| /OK3568_Linux_fs/kernel/arch/arc/boot/dts/ |
| H A D | abilis_tb101.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 15 bus-frequency = <166666666>; 18 clock-frequency = <1000000000>; 21 clock-mult = <1>; 22 clock-div = <2>; 25 clock-mult = <1>; 26 clock-div = <6>; 31 pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ 34 pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ 37 pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ [all …]
|
| H A D | abilis_tb100.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 15 bus-frequency = <166666666>; 18 clock-frequency = <1000000000>; 21 clock-mult = <1>; 22 clock-div = <2>; 25 clock-mult = <1>; 26 clock-div = <6>; 31 pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ 34 pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ 37 pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm/boot/dts/ |
| H A D | hi3620.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2012-2013 Hisilicon Ltd. 6 * Copyright (C) 2012-2013 Linaro Ltd. 11 #include <dt-bindings/clock/hi3620-clock.h> 14 #address-cells = <1>; 15 #size-cells = <1>; 26 compatible = "fixed-clock"; 27 #clock-cells = <0>; 28 clock-frequency = <26000000>; 29 clock-output-names = "apb_pclk"; [all …]
|
| H A D | armada-xp-mv78260.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> 13 #include "armada-xp.dtsi" 17 compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; 26 #address-cells = <1>; 27 #size-cells = <0>; 28 enable-method = "marvell,armada-xp-smp"; 32 compatible = "marvell,sheeva-v7"; 35 clock-latency = <1000000>; 40 compatible = "marvell,sheeva-v7"; [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/hisilicon/ |
| H A D | hi3670.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/clock/hi3670-clock.h> 14 interrupt-parent = <&gic>; 15 #address-cells = <2>; 16 #size-cells = <2>; 19 compatible = "arm,psci-0.2"; 24 #address-cells = <2>; 25 #size-cells = <0>; 27 cpu-map { [all …]
|
| H A D | hi3660.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 9 #include <dt-bindings/clock/hi3660-clock.h> 10 #include <dt-bindings/thermal/thermal.h> 14 interrupt-parent = <&gic>; 15 #address-cells = <2>; 16 #size-cells = <2>; 19 compatible = "arm,psci-0.2"; 24 #address-cells = <2>; 25 #size-cells = <0>; [all …]
|
| H A D | hi3798cv200.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. 8 #include <dt-bindings/clock/histb-clock.h> 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/phy/phy.h> 12 #include <dt-bindings/reset/ti-syscon.h> 16 interrupt-parent = <&gic>; 17 #address-cells = <2>; 18 #size-cells = <2>; [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/pci/ |
| H A D | mvebu-pci.txt | 5 - compatible: one of the following values: 6 marvell,armada-370-pcie 7 marvell,armada-xp-pcie 8 marvell,dove-pcie 9 marvell,kirkwood-pcie 10 - #address-cells, set to <3> 11 - #size-cells, set to <2> 12 - #interrupt-cells, set to <1> 13 - bus-range: PCI bus numbers covered 14 - device_type, set to "pci" [all …]
|
| H A D | mediatek-pcie.txt | 4 - compatible: Should contain one of the following strings: 5 "mediatek,mt2701-pcie" 6 "mediatek,mt2712-pcie" 7 "mediatek,mt7622-pcie" 8 "mediatek,mt7623-pcie" 9 "mediatek,mt7629-pcie" 10 - device_type: Must be "pci" 11 - reg: Base addresses and lengths of the PCIe subsys and root ports. 12 - reg-names: Names of the above areas to use during resource lookup. 13 - #address-cells: Address representation for root ports (must be 3) [all …]
|
| H A D | faraday,ftpci100.txt | 5 plain and dual PCI. The plain version embeds a cascading interrupt controller 7 chips interrupt controller. 14 - compatible: ranging from specific to generic, should be one of 15 "cortina,gemini-pci", "faraday,ftpci100" 16 "cortina,gemini-pci-dual", "faraday,ftpci100-dual" 18 "faraday,ftpci100-dual" 19 - reg: memory base and size for the host bridge 20 - #address-cells: set to <3> 21 - #size-cells: set to <2> 22 - #interrupt-cells: set to <1> [all …]
|
| H A D | brcm,stb-pcie.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> 15 - enum: 16 - brcm,bcm2711-pcie # The Raspberry Pi 4 17 - brcm,bcm7211-pcie # Broadcom STB version of RPi4 18 - brcm,bcm7278-pcie # Broadcom 7278 Arm 19 - brcm,bcm7216-pcie # Broadcom 7216 Arm [all …]
|
| H A D | nvidia,tegra20-pcie.txt | 4 - compatible: Must be: 5 - "nvidia,tegra20-pcie": for Tegra20 6 - "nvidia,tegra30-pcie": for Tegra30 7 - "nvidia,tegra124-pcie": for Tegra124 and Tegra132 8 - "nvidia,tegra210-pcie": for Tegra210 9 - "nvidia,tegra186-pcie": for Tegra186 10 - power-domains: To ungate power partition by BPMP powergate driver. Must 13 - device_type: Must be "pci" 14 - reg: A list of physical base address and length for each set of controller 15 registers. Must contain an entry for each entry in the reg-names property. [all …]
|
| H A D | xgene-pci.txt | 1 * AppliedMicro X-Gene PCIe interface 4 - device_type: set to "pci" 5 - compatible: should contain "apm,xgene-pcie" to identify the core. 6 - reg: A list of physical base address and length for each set of controller 7 registers. Must contain an entry for each entry in the reg-names 9 - reg-names: Must include the following entries: 12 - #address-cells: set to <3> 13 - #size-cells: set to <2> 14 - ranges: ranges for the outbound memory, I/O regions. 15 - dma-ranges: ranges for the inbound memory regions. [all …]
|
| H A D | rcar-pci.txt | 1 * Renesas R-Car PCIe interface 4 compatible: "renesas,pcie-r8a7742" for the R8A7742 SoC; 5 "renesas,pcie-r8a7743" for the R8A7743 SoC; 6 "renesas,pcie-r8a7744" for the R8A7744 SoC; 7 "renesas,pcie-r8a774a1" for the R8A774A1 SoC; 8 "renesas,pcie-r8a774b1" for the R8A774B1 SoC; 9 "renesas,pcie-r8a774c0" for the R8A774C0 SoC; 10 "renesas,pcie-r8a7779" for the R8A7779 SoC; 11 "renesas,pcie-r8a7790" for the R8A7790 SoC; 12 "renesas,pcie-r8a7791" for the R8A7791 SoC; [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/gpio/ |
| H A D | socionext,uniphier-gpio.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/gpio/socionext,uniphier-gpio.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Masahiro Yamada <yamada.masahiro@socionext.com> 14 pattern: "^gpio@[0-9a-f]+$" 17 const: socionext,uniphier-gpio 22 gpio-controller: true 24 "#gpio-cells": 27 interrupt-controller: true [all …]
|
| /OK3568_Linux_fs/kernel/arch/mips/boot/dts/pic32/ |
| H A D | pic32mzda.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 #include <dt-bindings/clock/microchip,pic32-clock.h> 6 #include <dt-bindings/interrupt-controller/irq.h> 9 #address-cells = <1>; 10 #size-cells = <1>; 11 interrupt-parent = <&evic>; 33 #address-cells = <1>; 34 #size-cells = <0>; 43 compatible = "microchip,pic32mzda-infra"; 49 #clock-cells = <0>; [all …]
|
| /OK3568_Linux_fs/kernel/arch/powerpc/boot/dts/ |
| H A D | mpc8610_hpcd.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright 2007-2008 Freescale Semiconductor Inc. 8 /dts-v1/; 13 #address-cells = <1>; 14 #size-cells = <1>; 25 #address-cells = <1>; 26 #size-cells = <0>; 31 d-cache-line-size = <32>; 32 i-cache-line-size = <32>; 33 d-cache-size = <32768>; // L1 [all …]
|
| H A D | katmai.dts | 15 /dts-v1/; 18 #address-cells = <2>; 19 #size-cells = <2>; 22 dcr-parent = <&{/cpus/cpu@0}>; 32 #address-cells = <1>; 33 #size-cells = <0>; 39 clock-frequency = <0>; /* Filled in by zImage */ 40 timebase-frequency = <0>; /* Filled in by zImage */ 41 i-cache-line-size = <32>; 42 d-cache-line-size = <32>; [all …]
|
| H A D | redwood.dts | 11 /dts-v1/; 14 #address-cells = <2>; 15 #size-cells = <1>; 18 dcr-parent = <&{/cpus/cpu@0}>; 26 #address-cells = <1>; 27 #size-cells = <0>; 33 clock-frequency = <0>; /* Filled in by U-Boot */ 34 timebase-frequency = <0>; /* Filled in by U-Boot */ 35 i-cache-line-size = <32>; 36 d-cache-line-size = <32>; [all …]
|
| H A D | mpc8377_wlan.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 5 * Copyright 2007-2009 Freescale Semiconductor Inc. 9 /dts-v1/; 13 #address-cells = <1>; 14 #size-cells = <1>; 27 #address-cells = <1>; 28 #size-cells = <0>; 33 d-cache-line-size = <32>; 34 i-cache-line-size = <32>; 35 d-cache-size = <32768>; [all …]
|
| H A D | icon.dts | 11 /dts-v1/; 14 #address-cells = <2>; 15 #size-cells = <2>; 18 dcr-parent = <&{/cpus/cpu@0}>; 28 #address-cells = <1>; 29 #size-cells = <0>; 35 clock-frequency = <0>; /* Filled in by U-Boot */ 36 timebase-frequency = <0>; /* Filled in by U-Boot */ 37 i-cache-line-size = <32>; 38 d-cache-line-size = <32>; [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/interrupt-controller/ |
| H A D | arm,gic-v3.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: ARM Generic Interrupt Controller, version 3 10 - Marc Zyngier <marc.zyngier@arm.com> 15 Software Generated Interrupts (SGI), and Locality-specific Peripheral 19 - $ref: /schemas/interrupt-controller.yaml# 24 - items: 25 - enum: [all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/dts/ |
| H A D | stm32mp157-pinctrl.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved 6 #include <dt-bindings/pinctrl/stm32-pinfunc.h> 10 pinctrl: pin-controller@50002000 { 11 #address-cells = <1>; 12 #size-cells = <1>; 13 compatible = "st,stm32mp157-pinctrl"; 14 ranges = <0 0x50002000 0xa400>; 15 interrupt-parent = <&exti>; 17 pins-are-numbered; [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/mfd/ |
| H A D | st,stmfx.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: STMicroelectonics Multi-Function eXpander (STMFX) bindings 9 description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for 15 - Amelie Delaunay <amelie.delaunay@st.com> 19 const: st,stmfx-0300 27 drive-open-drain: true 29 vdd-supply: 37 const: st,stmfx-0300-pinctrl [all …]
|
| /OK3568_Linux_fs/kernel/drivers/staging/mt7621-pci/ |
| H A D | mediatek,mt7621-pci.txt | 4 - compatible: "mediatek,mt7621-pci" 5 - device_type: Must be "pci" 6 - reg: Base addresses and lengths of the PCIe subsys and root ports. 7 - bus-range: Range of bus numbers associated with this controller. 8 - #address-cells: Address representation for root ports (must be 3) 9 - pinctrl-names : The pin control state names. 10 - pinctrl-0: The "default" pinctrl state. 11 - #size-cells: Size representation for root ports (must be 2) 12 - ranges: Ranges for the PCI memory and I/O regions. 13 - #interrupt-cells: Must be 1 [all …]
|