| /OK3568_Linux_fs/u-boot/drivers/serial/ |
| H A D | mcfuart.c | 28 static int mcf_serial_init_common(uart_t *uart, int port_idx, int baudrate) in mcf_serial_init_common() argument
50 counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2)); in mcf_serial_init_common()
51 counter = counter / baudrate; in mcf_serial_init_common()
63 static void mcf_serial_setbrg_common(uart_t *uart, int baudrate) in mcf_serial_setbrg_common() argument
68 counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2)); in mcf_serial_setbrg_common()
69 counter = counter / baudrate; in mcf_serial_setbrg_common()
92 return mcf_serial_init_common(uart_base, port_idx, gd->baudrate); in mcf_serial_init()
124 mcf_serial_setbrg_common(uart, gd->baudrate); in mcf_serial_setbrg()
164 plat->port, plat->baudrate); in coldfire_serial_probe()
193 int coldfire_serial_setbrg(struct udevice *dev, int baudrate) in coldfire_serial_setbrg() argument
[all …]
|
| H A D | serial_lpuart.c | 105 int baudrate) in _lpuart_serial_setbrg() argument
111 sbr = (u16)(clk / (16 * baudrate)); in _lpuart_serial_setbrg()
175 _lpuart_serial_setbrg(plat, gd->baudrate); in _lpuart_serial_init()
183 int baudrate) in _lpuart32_serial_setbrg_7ulp() argument
189 baud_diff = baudrate; in _lpuart32_serial_setbrg_7ulp()
194 tmp_sbr = (clk / (baudrate * tmp_osr)); in _lpuart32_serial_setbrg_7ulp()
201 tmp_diff = tmp_diff - baudrate; in _lpuart32_serial_setbrg_7ulp()
204 if (tmp_diff > (baudrate - (clk / (tmp_osr * (tmp_sbr + 1))))) { in _lpuart32_serial_setbrg_7ulp()
205 tmp_diff = baudrate - (clk / (tmp_osr * (tmp_sbr + 1))); in _lpuart32_serial_setbrg_7ulp()
242 int baudrate) in _lpuart32_serial_setbrg() argument
[all …]
|
| H A D | serial-uclass.c | 281 ops->setbrg(gd->cur_serial_dev, gd->baudrate); in serial_setbrg()
324 void serial_dev_setbrg(struct udevice *dev, int baudrate) in serial_dev_setbrg() argument
333 ops->setbrg(dev, baudrate); in serial_dev_setbrg()
383 int baudrate; in on_baudrate() local
391 baudrate = simple_strtoul(value, NULL, 10); in on_baudrate()
394 if (gd->baudrate == baudrate) in on_baudrate()
398 if (baudrate == baudrate_table[i]) in on_baudrate()
404 baudrate); in on_baudrate()
409 baudrate); in on_baudrate()
413 gd->baudrate = baudrate; in on_baudrate()
[all …]
|
| H A D | atmel_usart.c | 31 int baudrate) in atmel_serial_setbrg_internal() argument
42 divisor = (usart_hz / 16 + baudrate / 2) / baudrate; in atmel_serial_setbrg_internal()
74 CONFIG_USART_ID, gd->baudrate); in atmel_serial_setbrg()
148 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
152 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
157 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
167 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
173 int atmel_serial_setbrg(struct udevice *dev, int baudrate) in atmel_serial_setbrg() argument
177 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
270 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| H A D | serial.c | 46 int baudrate; in on_baudrate() local
54 baudrate = simple_strtoul(value, NULL, 10); in on_baudrate()
57 if (gd->baudrate == baudrate) in on_baudrate()
61 if (baudrate == baudrate_table[i]) in on_baudrate()
67 baudrate); in on_baudrate()
72 " bps and press ENTER ...\n", baudrate); in on_baudrate()
76 gd->baudrate = baudrate; in on_baudrate()
96 U_BOOT_ENV_CALLBACK(baudrate, on_baudrate);
538 saved_baud = gd->baudrate; in uart_post_test()
561 gd->baudrate = bauds[b]; in uart_post_test()
[all …]
|
| H A D | serial_sti_asc.c | 29 u32 baudrate; member
81 static int _sti_asc_serial_setbrg(struct sti_asc_uart *uart, int baudrate) in _sti_asc_serial_setbrg() argument
86 switch (baudrate) { in _sti_asc_serial_setbrg()
102 baudrate); in _sti_asc_serial_setbrg()
113 writel(t, &uart->baudrate); in _sti_asc_serial_setbrg()
129 static int sti_asc_serial_setbrg(struct udevice *dev, int baudrate) in sti_asc_serial_setbrg() argument
134 return _sti_asc_serial_setbrg(uart, baudrate); in sti_asc_serial_setbrg()
178 sti_asc_serial_setbrg(dev, gd->baudrate); in sti_asc_serial_probe()
|
| H A D | serial_linflexuart.c | 42 static void _linflex_serial_setbrg(struct linflex_fsl *base, int baudrate) in _linflex_serial_setbrg() argument
47 if (!baudrate) in _linflex_serial_setbrg()
48 baudrate = CONFIG_BAUDRATE; in _linflex_serial_setbrg()
50 ibr = (u32) (clk / (16 * gd->baudrate)); in _linflex_serial_setbrg()
51 fbr = (u32) (clk % (16 * gd->baudrate)) * 16; in _linflex_serial_setbrg()
132 int linflex_serial_setbrg(struct udevice *dev, int baudrate) in linflex_serial_setbrg() argument
136 _linflex_serial_setbrg(priv->lfuart, baudrate); in linflex_serial_setbrg()
|
| H A D | serial_pl01x.c | 106 int clock, int baudrate) in pl01x_generic_setbrg() argument
115 switch (baudrate) { in pl01x_generic_setbrg()
161 temp = 16 * baudrate; in pl01x_generic_setbrg()
164 temp = (8 * remainder) / baudrate; in pl01x_generic_setbrg()
184 static void pl01x_serial_init_baud(int baudrate) in pl01x_serial_init_baud() argument
197 pl01x_generic_setbrg(base_regs, pl01x_type, clock, baudrate); in pl01x_serial_init_baud()
249 pl01x_serial_init_baud(gd->baudrate); in pl01x_serial_setbrg()
282 static int pl01x_serial_setbrg(struct udevice *dev, int baudrate) in pl01x_serial_setbrg() argument
289 baudrate); in pl01x_serial_setbrg()
|
| H A D | serial_pxa.c | 35 static uint32_t pxa_uart_get_baud_divider(int baudrate) in pxa_uart_get_baud_divider() argument
37 return 921600 / baudrate; in pxa_uart_get_baud_divider()
60 void pxa_setbrg_common(struct pxa_uart_regs *uart_regs, int port, int baudrate) in pxa_setbrg_common() argument
62 uint32_t divider = pxa_uart_get_baud_divider(baudrate); in pxa_setbrg_common()
105 pxa_setbrg_common(uart_regs, uart_index, gd->baudrate); in pxa_setbrg_dev()
274 plat->baudrate); in pxa_serial_probe()
304 int pxa_serial_setbrg(struct udevice *dev, int baudrate) in pxa_serial_setbrg() argument
310 pxa_setbrg_common(uart_regs, port, baudrate); in pxa_serial_setbrg()
|
| H A D | serial_mxc.c | 158 unsigned long baudrate, bool use_dte) in _mxc_serial_setbrg() argument
170 writel(clk / (2 * baudrate), &base->bmr); in _mxc_serial_setbrg()
189 if (!gd->baudrate) in mxc_serial_setbrg()
190 gd->baudrate = CONFIG_BAUDRATE; in mxc_serial_setbrg()
192 _mxc_serial_setbrg(mxc_base, clk, gd->baudrate, false); in mxc_serial_setbrg()
261 int mxc_serial_setbrg(struct udevice *dev, int baudrate) in mxc_serial_setbrg() argument
266 _mxc_serial_setbrg(plat->reg, clk, baudrate, plat->use_dte); in mxc_serial_setbrg()
|
| H A D | serial_ar933x.c | 61 u32 tscale, baudrate; in ar933x_serial_get_scale_step() local
79 baudrate = ar933x_serial_get_baud(clk, tscale, tstep); in ar933x_serial_get_scale_step()
80 diff = abs(baudrate - baud); in ar933x_serial_get_scale_step()
89 static int ar933x_serial_setbrg(struct udevice *dev, int baudrate) in ar933x_serial_setbrg() argument
95 ar933x_serial_get_scale_step(val, baudrate, &scale, &step); in ar933x_serial_setbrg()
|
| H A D | serial_sh.c | 70 sh_serial_setbrg_generic(struct uart_port *port, int clk, int baudrate) in sh_serial_setbrg_generic() argument
73 unsigned short dl = DL_VALUE(baudrate, clk); in sh_serial_setbrg_generic()
78 sci_out(port, SCBRR, SCBRR_VALUE(baudrate, clk)); in sh_serial_setbrg_generic()
175 static int sh_serial_setbrg(struct udevice *dev, int baudrate) in sh_serial_setbrg() argument
180 sh_serial_setbrg_generic(priv, plat->clk, baudrate); in sh_serial_setbrg()
296 sh_serial_setbrg_generic(port, CONFIG_SH_SCIF_CLK_FREQ, gd->baudrate); in sh_serial_setbrg()
|
| H A D | serial_pic32.c | 49 static int pic32_serial_init(void __iomem *base, ulong clk, u32 baudrate) in pic32_serial_init() argument
51 u32 div = DIV_ROUND_CLOSEST(clk, baudrate * 16); in pic32_serial_init()
102 static int pic32_uart_setbrg(struct udevice *dev, int baudrate) in pic32_uart_setbrg() argument
106 return pic32_serial_init(priv->base, priv->uartclk, baudrate); in pic32_uart_setbrg()
|
| /OK3568_Linux_fs/debian/overlay-debug/usr/bin/ |
| H A D | bt_pcba_test | 15 …-enable_hci --no2bytes --use_baudrate_for_download --tosleep 200000 --baudrate 1500000 --patchra…
19 …-enable_hci --no2bytes --use_baudrate_for_download --tosleep 200000 --baudrate 1500000 --patchra…
23 …-enable_hci --no2bytes --use_baudrate_for_download --tosleep 200000 --baudrate 1500000 --patchra…
27 …-enable_hci --no2bytes --use_baudrate_for_download --tosleep 200000 --baudrate 1500000 --patchra…
31 …-enable_hci --no2bytes --use_baudrate_for_download --tosleep 200000 --baudrate 1500000 --patchra…
35 …-enable_hci --no2bytes --use_baudrate_for_download --tosleep 200000 --baudrate 1500000 --patchra…
39 …-enable_hci --no2bytes --use_baudrate_for_download --tosleep 200000 --baudrate 1500000 --patchra…
43 …-enable_hci --no2bytes --use_baudrate_for_download --tosleep 200000 --baudrate 1500000 --patchra…
47 …-enable_hci --no2bytes --use_baudrate_for_download --tosleep 200000 --baudrate 1500000 --patchra…
|
| /OK3568_Linux_fs/kernel/drivers/usb/serial/ |
| H A D | kl5kusb105.c | 102 u8 baudrate; member
142 settings->pktlen, settings->baudrate, settings->databits, in klsi_105_chg_port_settings()
220 priv->cfg.baudrate = kl5kusb105a_sio_b9600; in klsi_105_port_probe()
265 cfg->baudrate = kl5kusb105a_sio_b9600; in klsi_105_open()
273 priv->cfg.baudrate = cfg->baudrate; in klsi_105_open()
426 priv->cfg.baudrate = kl5kusb105a_sio_b1200; in klsi_105_set_termios()
429 priv->cfg.baudrate = kl5kusb105a_sio_b2400; in klsi_105_set_termios()
432 priv->cfg.baudrate = kl5kusb105a_sio_b4800; in klsi_105_set_termios()
435 priv->cfg.baudrate = kl5kusb105a_sio_b9600; in klsi_105_set_termios()
438 priv->cfg.baudrate = kl5kusb105a_sio_b19200; in klsi_105_set_termios()
[all …]
|
| H A D | f81232.c | 131 static int calc_baud_divisor(speed_t baudrate, speed_t clockrate) in calc_baud_divisor() argument
133 return DIV_ROUND_CLOSEST(clockrate, baudrate); in calc_baud_divisor()
497 static int f81232_find_clk(speed_t baudrate) in f81232_find_clk() argument
502 if (baudrate <= baudrate_table[idx] && in f81232_find_clk()
503 baudrate_table[idx] % baudrate == 0) in f81232_find_clk()
511 struct usb_serial_port *port, speed_t baudrate, in f81232_set_baudrate() argument
520 speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE }; in f81232_set_baudrate()
523 baudrate = baud_list[i]; in f81232_set_baudrate()
524 if (baudrate == 0) { in f81232_set_baudrate()
529 idx = f81232_find_clk(baudrate); in f81232_set_baudrate()
[all …]
|
| /OK3568_Linux_fs/yocto/poky/meta/recipes-core/systemd/ |
| H A D | systemd-serialgetty.bb | 30 baudrate=`echo $entry | sed 's/\;.*//'`
32 if [ "$baudrate" = "$default_baudrate" ] ; then
37 # install custom service file for the non-default baudrate
38 … 0644 ${WORKDIR}/serial-getty@.service ${D}${systemd_system_unitdir}/serial-getty$baudrate@.service
39 …sed -i -e "s/\@BAUDRATE\@/$baudrate/g" ${D}${systemd_system_unitdir}/serial-getty$baudrate@.service
41 ln -sf ${systemd_system_unitdir}/serial-getty$baudrate@.service \
42 ${D}${sysconfdir}/systemd/system/getty.target.wants/serial-getty$baudrate@$ttydev.service
|
| /OK3568_Linux_fs/external/xserver/hw/xfree86/os-support/shared/ |
| H A D | posix_tty.c | 66 GetBaud(int baudrate) in GetBaud() argument
69 if (baudrate == 300) in GetBaud()
73 if (baudrate == 1200) in GetBaud()
77 if (baudrate == 2400) in GetBaud()
81 if (baudrate == 4800) in GetBaud()
85 if (baudrate == 9600) in GetBaud()
89 if (baudrate == 19200) in GetBaud()
93 if (baudrate == 38400) in GetBaud()
97 if (baudrate == 57600) in GetBaud()
101 if (baudrate == 115200) in GetBaud()
[all …]
|
| /OK3568_Linux_fs/u-boot/drivers/spi/ |
| H A D | cf_spi.c | 19 uint baudrate; member
207 if ((cfslave->baudrate > (gd->bus_clk >> 1)) || in cfspi_setup_slave()
208 (cfslave->baudrate < (gd->bus_clk / tmp))) { in cfspi_setup_slave()
216 (cfslave->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) { in cfspi_setup_slave()
263 if (tmp > cfslave->baudrate) in cfspi_setup_slave()
264 diff = tmp - cfslave->baudrate; in cfspi_setup_slave()
266 diff = cfslave->baudrate - tmp; in cfspi_setup_slave()
308 cfslave->baudrate = max_hz; in spi_setup_slave()
|
| /OK3568_Linux_fs/kernel/drivers/soc/rockchip/fiq_debugger/ |
| H A D | rk_fiq_debugger.c | 59 int baudrate; member
110 switch (t->baudrate) { in debug_port_init()
252 if (t->baudrate == 115200) in console_putc()
270 if (t->baudrate == 115200) in console_flush()
801 unsigned int baudrate) in fiq_debugger_bind_sip_smc() argument
827 sip_fiq_debugger_set_print_port(phy_base, baudrate); in fiq_debugger_bind_sip_smc()
843 int wakeup_irq, unsigned int baudrate) in rk_serial_debug_init() argument
865 t->baudrate = baudrate; in rk_serial_debug_init()
896 signal_irq, baudrate); in rk_serial_debug_init()
1017 unsigned int baudrate = 0, irq_mode = 0; in rk_fiqdbg_probe() local
[all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/serial/ |
| H A D | mvebu-uart.txt | 8 FIFO, baudrate limited to 230400).
11 accesses to the FIFO, baudrate unlimited by the dividers).
13 - clocks: UART reference clock used to derive the baudrate. If no clock
16 if the baudrate was initialized by the bootloader and no baudrate
|
| /OK3568_Linux_fs/app/forlinx/flapp/src/libs/core/ |
| H A D | serialport.cpp | 10 QSerialPort::BaudRate baudrate, in config() argument
16 this->setBaudRate(baudrate); in config()
31 bool SerialPort::config(const QString &name, int baudrate, int databits, int stopbit, int parity, i… in config() argument
33 QSerialPort::BaudRate b = (QSerialPort::BaudRate)baudrate; in config()
|
| /OK3568_Linux_fs/u-boot/arch/arm/mach-rockchip/ |
| H A D | spl.c | 242 gd->serial.baudrate = t->u.serial.baudrate; in board_init_f_boot_flags()
245 gd->baudrate = t->u.serial.baudrate; in board_init_f_boot_flags()
250 t->u.serial.baudrate, t->u.serial.id); in board_init_f_boot_flags()
254 gd->baudrate = CONFIG_BAUDRATE; in board_init_f_boot_flags()
255 gd->serial.baudrate = CONFIG_BAUDRATE; in board_init_f_boot_flags()
|
| /OK3568_Linux_fs/u-boot/cmd/ |
| H A D | load.c | 52 load_baudrate = current_baudrate = gd->baudrate; in do_load_serial()
76 gd->baudrate = load_baudrate; in do_load_serial()
119 gd->baudrate = current_baudrate; in do_load_serial()
249 save_baudrate = current_baudrate = gd->baudrate; in do_save_serial()
270 gd->baudrate = save_baudrate; in do_save_serial()
299 gd->baudrate = current_baudrate; in do_save_serial()
436 load_baudrate = current_baudrate = gd->baudrate; in do_load_serial_bin()
453 gd->baudrate = load_baudrate; in do_load_serial_bin()
505 gd->baudrate = current_baudrate; in do_load_serial_bin()
1046 int baudrate; in do_loadz_flash() local
[all …]
|
| /OK3568_Linux_fs/external/rkwifibt/tools/rtk_hciattach/ |
| H A D | hciattach_h4.c | 199 int h4_vendor_change_speed(int fd, uint32_t baudrate) in h4_vendor_change_speed() argument
209 baudrate = cpu_to_le32(baudrate); in h4_vendor_change_speed()
211 memcpy((uint16_t *) & cmd[4], &baudrate, 4); in h4_vendor_change_speed()
213 memcpy((uint16_t *) & cmd[4], &baudrate, 2); in h4_vendor_change_speed()
|