| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/media/i2c/ |
| H A D | ov5640.txt | 1 * Omnivision OV5640 MIPI CSI-2 / parallel sensor
4 - compatible: should be "ovti,ov5640"
13 This is an active low signal to the OV5640.
15 if any. This is an active high signal to the OV5640.
25 OV5640 can be connected to a MIPI CSI-2 bus or a parallel bus endpoint.
46 ov5640: camera@3c {
47 compatible = "ovti,ov5640";
72 ov5640: camera@3c {
73 compatible = "ovti,ov5640";
|
| /OK3568_Linux_fs/kernel/Documentation/admin-guide/media/ |
| H A D | imx.rst | 115 MIPI CSI-2 OV5640 sensor, requires the i.MX6 MIPI CSI-2 receiver. But
409 i.MX6Q SabreLite with OV5642 and OV5640
413 camera interface, and the OV5640 module with a MIPI CSI-2
425 The MIPI CSI-2 OV5640 module is connected to the i.MX internal MIPI CSI-2
428 vc2 directly to IPU2 CSI0, and vc3 to the IPU2 CSI1 mux. The OV5640 is
430 OV5640 must not share the same i2c slave address.
434 the OV5640, transmitting on MIPI CSI-2 virtual channel 1 (which is
437 OV5640 UYVY2X8:
445 # Setup links for OV5640
446 media-ctl -l "'ov5640 1-0040':0 -> 'imx6-mipi-csi2':0[1]"
[all …]
|
| H A D | omap4_camera.rst | 36 - OMAP4430SDP, w/ ES2.1 GP & SEVM4430-CAM-V1-0 (Contains IMX060 & OV5640, in
44 * OV5640
|
| H A D | imx6q-sabresd.dot | 54 …n00000087 [label="{{} | ov5640 1-003c\n/dev/v4l-subdev15 | {<port0> 0}}", shape=Mrecord, style=fil…
|
| H A D | i2c-cardlist.rst | 86 ov5640 OmniVision OV5640 sensor
|
| /OK3568_Linux_fs/kernel/arch/arm/boot/dts/ |
| H A D | sun8i-s3-pinecube.dts | 106 ov5640: camera@3c { label
107 compatible = "ovti,ov5640";
|
| H A D | imx6q-icore-mipi.dts | 27 &ov5640 {
|
| H A D | stm32mp157c-ev1.dts | 182 ov5640: camera@3c { label
183 compatible = "ovti,ov5640";
|
| H A D | imx6qdl-icore.dtsi | 199 ov5640: camera@3c { label
200 compatible = "ovti,ov5640";
|
| H A D | imx6-logicpd-baseboard.dtsi | 262 ov5640: camera@10 { label
263 compatible = "ovti,ov5640";
|
| H A D | dra76-evm.dts | 413 ov5640@3c {
414 compatible = "ovti,ov5640";
|
| H A D | dra72-evm-common.dtsi | 280 ov5640@3c {
281 compatible = "ovti,ov5640";
|
| H A D | imx6qdl-sabrelite.dtsi | 369 ov5640: camera@40 { label
370 compatible = "ovti,ov5640";
|
| H A D | imx6qdl-sabresd.dtsi | 315 ov5640: camera@3c { label
316 compatible = "ovti,ov5640";
|
| /OK3568_Linux_fs/buildroot/board/rockchip/rk3566_rk3568/fs-overlay/usr/share/matrix-gui-2.0/apps/qt5_camera/ |
| H A D | qt5_camera.desktop | 5 Icon=/usr/share/matrix-gui-2.0/apps/images/forlinx/ov5640-icon.png
|
| /OK3568_Linux_fs/buildroot/board/forlinx/ok3568/fs-overlay/usr/share/matrix-gui-2.0/apps/qt5_camera/ |
| H A D | qt5_camera.desktop | 5 Icon=/usr/share/matrix-gui-2.0/apps/images/forlinx/ov5640-icon.png
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/allwinner/ |
| H A D | sun50i-a64-amarula-relic.dts | 32 ov5640: camera@3c { label
33 compatible = "ovti,ov5640";
|
| H A D | sun50i-a64-pinetab.dts | 47 ov5640: camera@3c { label
48 compatible = "ovti,ov5640";
|
| /OK3568_Linux_fs/kernel/drivers/soc/rockchip/ |
| H A D | rk_camera_sensor_info.h | 32 #define RK29_CAM_SENSOR_OV5640 ov5640
80 #define RK29_CAM_SENSOR_NAME_OV5640 "ov5640"
|
| /OK3568_Linux_fs/buildroot/board/amarula/a64-relic/ |
| H A D | readme.txt | 12 - CSI: OV5640 sensor
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/media/ |
| H A D | ti,cal.yaml | 186 compatible = "ovti,ov5640";
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/ti/ |
| H A D | k3-am654-base-board.dts | 260 ov5640: camera@3c { label
261 compatible = "ovti,ov5640";
|
| /OK3568_Linux_fs/u-boot/board/boundary/nitrogen6x/ |
| H A D | nitrogen6x.c | 840 IMX_GPIO_NR(2, 5), /* ov5640 mipi camera reset */
846 IMX_GPIO_NR(6, 9), /* ov5640 mipi camera power down */
|
| /OK3568_Linux_fs/buildroot/board/rockchip/rk3566_rk3568/fs-overlay/usr/share/matrix-gui-2.0/ |
| H A D | json.txt | 1 …ategory":-1},{"Name":"Camera","Order":999,"Icon":"apps\/images\/forlinx\/ov5640-icon.png","Type":"…
|
| /OK3568_Linux_fs/kernel/drivers/media/i2c/ |
| H A D | ov5640.c | 229 struct clk *xclk; /* system clock to OV5640 */
1082 /* download ov5640 settings to sensor through i2c */
2000 * When configured in parallel mode, the OV5640 will in ov5640_set_power_dvp()
3169 {"ov5640", 0},
3175 { .compatible = "ovti,ov5640" },
3182 .name = "ov5640",
3192 MODULE_DESCRIPTION("OV5640 MIPI Camera Subdev Driver");
|