| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/net/ |
| H A D | fsl-enetc.txt | 1 * ENETC ethernet device tree bindings
5 below device tree bindings.
9 - reg : Specifies PCIe Device Number and Function
11 to parent node bindings.
12 - compatible : Should be "fsl,enetc".
14 1. The ENETC external port is connected to a MDIO configurable phy
18 In this case, the ENETC node should include a "mdio" sub-node
19 that in turn should contain the "ethernet-phy" node describing the
20 external phy. Below properties are required, their bindings
21 already defined in Documentation/devicetree/bindings/net/ethernet.txt or
[all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/phy/ |
| H A D | ti,phy-am654-serdes.txt | 4 - compatible: Should be "ti,phy-am654-serdes"
5 - reg : Address and length of the register set for the device.
6 - #phy-cells: determine the number of cells that should be given in the
7 phandle while referencing this phy. Should be "2". The 1st cell
8 corresponds to the phy type (should be one of the types specified in
9 include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes
12 0 - USB3
13 1 - PCIe0 Lane0
14 2 - ICSS2 SGMII Lane0
16 0 - PCIe1 Lane0
[all …]
|
| H A D | allwinner,sun9i-a80-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A80 USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun9i-a80-usb-phy
25 - description: Main PHY Clock
[all …]
|
| H A D | phy-lpc18xx-usb-otg.txt | 1 NXP LPC18xx/43xx internal USB OTG PHY binding
2 ---------------------------------------------
4 This file contains documentation for the internal USB OTG PHY found
8 - compatible : must be "nxp,lpc1850-usb-otg-phy"
9 - clocks : must be exactly one entry
10 See: Documentation/devicetree/bindings/clock/clock-bindings.txt
11 - #phy-cells : must be 0 for this phy
12 See: Documentation/devicetree/bindings/phy/phy-bindings.txt
14 The phy node must be a child of the creg syscon node.
18 compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
[all …]
|
| H A D | phy-rockchip-inno-usb2.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/phy-rockchip-inno-usb2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Rockchip USB2.0 phy with inno IP block
10 - Heiko Stuebner <heiko@sntech.de>
15 - rockchip,px30-usb2phy
16 - rockchip,rk1808-usb2phy
17 - rockchip,rk3128-usb2phy
18 - rockchip,rk3228-usb2phy
[all …]
|
| H A D | phy-cadence-torrent.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
5 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
7 title: Cadence Torrent SD0801 PHY binding
10 This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
12 PHY also supports multilink multiprotocol combinations including protocols
16 - Swapnil Jakhade <sjakhade@cadence.com>
17 - Yuti Amonkar <yamonkar@cadence.com>
22 - cdns,torrent-phy
[all …]
|
| H A D | samsung-phy.txt | 2 -------------------------------------------------
5 - compatible : should be one of the listed compatibles:
6 - "samsung,s5pv210-mipi-video-phy"
7 - "samsung,exynos5420-mipi-video-phy"
8 - "samsung,exynos5433-mipi-video-phy"
9 - #phy-cells : from the generic phy bindings, must be 1;
12 - syscon - phandle to the PMU system controller
14 In case of exynos5433 compatible PHY:
15 - samsung,pmu-syscon - phandle to the PMU system controller
16 - samsung,disp-sysreg - phandle to the DISP system registers controller
[all …]
|
| H A D | allwinner,sun8i-v3s-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner V3s USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun8i-v3s-usb-phy
22 - description: PHY Control registers
[all …]
|
| H A D | allwinner,sun8i-r40-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner R40 USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun8i-r40-usb-phy
22 - description: PHY Control registers
[all …]
|
| H A D | allwinner,sun8i-a23-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A23 USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
19 - allwinner,sun8i-a23-usb-phy
20 - allwinner,sun8i-a33-usb-phy
[all …]
|
| H A D | allwinner,sun50i-a64-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A64 USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun50i-a64-usb-phy
22 - description: PHY Control registers
[all …]
|
| H A D | allwinner,sun50i-h6-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner H6 USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun50i-h6-usb-phy
22 - description: PHY Control registers
[all …]
|
| H A D | allwinner,sun8i-a83t-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A83t USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun8i-a83t-usb-phy
22 - description: PHY Control registers
[all …]
|
| H A D | allwinner,sun6i-a31-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A31 USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun6i-a31-usb-phy
22 - description: PHY Control registers
[all …]
|
| H A D | allwinner,sun4i-a10-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A10 USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
19 - allwinner,sun4i-a10-usb-phy
20 - allwinner,sun7i-a20-usb-phy
[all …]
|
| H A D | allwinner,sun5i-a13-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A13 USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun5i-a13-usb-phy
22 - description: PHY Control registers
[all …]
|
| H A D | allwinner,sun8i-h3-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner H3 USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun8i-h3-usb-phy
22 - description: PHY Control registers
[all …]
|
| H A D | qcom,qusb2-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: "http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#"
6 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
8 title: Qualcomm QUSB2 phy controller
11 - Manu Gautam <mgautam@codeaurora.org>
19 - items:
20 - enum:
21 - qcom,ipq8074-qusb2-phy
22 - qcom,msm8996-qusb2-phy
[all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/pci/ |
| H A D | pci-keystone.txt | 6 Documentation/devicetree/bindings/pci/designware-pcie.txt
8 Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt
9 for the details of DesignWare DT bindings. Additional properties are
12 Required Properties:-
14 compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC
15 Should be "ti,am654-pcie-rc" for RC on AM654x SoC
16 reg: Three register ranges as listed in the reg-names property
17 reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
22 interrupt-cells: should be set to 1
24 (required if the compatible is "ti,keystone-pcie")
[all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/display/msm/ |
| H A D | dsi.txt | 5 - compatible:
6 * "qcom,mdss-dsi-ctrl"
7 - reg: Physical base address and length of the registers of controller
8 - reg-names: The names of register regions. The following regions are required:
10 - interrupts: The interrupt signal from the DSI block.
11 - power-domains: Should be <&mmcc MDSS_GDSC>.
12 - clocks: Phandles to device clocks.
13 - clock-names: the following clocks are required:
25 - assigned-clocks: Parents of "byte" and "pixel" for the given platform.
26 - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
[all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/usb/ |
| H A D | ti,keystone-dwc3.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/ti,keystone-dwc3.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Roger Quadros <rogerq@ti.com>
15 - enum:
16 - ti,keystone-dwc3
17 - ti,am654-dwc3
22 '#address-cells':
25 '#size-cells':
[all …]
|
| H A D | usb-nop-xceiv.txt | 1 USB NOP PHY
4 - compatible: should be usb-nop-xceiv
5 - #phy-cells: Must be 0
8 - clocks: phandle to the PHY clock. Use as per Documentation/devicetree
9 /bindings/clock/clock-bindings.txt
10 This property is required if clock-frequency is specified.
12 - clock-names: Should be "main_clk"
14 - clock-frequency: the clock frequency (in Hz) that the PHY clock must
17 - vcc-supply: phandle to the regulator that provides power to the PHY.
19 - reset-gpios: Should specify the GPIO for reset.
[all …]
|
| H A D | exynos-usb.txt | 8 - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
10 - reg: physical base address of the controller and length of memory mapped
12 - interrupts: interrupt number to the cpu.
13 - clocks: from common clock binding: handle to usb clock.
14 - clock-names: from common clock binding: Shall be "usbhost".
15 - phys: from the *Generic PHY* bindings; array specifying phy(s) used
17 - phy-names: from the *Generic PHY* bindings; array of the names for
18 each phy for the root ports, must be a subset of the following:
22 - samsung,vbus-gpio: if present, specifies the GPIO that
28 compatible = "samsung,exynos4210-ehci";
[all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/display/ |
| H A D | allwinner,sun8i-a83t-dw-hdmi.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings
11 IP with Allwinner\'s own PHY IP. It supports audio and video outputs
14 These DT bindings follow the Synopsys DWC HDMI TX bindings defined
15 in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with
16 the following device-specific properties.
19 - Chen-Yu Tsai <wens@csie.org>
[all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/media/ |
| H A D | imx7-mipi-csi2.txt | 5 --------------
7 This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is
8 compatible with previous version of Samsung D-phy.
12 - compatible : "fsl,imx7-mipi-csi2";
13 - reg : base address and length of the register set for the device;
14 - interrupts : should contain MIPI CSIS interrupt;
15 - clocks : list of clock specifiers, see
16 Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
17 - clock-names : must contain "pclk", "wrap" and "phy" entries, matching
19 - power-domains : a phandle to the power domain, see
[all …]
|