| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/pinctrl/ |
| H A D | marvell,kirkwood-pinctrl.txt | 28 mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk)
29 mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig)
32 mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
34 mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
36 mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig)
37 mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
42 mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd)
43 mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
66 mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk)
67 mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
[all …]
|
| H A D | marvell,armada-370-pinctrl.txt | 16 mpp0 0 gpio, uart0(rxd)
17 mpp1 1 gpo, uart0(txd)
18 mpp2 2 gpio, i2c0(sck), uart0(txd)
19 mpp3 3 gpio, i2c0(sda), uart0(rxd)
24 mpp8 8 gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
26 mpp10 10 gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
43 mpp22 22 gpo, ge0(txd6), ge1(txd2), uart0(rts)
48 mpp27 27 gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
59 mpp38 38 gpio, dev(ready), uart1(cts), uart0(cts)
61 mpp40 40 gpio, dev(ad1), uart1(rts), uart0(rts)
[all …]
|
| H A D | img,pistachio-pinctrl.txt | 108 mfio55 uart0, spim0, spim1
109 mfio56 uart0, spim0, spim1
110 mfio57 uart0, spim0, spim1
111 mfio58 uart0, spim1
183 uart0_xfer: uart0-xfer {
184 uart0-rxd {
186 function = "uart0";
188 uart0-txd {
190 function = "uart0";
194 uart0_rts_cts: uart0-rts-cts {
[all …]
|
| H A D | berlin,pinctrl.txt | 38 uart0_pmux: uart0-pmux {
40 function = "uart0";
44 &uart0 {
|
| H A D | nxp,lpc1850-scu.txt | 47 uart0_pins: uart0-pins {
50 function = "uart0";
57 function = "uart0";
|
| H A D | axis,artpec6-pinctrl.txt | 37 uart0: uart0grp0, uart0grp1, uart0grp2
60 function = "uart0";
70 uart0: uart@f8036000 {
|
| H A D | marvell,armada-375-pinctrl.txt | 32 mpp16 16 gpio, uart0(txd)
33 mpp17 17 gpio, uart0(rxd)
40 mpp24 24 gpio, led(p0), ge1(rxd0), sd(cmd), uart0(rts)
41 mpp25 25 gpio, led(p2), ge1(rxd1), sd(d0), uart0(cts)
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/arm/marvell/ |
| H A D | cp110-system-controller.txt | 91 mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sa…
92 mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), …
97 …1), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
98 mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd…
99 mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pcl…
101 mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
102 mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sa…
118 …i1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
119 …e0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
120 …(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
[all …]
|
| /OK3568_Linux_fs/kernel/arch/arm/ |
| H A D | Kconfig.debug | 121 bool "Kernel low-level debugging messages via Alpine UART0"
138 0x80000000 | 0xf0000000 | UART0
277 their output to the CNS3xxx UART0.
296 bool "Kernel low-level debugging on DaVinci DMx using UART0"
301 their output to UART0 serial port on DaVinci DMx devices.
497 bool "Kernel low-level debugging on KEYSTONE2 using UART0"
502 their output to UART0 serial port on KEYSTONE2 devices.
513 bool "Kernel low-level debugging via LPC18xx/43xx UART0"
518 on NXP LPC18xx/43xx UART0.
552 bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
[all …]
|
| /OK3568_Linux_fs/kernel/drivers/pinctrl/mvebu/ |
| H A D | pinctrl-armada-370.c | 24 MPP_FUNCTION(0x1, "uart0", "rxd")),
27 MPP_FUNCTION(0x1, "uart0", "txd")),
31 MPP_FUNCTION(0x2, "uart0", "txd")),
35 MPP_FUNCTION(0x2, "uart0", "rxd")),
59 MPP_FUNCTION(0x2, "uart0", "rts"),
71 MPP_FUNCTION(0x2, "uart0", "cts"),
140 MPP_FUNCTION(0x4, "uart0", "rts")),
165 MPP_FUNCTION(0x4, "uart0", "cts")),
211 MPP_FUNCTION(0x3, "uart0", "cts")),
220 MPP_FUNCTION(0x3, "uart0", "rts")),
[all …]
|
| H A D | pinctrl-armada-cp110.c | 49 MPP_FUNCTION(8, "uart0", "rxd"),
60 MPP_FUNCTION(8, "uart0", "txd"),
117 MPP_FUNCTION(8, "uart0", "rxd"),
127 MPP_FUNCTION(8, "uart0", "txd"),
135 MPP_FUNCTION(6, "uart0", "cts"),
154 MPP_FUNCTION(6, "uart0", "cts"),
162 MPP_FUNCTION(6, "uart0", "rts"),
255 MPP_FUNCTION(10, "uart0", "rts"),
268 MPP_FUNCTION(10, "uart0", "cts"),
281 MPP_FUNCTION(10, "uart0", "rxd"),
[all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/dts/ |
| H A D | hi6220-hikey.dts | 20 serial0 = &uart0; /* On board UART0 */
22 serial2 = &uart2; /* LS Expansion UART0 */
37 label = "LS-UART0";
|
| H A D | sama5d3_uart.dtsi | 16 serial5 = &uart0;
23 uart0 {
24 pinctrl_uart0: uart0-0 {
56 uart0: serial@f0024000 { label
|
| H A D | sun8i-a83t.dtsi | 177 uart0_pins_a: uart0@0 {
179 allwinner,function = "uart0";
184 uart0_pins_b: uart0@1 {
186 allwinner,function = "uart0";
207 uart0: serial@01c28000 { label
|
| /OK3568_Linux_fs/kernel/arch/arm/boot/dts/ |
| H A D | sama5d3_uart.dtsi | 15 serial5 = &uart0;
22 uart0 {
23 pinctrl_uart0: uart0-0 {
39 uart0: serial@f0024000 { label
|
| H A D | sun8i-r16-nintendo-nes-classic.dts | 14 serial0 = &uart0;
22 &uart0 {
24 * UART0 is available on two ports: PB and PF, both are accessible.
|
| H A D | lpc4350-hitex-eval.dts | 26 serial0 = &uart0;
33 stdout-path = &uart0;
325 uart0_pins: uart0-pins {
328 function = "uart0";
336 function = "uart0";
477 &uart0 {
|
| H A D | sd5203.dts | 22 serial0 = &uart0;
76 uart0: serial@1600d000 { label
79 bus_id = "uart0";
|
| H A D | uniphier-pinctrl.dtsi | 174 pinctrl_uart0: uart0 {
175 groups = "uart0";
176 function = "uart0";
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/sifive/ |
| H A D | sifive-blocks-ip-versioning.txt | 12 An example is "sifive,uart0" from:
23 "sifive,uart0" to indicate that their driver is compatible with the
33 IP block-specific compatible string (such as "sifive,uart0") should
38 compatible = "sifive,fu540-c000-uart", "sifive,uart0";
|
| /OK3568_Linux_fs/kernel/arch/powerpc/boot/ |
| H A D | 4xx.c | 335 u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; in ibm440gp_fixup_clocks() local
366 uart0 = ser_clk; in ibm440gp_fixup_clocks()
369 uart0 = plb / CPC0_CR0_UDIV(cr0); in ibm440gp_fixup_clocks()
386 dt_fixup_clock("/plb/opb/serial@40000200", uart0); in ibm440gp_fixup_clocks()
554 u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; in ibm405gp_fixup_clocks() local
596 /* uart0 uses the external clock */ in ibm405gp_fixup_clocks()
597 uart0 = ser_clk; in ibm405gp_fixup_clocks()
599 uart0 = cpu / udiv; in ibm405gp_fixup_clocks()
616 dt_fixup_clock("/plb/opb/serial@ef600300", uart0); in ibm405gp_fixup_clocks()
626 u32 cpu, plb, opb, ebc, uart0, uart1; in ibm405ep_fixup_clocks() local
[all …]
|
| /OK3568_Linux_fs/kernel/arch/arm/mach-s3c/ |
| H A D | irq-s3c24xx.c | 677 { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
684 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
685 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
686 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
746 { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
780 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
781 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
782 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
848 { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
855 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
[all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/clock/ |
| H A D | samsung,s5pv210-clock.txt | 68 uart0: serial@e2900000 {
75 clocks = <&clocks UART0>, <&clocks UART0>,
|
| /OK3568_Linux_fs/kernel/arch/mips/boot/dts/brcm/ |
| H A D | bcm3384_viper.dtsi | 46 uart0 = &uart0;
81 uart0: serial@14e00520 { label
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/bitmain/ |
| H A D | bm1880-sophon-edge.dts | 38 serial0 = &uart0;
146 pinctrl_uart0_default: pinctrl-uart0-default {
149 function = "uart0";
168 &uart0 {
|