test(el3-runtime): dit is retained on world switch

Add tsp service to check the value of the PSTATE DIT bit is as
expected and toggle it's value. This is used to ensure that
the DIT bit is maintaine

test(el3-runtime): dit is retained on world switch

Add tsp service to check the value of the PSTATE DIT bit is as
expected and toggle it's value. This is used to ensure that
the DIT bit is maintained during a switch from the Normal to
Secure worlds and back.

Change-Id: I4e8bdfa6530e5e75925c0079d4fa2795133c5105
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

show more ...

fix(el3-runtime): set unset pstate bits to default

During a transition to a higher EL some of the PSTATE bits are not set
by hardware, this means that their state may be leaked from lower ELs.
This

fix(el3-runtime): set unset pstate bits to default

During a transition to a higher EL some of the PSTATE bits are not set
by hardware, this means that their state may be leaked from lower ELs.
This patch sets those bits to a default value upon entry to EL3.

This patch was tested using a debugger to check the PSTATE values
are correctly set. As well as adding a test in the next patch to
ensure the PSTATE in lower ELs is still maintained after this change.

Change-Id: Ie546acbca7b9aa3c86bd68185edded91b2a64ae5
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

show more ...

feat(ccidx): update the do_dcsw_op function to support FEAT_CCIDX

FEAT_CCIDX modifies the register fields in CCSIDR/CCSIDR2 (aarch32)
and CCSIDR_EL1 (aarch64). This patch adds a check to the do_dcsw

feat(ccidx): update the do_dcsw_op function to support FEAT_CCIDX

FEAT_CCIDX modifies the register fields in CCSIDR/CCSIDR2 (aarch32)
and CCSIDR_EL1 (aarch64). This patch adds a check to the do_dcsw_op
function to use the right register format rather than assuming
that FEAT_CCIDX is not implemented.

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I12cd00cd7b5889525d4d2750281a751dd74ef5dc

show more ...

feat(sme): enable SME functionality

This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively.

feat(sme): enable SME functionality

This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively. Setting ENABLE_SME_FOR_NS=1 will enable
SME for non-secure worlds and trap SME, SVE, and FPU/SIMD instructions
in secure context. Setting ENABLE_SME_FOR_SWD=1 will disable these
traps, but support for SME context management does not yet exist in
SPM so building with SPD=spmd will fail.

The existing ENABLE_SVE_FOR_NS and ENABLE_SVE_FOR_SWD options cannot
be used with SME as it is a superset of SVE and will enable SVE and
FPU/SIMD along with SME.

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iaaac9d22fe37b4a92315207891da848a8fd0ed73

show more ...

Merge "refactor(fvp_r): remove unused files and clean up makefiles" into integration

refactor(fvp_r): remove unused files and clean up makefiles

This patch removes files that are not used by TF-R as well as
removes unused generic files from the TF-R makefile.

Signed-off-by: John Po

refactor(fvp_r): remove unused files and clean up makefiles

This patch removes files that are not used by TF-R as well as
removes unused generic files from the TF-R makefile.

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Idb15ac295dc77fd38735bf2844efdb73e6f7c89b

show more ...

feat(mpmm): add support for MPMM

MPMM - the Maximum Power Mitigation Mechanism - is an optional
microarchitectural feature present on some Armv9-A cores, introduced
with the Cortex-X2, Cortex-A710 a

feat(mpmm): add support for MPMM

MPMM - the Maximum Power Mitigation Mechanism - is an optional
microarchitectural feature present on some Armv9-A cores, introduced
with the Cortex-X2, Cortex-A710 and Cortex-A510 cores.

MPMM allows the SoC firmware to detect and limit high activity events
to assist in SoC processor power domain dynamic power budgeting and
limit the triggering of whole-rail (i.e. clock chopping) responses to
overcurrent conditions.

This feature is enabled via the `ENABLE_MPMM` build option.
Configuration can be done via FCONF by enabling `ENABLE_MPMM_FCONF`, or
by via the plaform-implemented `plat_mpmm_topology` function.

Change-Id: I77da82808ad4744ece8263f0bf215c5a091c3167
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

refactor(amu): detect architected counters at runtime

This change removes the `AMU_GROUP0_COUNTERS_MASK` and
`AMU_GROUP0_MAX_COUNTERS` preprocessor definitions, instead retrieving
the number of grou

refactor(amu): detect architected counters at runtime

This change removes the `AMU_GROUP0_COUNTERS_MASK` and
`AMU_GROUP0_MAX_COUNTERS` preprocessor definitions, instead retrieving
the number of group 0 counters dynamically through `AMCGCR_EL0.CG0NC`.

Change-Id: I70e39c30fbd5df89b214276fac79cc8758a89f72
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

refactor(amu): factor out register accesses

This change introduces a small set of register getters and setters to
avoid having to repeatedly mask and shift in complex code.

Change-Id: Ia372f60c5efb

refactor(amu): factor out register accesses

This change introduces a small set of register getters and setters to
avoid having to repeatedly mask and shift in complex code.

Change-Id: Ia372f60c5efb924cd6eeceb75112e635ad13d942
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

fix(pie): invalidate data cache in the entire image range if PIE is enabled

Currently on image entry, the data cache in the RW address range is
invalidated before MMU is enabled to safeguard against

fix(pie): invalidate data cache in the entire image range if PIE is enabled

Currently on image entry, the data cache in the RW address range is
invalidated before MMU is enabled to safeguard against potential
stale data from previous firmware stage. If PIE is enabled however,
RO sections including the GOT may be also modified during pie fixup.
Therefore, to be on the safe side, invalidate the entire image
region if PIE is enabled.

Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I7ee2a324fe4377b026e32f9ab842617ad4e09d89

show more ...

Merge "feat(fvp_r): configure system registers to boot rich OS" into integration

feat(fvp_r): configure system registers to boot rich OS

Following system registers are modified before exiting EL2 to allow
u-boot/Linux to boot
1. CNTHCTL_EL2.EL1PCTEN -> 1
Allows U-boot to

feat(fvp_r): configure system registers to boot rich OS

Following system registers are modified before exiting EL2 to allow
u-boot/Linux to boot
1. CNTHCTL_EL2.EL1PCTEN -> 1
Allows U-boot to use physical counters at EL1
2. VTCR_EL2.MSA -> 1
Enables VMSA at EL1, which is required by U-Boot and Linux.
3. HCR_EL2.APK = 1 & HCR_EL2.API = 1
Disables PAuth instruction and register traps in EL1

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I58f45b6669a9ad1debb80265b243015c054a9bb1

show more ...

refactor(gpt): productize and refactor GPT library

This patch updates and refactors the GPT library and fixes bugs.

- Support all combinations of PGS, PPS, and L0GPTSZ parameters.
- PPS and PGS are

refactor(gpt): productize and refactor GPT library

This patch updates and refactors the GPT library and fixes bugs.

- Support all combinations of PGS, PPS, and L0GPTSZ parameters.
- PPS and PGS are set at runtime, L0GPTSZ is read from GPCCR_EL3.
- Use compiler definitions to simplify code.
- Renaming functions to better suit intended uses.
- MMU enabled before GPT APIs called.
- Add comments to make function usage more clear in GPT library.
- Added _rme suffix to file names to differentiate better from the
GPT file system code.
- Renamed gpt_defs.h to gpt_rme_private.h to better separate private
and public code.
- Renamed gpt_core.c to gpt_rme.c to better conform to TF-A precedent.

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I4cbb23b0f81e697baa9fb23ba458aa3f7d1ed919

show more ...

feat(rme): add RMM dispatcher (RMMD)

This patch introduces the RMM dispatcher into BL31. This
will be the mechanism that will enable communication to
take place between the Realm and non-secure worl

feat(rme): add RMM dispatcher (RMMD)

This patch introduces the RMM dispatcher into BL31. This
will be the mechanism that will enable communication to
take place between the Realm and non-secure world. Currently
gives the capability for granules to be
transitioned from non-secure type to realm and vice versa.

Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Change-Id: I1fdc99a4bdd42bc14911aa0c6954b131de309511

show more ...

feat(rme): run BL2 in root world when FEAT_RME is enabled

This patch enables BL2 to run in root world (EL3) which is
needed as per the security model of RME-enabled systems.

Using the existing BL2_

feat(rme): run BL2 in root world when FEAT_RME is enabled

This patch enables BL2 to run in root world (EL3) which is
needed as per the security model of RME-enabled systems.

Using the existing BL2_AT_EL3 TF-A build option is not convenient
because that option assumes TF-A BL1 doesn't exist, which is not
the case for RME-enabled systems. For the purposes of RME, we use
a normal BL1 image but we also want to run BL2 in EL3 as normally as
possible, therefore rather than use the special bl2_entrypoint
function in bl2_el3_entrypoint.S, we use a new bl2_entrypoint
function (in bl2_rme_entrypoint.S) which doesn't need reset or
mailbox initialization code seen in the el3_entrypoint_common macro.

The patch also cleans up bl2_el3_entrypoint.S, moving the
bl2_run_next_image function to its own file to avoid duplicating
code.

Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I99821b4cd550cadcb701f4c0c4dc36da81c7ef55

show more ...

feat(rme): add register definitions and helper functions for FEAT_RME

This patch adds new register and bit definitions for the Armv9-A
Realm Management Extension (RME) as described in the Arm
docume

feat(rme): add register definitions and helper functions for FEAT_RME

This patch adds new register and bit definitions for the Armv9-A
Realm Management Extension (RME) as described in the Arm
document DDI0615 (https://developer.arm.com/documentation/ddi0615/latest).

The patch also adds TLB maintenance functions and a function to
detect the presence of RME feature.

Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I03d2af7ea41a20a9e8a362a36b8099e3b4d18a11

show more ...

fvp_r: load, auth, and transfer from BL1 to BL33

Adding load, authentication, and transfer functionality from FVP R BL1 to
BL33, which will be the partner runtime code.

Signed-off-by: Lauren Wehrme

fvp_r: load, auth, and transfer from BL1 to BL33

Adding load, authentication, and transfer functionality from FVP R BL1 to
BL33, which will be the partner runtime code.

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I293cad09739dacac0d20dd57c1d98178dbe84d40

show more ...

chore: fvp_r: Initial No-EL3 and MPU Implementation

For v8-R64, especially R82, creating code to run BL1 at EL2, using MPU.

Signed-off-by: Gary Morrison <gary.morrison@arm.com>
Change-Id: I439ac39

chore: fvp_r: Initial No-EL3 and MPU Implementation

For v8-R64, especially R82, creating code to run BL1 at EL2, using MPU.

Signed-off-by: Gary Morrison <gary.morrison@arm.com>
Change-Id: I439ac3915b982ad1e61d24365bdd1584b3070425

show more ...

feat(hcx): add build option to enable FEAT_HCX

FEAT_HCX adds the extended hypervisor configuration register (HCRX_EL2)
and access to this register must be explicitly enabled through the
SCR_EL3.HXEn

feat(hcx): add build option to enable FEAT_HCX

FEAT_HCX adds the extended hypervisor configuration register (HCRX_EL2)
and access to this register must be explicitly enabled through the
SCR_EL3.HXEn bit. This patch adds a new build flag ENABLE_FEAT_HCX to
allow the register to be accessed from EL2.

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ibb36ad90622f1dc857adab4b0d4d7a89456a522b

show more ...

feat(trf): enable trace filter control register access from lower NS EL

Introduced a build flag 'ENABLE_TRF_FOR_NS' to enable trace filter
control registers access in NS-EL2, or NS-EL1 (when NS-EL2

feat(trf): enable trace filter control register access from lower NS EL

Introduced a build flag 'ENABLE_TRF_FOR_NS' to enable trace filter
control registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).

Change-Id: If3f53b8173a5573424b9a405a4bd8c206ffdeb8c
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

feat(trf): initialize trap settings of trace filter control registers access

Trap bits of trace filter control registers access are in
architecturally UNKNOWN state at boot hence

1. Initialized tra

feat(trf): initialize trap settings of trace filter control registers access

Trap bits of trace filter control registers access are in
architecturally UNKNOWN state at boot hence

1. Initialized trap bits to one to prohibit trace filter control
registers accesses in lower ELs (EL2, EL1) in all security states
when FEAT_TRF is implemented.
2. These bits are RES0 when FEAT_TRF is not implemented and hence set
it to zero to aligns with the Arm ARM reference recommendation,
that mentions software must writes RES0 bits with all 0s.

Change-Id: I1b7abf2170ece84ee585c91cda32d22b25c0fc34
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

feat(sys_reg_trace): enable trace system registers access from lower NS ELs

Introduced a build flag 'ENABLE_SYS_REG_TRACE_FOR_NS' to enable trace
system registers access in NS-EL2, or NS-EL1 (when N

feat(sys_reg_trace): enable trace system registers access from lower NS ELs

Introduced a build flag 'ENABLE_SYS_REG_TRACE_FOR_NS' to enable trace
system registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).

Change-Id: Idc1acede4186e101758cbf7bed5af7b634d7d18d
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

feat(sys_reg_trace): initialize trap settings of trace system registers access

Trap bits of trace system registers access are in architecturally
UNKNOWN state at boot hence

1. Initialized trap bits

feat(sys_reg_trace): initialize trap settings of trace system registers access

Trap bits of trace system registers access are in architecturally
UNKNOWN state at boot hence

1. Initialized trap bits to one to prohibit trace system registers
accesses in lower ELs (EL2, EL1) in all security states when system
trace registers are implemented.
2. These bits are RES0 in the absence of system trace register support
and hence set it to zero to aligns with the Arm ARM reference
recommendation,that mentions software must writes RES0 bits with
all 0s.

Change-Id: I4b6c15cda882325273492895d72568b29de89ca3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

feat(trbe): enable access to trace buffer control registers from lower NS EL

Introduced a build flag 'ENABLE_TRBE_FOR_NS' to enable trace buffer
control registers access in NS-EL2, or NS-EL1 (when N

feat(trbe): enable access to trace buffer control registers from lower NS EL

Introduced a build flag 'ENABLE_TRBE_FOR_NS' to enable trace buffer
control registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).

Change-Id: I285a672ccd395eebd377714c992bb21062a729cc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

feat(trbe): initialize trap settings of trace buffer control registers access

Trap bits of trace buffer control registers access are in
architecturally UNKNOWN state at boot hence

1. Initialized th

feat(trbe): initialize trap settings of trace buffer control registers access

Trap bits of trace buffer control registers access are in
architecturally UNKNOWN state at boot hence

1. Initialized these bits to zero to prohibit trace buffer control
registers accesses in lower ELs (EL2, EL1) in all security states
when FEAT_TRBE is implemented
2. Also, these bits are RES0 when FEAT_TRBE is not implemented, and
hence setting it to zero also aligns with the Arm ARM reference
recommendation, that mentions software must writes RES0 bits with
all 0s

Change-Id: If2752fd314881219f232f21d8e172a9c6d341ea1
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...