| /optee_os/core/arch/arm/plat-poplar/ |
| H A D | platform_config.h | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-bcm/ |
| H A D | platform_config.h | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-marvell/armada3700/ |
| H A D | hal_sec_perf.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-marvell/armada7k8k/ |
| H A D | hal_sec_perf.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-sprd/ |
| H A D | platform_config.h | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-sam/ |
| H A D | platform_config.h | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-ti/ |
| H A D | ti_pl310.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| H A D | platform_config.h | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-rpi3/ |
| H A D | platform_config.h | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/drivers/ |
| H A D | hi16xx_rng.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| H A D | dra7_rng.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| H A D | imx_wdog.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-imx/ |
| H A D | imx_pl310.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-d02/ |
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-synquacer/ |
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-zynqmp/ |
| H A D | platform_config.h | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-marvell/ |
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-zynq7k/ |
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-rockchip/ |
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|
| /optee_os/core/arch/arm/plat-k3/ |
| H A D | main.c | a5e82dc744f8a0ca7147714c0b0135af3714f778 Mon Feb 11 10:29:30 UTC 2019 Jerome Forissier <jerome.forissier@linaro.org> core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity
Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.
This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().
In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
|