| /OK3568_Linux_fs/kernel/drivers/video/fbdev/omap/ |
| H A D | lcd_h3.c | 25 r = tps65010_set_gpio_out_value(GPIO2, HIGH); in h3_panel_enable()
39 tps65010_set_gpio_out_value(GPIO2, LOW); in h3_panel_disable()
|
| /OK3568_Linux_fs/kernel/drivers/pinctrl/ |
| H A D | pinctrl-xway.c | 118 MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY),
183 static const unsigned pins_gphy0_led2[] = {GPIO2};
203 static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9};
207 static const unsigned pins_exin2[] = {GPIO2};
227 static const unsigned pins_clkout3[] = {GPIO2};
354 MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY),
394 static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3};
396 static const unsigned ase_pins_ephy_led0[] = {GPIO2};
400 static const unsigned ase_pins_dfe_led1[] = {GPIO2};
482 MFP_XWAY(GPIO2, GPIO, CGU, EXIN, MII),
[all …]
|
| H A D | pinctrl-lantiq.h | 108 GPIO2, enumerator
|
| /OK3568_Linux_fs/u-boot/board/technexion/tao3530/ |
| H A D | tao3530.c | 136 writel(~(GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); in misc_init_r()
141 writel(GPIO10 | GPIO8 | GPIO2 | GPIO1, in misc_init_r()
|
| /OK3568_Linux_fs/kernel/arch/sh/kernel/cpu/sh4a/ |
| H A D | setup-shx3.c | 185 GPIO0, GPIO1, GPIO2, GPIO3, enumerator
233 INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0),
267 DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0,
303 GPIO2, GPIO1, GPIO0, IRM } },
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/gpio/ |
| H A D | gpio-axp209.txt | 60 not force GPIO1 and GPIO2 to be in gpio_in function as well).
68 GPIO2 | gpio_in, gpio_out
|
| /OK3568_Linux_fs/kernel/drivers/media/usb/dvb-usb/ |
| H A D | dib07x0.h | 8 GPIO2 = 3, enumerator
|
| /OK3568_Linux_fs/u-boot/board/Arcturus/ucp1020/ |
| H A D | ucp1020.h | 14 #define GPIO2 29 macro
|
| /OK3568_Linux_fs/u-boot/board/ti/beagle/ |
| H A D | beagle.c | 488 writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1, in misc_init_r()
494 writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); in misc_init_r()
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/pinctrl/ |
| H A D | ste,nomadik.txt | 114 pins = "GPIO0", "GPIO2";
125 pins = "GPIO0", "GPIO2";
|
| /OK3568_Linux_fs/kernel/include/linux/mfd/ |
| H A D | tps65010.h | 118 #define GPIO2 2 macro
|
| /OK3568_Linux_fs/kernel/arch/arm/mach-pxa/ |
| H A D | pxa300.c | 25 MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/interrupt-controller/ |
| H A D | rda,8810pl-intc.txt | 31 13: GPIO2
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/sound/ |
| H A D | rt5660.txt | 26 1: using GPIO2 pin as dmic1 data pin
|
| H A D | rt5668.txt | 17 1: using GPIO2 pin as dmic1 data pin
|
| H A D | rt5677.txt | 39 Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively.
|
| H A D | rt5682.txt | 17 1: using GPIO2 pin as dmic1 data pin
|
| H A D | rt5640.txt | 41 4: Use GPIO2 for jack-detect
|
| /OK3568_Linux_fs/kernel/arch/arm/boot/dts/ |
| H A D | ste-snowball.dts | 383 * the second is "GPIO2" and so forth. Confusingly, the
384 * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
388 "PM_GPIO1", /* AB8500 GPIO2 */
|
| H A D | bcm2837-rpi-cm3-io3.dts | 22 "GPIO2",
|
| H A D | bcm2835-rpi-cm1-io1.dts | 22 "GPIO2",
|
| /OK3568_Linux_fs/u-boot/arch/arm/include/asm/arch-omap3/ |
| H A D | omap.h | 112 #define GPIO2 (0x1 << 2) macro
|
| /OK3568_Linux_fs/kernel/Documentation/arm/ |
| H A D | netwinder.rst | 33 0x033a GPIO2
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/mfd/ |
| H A D | max77620.txt | 34 and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can be programmed
46 Each regulator, GPIO1, GPIO2, GPIO3, and 32KHz clock has a flexible power
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/clock/ |
| H A D | ti-clkctrl.txt | 56 Example: Clock consumer node for GPIO2:
|