| /OK3568_Linux_fs/kernel/arch/arm/boot/dts/ |
| H A D | mmp2-brownstone.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 7 /dts-v1/; 12 compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; 15 …t=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; 34 interrupt-parent = <&intcmux4>; 35 interrupt-controller; 36 #interrupt-cells = <1>; 37 maxim,tsc-irq = <0>; 41 regulator-min-microvolt = <637500>; 42 regulator-max-microvolt = <1425000>; [all …]
|
| H A D | exynos5420-smdk5420.dts | 1 // SPDX-License-Identifier: GPL-2.0 9 /dts-v1/; 11 #include "exynos5420-cpus.dtsi" 12 #include <dt-bindings/clock/samsung,s2mps11.h> 13 #include <dt-bindings/gpio/gpio.h> 16 model = "Samsung SMDK5420 board based on Exynos5420"; 26 stdout-path = "serial2:115200n8"; 29 fixed-rate-clocks { 31 compatible = "samsung,exynos5420-oscclk"; 32 clock-frequency = <24000000>; [all …]
|
| H A D | exynos4412-origen.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. 8 * Device tree source file for Insignal's Origen board which is based on 12 /dts-v1/; 14 #include <dt-bindings/clock/samsung,s2mps11.h> 15 #include <dt-bindings/gpio/gpio.h> 16 #include <dt-bindings/input/input.h> 17 #include "exynos-mfc-reserved-memory.dtsi" 20 model = "Insignal Origen evaluation board based on Exynos4412"; 29 stdout-path = "serial2:115200n8"; [all …]
|
| H A D | pxa910-dkb.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 7 /dts-v1/; 12 compatible = "mrvl,pxa910-dkb", "mrvl,pxa910"; 15 …t=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; 34 interrupt-parent = <&intc>; 35 interrupt-controller; 36 #interrupt-cells = <1>; 38 marvell,88pm860x-irq-read-clr; 39 marvell,88pm860x-slave-addr = <0x11>; 43 regulator-min-microvolt = <1000000>; [all …]
|
| H A D | rk3288-evb-rk808.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 4 #include "rk3288-evb.dtsi" 8 compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; 10 sdio_pwrseq: sdio-pwrseq { 11 compatible = "mmc-pwrseq-simple"; 13 clock-names = "ext_clock"; 14 pinctrl-names = "default"; 15 pinctrl-0 = <&wifi_enable_h>; 18 * On the module itself this is one of these (depending [all …]
|
| H A D | rk3288-vyasa.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 10 model = "Amarula Vyasa-RK3288"; 11 compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; 14 stdout-path = &uart2; 22 dc12_vbat: dc12-vbat { 23 compatible = "regulator-fixed"; 24 regulator-name = "dc12_vbat"; 25 regulator-min-microvolt = <12000000>; 26 regulator-max-microvolt = <12000000>; [all …]
|
| H A D | imx53-qsrb.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /dts-v1/; 8 #include "imx53-qsb-common.dtsi" 11 model = "Freescale i.MX53 Quick Start-R Board"; 12 compatible = "fsl,imx53-qsrb", "fsl,imx53"; 16 imx53-qsrb { 28 pinctrl-names = "default"; 29 pinctrl-0 = <&pinctrl_pmic>; 31 interrupt-parent = <&gpio5>; 35 regulator-name = "SW1"; [all …]
|
| H A D | exynos5250-arndale.dts | 1 // SPDX-License-Identifier: GPL-2.0 9 /dts-v1/; 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/interrupt-controller/irq.h> 12 #include <dt-bindings/input/input.h> 13 #include <dt-bindings/clock/samsung,s2mps11.h> 14 #include <dt-bindings/sound/samsung-i2s.h> 18 model = "Insignal Arndale evaluation board based on Exynos5250"; 27 stdout-path = "serial2:115200n8"; 31 compatible = "gpio-keys"; [all …]
|
| H A D | imx53-qsb.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /dts-v1/; 7 #include "imx53-qsb-common.dtsi" 11 compatible = "fsl,imx53-qsb", "fsl,imx53"; 16 compatible = "dlg,da9053-aa", "dlg,da9052"; 18 interrupt-parent = <&gpio7>; 19 interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */ 23 regulator-min-microvolt = <500000>; 24 regulator-max-microvolt = <2075000>; 25 regulator-always-on; [all …]
|
| H A D | exynos5410-odroidxu.dts | 1 // SPDX-License-Identifier: GPL-2.0 10 /dts-v1/; 12 #include <dt-bindings/clock/maxim,max77802.h> 13 #include <dt-bindings/gpio/gpio.h> 14 #include <dt-bindings/interrupt-controller/irq.h> 15 #include <dt-bindings/sound/samsung-i2s.h> 16 #include "exynos54xx-odroidxu-leds.dtsi" 20 compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5"; 28 stdout-path = "serial2:115200n8"; 32 pinctrl-0 = <&emmc_nrst_pin>; [all …]
|
| H A D | s5pv210-aquila.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. 13 /dts-v1/; 14 #include <dt-bindings/gpio/gpio.h> 15 #include <dt-bindings/input/input.h> 19 model = "Samsung Aquila based on S5PC110"; 36 pmic_ap_clk: clock-0 { 37 /* Workaround for missing clock on PMIC */ 38 compatible = "fixed-clock"; 39 #clock-cells = <0>; [all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/dts/ |
| H A D | exynos5422-odroidxu3.dts | 7 * SPDX-License-Identifier: GPL-2.0+ 10 /dts-v1/; 14 model = "Odroid XU3 based on EXYNOS5422"; 35 u-boot,dm-pre-reloc; 41 compatible = "samsung,s2mps11-pmic"; 43 voltage-regulators { 45 regulator-name = "vdd_ldo1"; 46 regulator-min-microvolt = <1000000>; 47 regulator-max-microvolt = <1000000>; 48 regulator-always-on; [all …]
|
| H A D | rk3128-evb.dts | 4 * SPDX-License-Identifier: GPL-2.0+ 7 /dts-v1/; 10 #include "rk3128-u-boot.dtsi" 14 compatible = "rockchip,rk3128-evb", "rockchip,rk3128"; 16 vcc_sys: vcc-sys { 17 compatible = "regulator-fixed"; 18 regulator-name = "vcc_sys"; 19 regulator-always-on; 20 regulator-boot-on; 21 regulator-min-microvolt = <5000000>; [all …]
|
| H A D | .rk3128-evb.dtb.pre.tmp | |
| H A D | am57xx-idk-common.dtsi | 2 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ 9 #include "am57xx-industrial-grade.dtsi" 18 stdout-path = &uart3; 21 vmain: fixedregulator-vmain { 22 compatible = "regulator-fixed"; 23 regulator-name = "VMAIN"; 24 regulator-min-microvolt = <5000000>; 25 regulator-max-microvolt = <5000000>; 26 regulator-always-on; 27 regulator-boot-on; [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/rockchip/ |
| H A D | rk3588-rk806-dual.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/pinctrl/rockchip.h> 12 assigned-clocks = <&cru CLK_SPI2>; 13 assigned-clock-rates = <200000000>; 14 num-cs = <2>; 18 spi-max-frequency = <1000000>; 21 interrupt-parent = <&gpio0>; 24 pinctrl-names = "default", "pmic-power-off"; 25 pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; [all …]
|
| H A D | rk3588s-rk806-dual.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/pinctrl/rockchip.h> 12 assigned-clocks = <&cru CLK_SPI2>; 13 assigned-clock-rates = <200000000>; 14 num-cs = <2>; 18 spi-max-frequency = <1000000>; 21 interrupt-parent = <&gpio0>; 24 pinctrl-names = "default", "pmic-power-off"; 25 pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; [all …]
|
| H A D | rk3588-rk806-single.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/pinctrl/rockchip.h> 12 assigned-clocks = <&cru CLK_SPI2>; 13 assigned-clock-rates = <200000000>; 14 pinctrl-names = "default"; 15 pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; 16 num-cs = <1>; 20 spi-max-frequency = <1000000>; 23 interrupt-parent = <&gpio0>; [all …]
|
| H A D | rk3399-evb-rev3.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 #include "rk3399-evb.dtsi" 8 #include <dt-bindings/suspend/rockchip-rk3399.h> 11 compatible = "rockchip,rk3399-evb-rev3", "rockchip,rk3399"; 13 vcc5v0_sys: vcc5v0-sys { 14 compatible = "regulator-fixed"; 15 regulator-name = "vcc5v0_sys"; 16 regulator-always-on; 17 regulator-boot-on; 18 regulator-min-microvolt = <5000000>; [all …]
|
| H A D | rk3399-evb-rev2.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 #include "rk3399-evb.dtsi" 8 #include "rk3399-early-opp.dtsi" 11 compatible = "rockchip,rk3399-evb-rev2", "rockchip,rk3399"; 13 vcc5v0_sys: vcc5v0-sys { 14 compatible = "regulator-fixed"; 15 regulator-name = "vcc5v0_sys"; 16 regulator-always-on; 17 regulator-boot-on; 18 regulator-min-microvolt = <5000000>; [all …]
|
| H A D | rk3399-evb.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 7 #include <dt-bindings/pwm/pwm.h> 12 compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; 15 compatible = "pwm-backlight"; 16 brightness-levels = < 49 default-brightness-level = <200>; 53 edp_panel: edp-panel { 54 compatible ="lg,lp079qx1-sp0v"; 56 enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; [all …]
|
| H A D | rk3399-evb-rev1.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 #include "rk3399-evb.dtsi" 8 #include "rk3399-early-opp.dtsi" 11 compatible = "rockchip,rk3399-evb-rev1", "rockchip,rk3399"; 13 vdd_log: vdd-log { 14 compatible = "pwm-regulator"; 18 regulator-name = "vdd_log"; 19 regulator-min-microvolt = <800000>; 20 regulator-max-microvolt = <1400000>; 21 regulator-always-on; [all …]
|
| H A D | rk3368-evb-act8846.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com> 6 /dts-v1/; 7 #include "rk3368-evb.dtsi" 11 compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368"; 15 clock-frequency = <400000>; 20 fcs,suspend-voltage-selector = <1>; 21 regulator-name = "vdd_cpu"; 22 regulator-min-microvolt = <850000>; 23 regulator-max-microvolt = <1350000>; [all …]
|
| H A D | rk3562-rk809.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/pinctrl/rockchip.h> 16 interrupt-parent = <&gpio0>; 19 pinctrl-names = "default", "pmic-sleep", 20 "pmic-power-off", "pmic-reset"; 21 pinctrl-0 = <&pmic_int>; 22 pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; 23 pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; 24 pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/mfd/ |
| H A D | rk818.txt | 4 - compatible: "rockchip,rk818" 5 - reg: I2C slave address 6 - interrupt-parent: The parent interrupt controller. 7 - interrupts: the interrupt outputs of the controller. 8 - #clock-cells: from common clock binding; shall be set to 1 (multiple clock 9 outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. 12 - clock-output-names: From common clock binding to override the 14 - rockchip,system-power-controller: Telling whether or not this pmic is controlling 16 - vcc1-supply: The input supply for DCDC_REG1 17 - vcc2-supply: The input supply for DCDC_REG2 [all …]
|