct bl_params *plat_get_next_bl_params(void);
378 
379 /*
380  * This function flushes to main memory all the params that are
381  * passed to next image.
382  */
383 void plat_flush_next_bl_params(void);
384 
385 /*
386  * The below function enable Trusted Firmware components like SPDs which
387  * haven't migrated to the new platform API to compile on platforms which
388  * have the compatibility layer disabled.
389  */
390 unsigned int platform_core_pos_helper(unsigned long mpidr);
391 
392 /*
393  * Optional function to get SOC version
394  */
395 int32_t plat_get_soc_version(void);
396 
397 /*
398  * Optional function to get SOC revision
399  */
400 int32_t plat_get_soc_revision(void);
401 
402 /*
403  * Optional function to check for SMCCC function availability for platform
404  */
405 int32_t plat_is_smccc_feature_available(u_register_t fid);
406 
407 /*******************************************************************************
408  * FWU platform specific functions
409  ******************************************************************************/
410 int plat_fwu_set_metadata_image_source(unsigned int image_id,
411 				       uintptr_t *dev_handle,
412 				       uintptr_t *image_spec);
413 void plat_fwu_set_images_source(const struct fwu_metadata *metadata);
414 uint32_t plat_fwu_get_boot_idx(void);
415 
416 #endif /* PLATFORM_H */
417