drivers: hi16xx_rng: Switch to hw_get_random_bytes()

hw_get_random_byte() is no longer used. The default crypto_rng_read()
calls hw_get_random_bytes() now so implement just hw_get_random_bytes().

S

drivers: hi16xx_rng: Switch to hw_get_random_bytes()

hw_get_random_byte() is no longer used. The default crypto_rng_read()
calls hw_get_random_bytes() now so implement just hw_get_random_bytes().

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>

show more ...

core_mmu: fix phys_to_virt() to check length

phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because

core_mmu: fix phys_to_virt() to check length

phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.

core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.

Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)

show more ...

core: upgrade from write32() to io_write32() and friends

Replace use of readX() and writeX() with io_readX() and io_writeX().
The former function are about to be deprecated in favor to the later.

T

core: upgrade from write32() to io_write32() and friends

Replace use of readX() and writeX() with io_readX() and io_writeX().
The former function are about to be deprecated in favor to the later.

This change upgrades core generic code and drivers.
At some place, io_clrbitsX(), io_setbitsX() and io_clrsetbitsX()
replace the writeX(readX() ...) operations when obvious.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity

Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LP

core_mmu: do not restrict device memory mapping to PGDIR_SIZE granularity

Device memory registered via register_phys_mem() is currently rounded
up/down to CORE_MMU_PGDIR_SIZE (1 MiB, or 2 MiB for LPAE). This is not
needed and possibly incorrect for SoCs that define I/O memory maps with
regions aligned on a small page (4 KiB), because using a larger
granularity could result in overlaps between secure and non-secure
mappings. This could cause issues depending on the type of memory
firewall used by the SoC and its configuration. In any case, memory
types other than MEM_AREA_IO_{SEC,NSEC} *can* be mapped with small page
granularity using register_phys_mem(), so the situation is a bit
inconsistent.

This commit removes the rounding by default and provides a new macro:
register_phys_mem_pgdir(). Platforms that still need to use PGDIR_SIZE
granularity (typically because it consumes less page table space) need
to replace register_phys_mem() by register_phys_mem_pgdir().

In order to avoid any functional change in platform code, all calls to
register_phys_mem() with device memory are replaced with
register_phys_mem_pgdir(). In addition, CORE_MMU_DEVICE_SIZE is removed
and replaced with CORE_MMU_PGDIR_SIZE since there is no unique mapping
size for device memory anymore.

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

drivers: hi16xx_rng: replace mutex with spinlock

The mutex in hw_get_random_byte() protects a very short section of code.
A spinlock is more lightweight and therefore better suited to the task.

Sig

drivers: hi16xx_rng: replace mutex with spinlock

The mutex in hw_get_random_byte() protects a very short section of code.
A spinlock is more lightweight and therefore better suited to the task.

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

Remove 'All rights reserved' from Linaro files

The text 'All rights reserved' is useless [1]. The Free Software
Foundation's REUSE Initiative best practices document [2] does not
contain these words

Remove 'All rights reserved' from Linaro files

The text 'All rights reserved' is useless [1]. The Free Software
Foundation's REUSE Initiative best practices document [2] does not
contain these words. Therefore, we can safely remove the text from the
files that are owned by Linaro.

Generated by:
spdxify.py --linaro-only --strip-arr optee_os/

Link: [1] https://en.wikipedia.org/wiki/All_rights_reserved
Link: [2] https://reuse.software/practices/
Link: [3] https://github.com/jforissier/misc/blob/f7b56c8/spdxify.py
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Joakim Bech <joakim.bech@linaro.org>

show more ...

Remove license notice from Linaro files

Now that we have added SPDX identifiers, we can safely remove the
verbose license text from the files that are owned by Linaro.

Generated by [1]:
spdxify.p

Remove license notice from Linaro files

Now that we have added SPDX identifiers, we can safely remove the
verbose license text from the files that are owned by Linaro.

Generated by [1]:
spdxify.py --linaro-only --strip-license-text optee_os/

Link: [1] https://github.com/jforissier/misc/blob/f7b56c8/spdxify.py
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Joakim Bech <joakim.bech@linaro.org>

show more ...

Add SPDX license identifiers

Adds one SPDX-License-Identifier line [1] to each source files that
contains license text.

Generated by [2]:
spdxify.py --add-spdx optee_os/

The scancode tool [3] wa

Add SPDX license identifiers

Adds one SPDX-License-Identifier line [1] to each source files that
contains license text.

Generated by [2]:
spdxify.py --add-spdx optee_os/

The scancode tool [3] was used to double check the license matching
code in the Python script. All the licenses detected by scancode are
either detected by spdxify.py, or have no SPDX identifier, or are false
matches.

Link: [1] https://spdx.org/licenses/
Link: [2] https://github.com/jforissier/misc/blob/f7b56c8/spdxify.py
Link: [3] https://github.com/nexB/scancode-toolkit
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Joakim Bech <joakim.bech@linaro.org>

show more ...

drivers: add Hi16xx RNG driver

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: David Brown <david.brown@linaro.org>
Reviewed-by: etienne carriere <etienne.carriere@linaro.

drivers: add Hi16xx RNG driver

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: David Brown <david.brown@linaro.org>
Reviewed-by: etienne carriere <etienne.carriere@linaro.org>

show more ...