| /OK3568_Linux_fs/u-boot/board/ti/dra7xx/ |
| H A D | mux_data.h | 16 {GPMC_AD0, (M3 | PIN_INPUT)}, /* gpmc_ad0.vout3_d0 */ 17 {GPMC_AD1, (M3 | PIN_INPUT)}, /* gpmc_ad1.vout3_d1 */ 18 {GPMC_AD2, (M3 | PIN_INPUT)}, /* gpmc_ad2.vout3_d2 */ 19 {GPMC_AD3, (M3 | PIN_INPUT)}, /* gpmc_ad3.vout3_d3 */ 20 {GPMC_AD4, (M3 | PIN_INPUT)}, /* gpmc_ad4.vout3_d4 */ 21 {GPMC_AD5, (M3 | PIN_INPUT)}, /* gpmc_ad5.vout3_d5 */ 22 {GPMC_AD6, (M3 | PIN_INPUT)}, /* gpmc_ad6.vout3_d6 */ 23 {GPMC_AD7, (M3 | PIN_INPUT)}, /* gpmc_ad7.vout3_d7 */ 24 {GPMC_AD8, (M3 | PIN_INPUT)}, /* gpmc_ad8.vout3_d8 */ 25 {GPMC_AD9, (M3 | PIN_INPUT)}, /* gpmc_ad9.vout3_d9 */ [all …]
|
| /OK3568_Linux_fs/u-boot/board/gumstix/duovero/ |
| H A D | duovero_mux_data.h | 57 {GPMC_A16, (PTU | IEN | M3)}, /* gpio_40 */ 58 {GPMC_A17, (PTU | IEN | M3)}, /* gpio_41 - hdmi_ls_oe */ 59 {GPMC_A18, (PTU | IEN | M3)}, /* gpio_42 */ 60 {GPMC_A19, (PTU | IEN | M3)}, /* gpio_43 - wifi_en */ 61 {GPMC_A20, (PTU | IEN | M3)}, /* gpio_44 - eth_irq */ 62 {GPMC_A21, (PTU | IEN | M3)}, /* gpio_45 - eth_nreset */ 63 {GPMC_A22, (PTU | IEN | M3)}, /* gpio_46 - eth_pme */ 64 {GPMC_A23, (PTU | IEN | M3)}, /* gpio_47 */ 65 {GPMC_A24, (PTU | IEN | M3)}, /* gpio_48 - eth_mdix */ 66 {GPMC_A25, (PTU | IEN | M3)}, /* gpio_49 - bt_wakeup */ [all …]
|
| /OK3568_Linux_fs/buildroot/dl/qt5location/git/tests/auto/qgeoroutexmlparser/ |
| H A D | route1.xml | 1 …M3"><Position><Latitude>-27.5711498</Latitude><Longitude>153.0900116</Longitude></Position><Instru…
|
| H A D | route2.xml | 1 …M3"><Position><Latitude>-27.5759907</Latitude><Longitude>153.0927582</Longitude></Position><Instru…
|
| /OK3568_Linux_fs/u-boot/board/compulab/cl-som-am57x/ |
| H A D | mux.c | 89 {VIN2A_D10, (PDIS | PTU | M3) }, /* VIN2A_D10.MDIO_MCLK */ 90 {VIN2A_D11, (IEN | PDIS | PTU | M3) }, /* VIN2A_D11.MDIO_D */ 92 {VIN2A_D12, (IDIS | PEN | M3) }, /* VIN2A_D12.RGMII1_TXC */ 93 {VIN2A_D13, (IDIS | PEN | M3) }, /* VIN2A_D13.RGMII1_TXCTL */ 94 {VIN2A_D14, (IDIS | PEN | M3) }, /* VIN2A_D14.RGMII1_TXD3 */ 95 {VIN2A_D15, (IDIS | PEN | M3) }, /* VIN2A_D15.RGMII1_TXD2 */ 96 {VIN2A_D16, (IDIS | PEN | M3) }, /* VIN2A_D16.RGMII1_TXD1 */ 97 {VIN2A_D17, (IDIS | PEN | M3) }, /* VIN2A_D17.RGMII1_TXD0 */ 98 {VIN2A_D18, (IEN | PDIS | PTD | M3) }, /* VIN2A_D18.RGMII1_RXC */ 99 {VIN2A_D19, (IEN | PDIS | PTD | M3) }, /* VIN2A_D19.RGMII1_RXCTL */ [all …]
|
| /OK3568_Linux_fs/u-boot/board/quipos/cairo/ |
| H A D | cairo.h | 85 MUX_VAL(CONTROL_PADCONF_ETK_CLK_ES2, (IDIS | PTU | EN | M3)) \ 86 MUX_VAL(CONTROL_PADCONF_ETK_CTL_ES2, (IDIS | PTU | EN | M3)) \ 87 MUX_VAL(CONTROL_PADCONF_ETK_D0_ES2, (IEN | PTU | EN | M3)) \ 88 MUX_VAL(CONTROL_PADCONF_ETK_D1_ES2, (IEN | PTU | EN | M3)) \ 89 MUX_VAL(CONTROL_PADCONF_ETK_D2_ES2, (IEN | PTU | EN | M3)) \ 90 MUX_VAL(CONTROL_PADCONF_ETK_D3_ES2, (IEN | PTU | EN | M3)) \ 91 MUX_VAL(CONTROL_PADCONF_ETK_D4_ES2, (IEN | PTD | EN | M3)) \ 92 MUX_VAL(CONTROL_PADCONF_ETK_D5_ES2, (IEN | PTD | EN | M3)) \ 93 MUX_VAL(CONTROL_PADCONF_ETK_D6_ES2, (IEN | PTD | EN | M3)) \ 94 MUX_VAL(CONTROL_PADCONF_ETK_D7_ES2, (IEN | PTD | EN | M3)) \ [all …]
|
| /OK3568_Linux_fs/u-boot/board/compulab/cm_t35/ |
| H A D | cm_t35.c | 254 MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT0*/ in cm_t3x_set_common_muxconf() 255 MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT1*/ in cm_t3x_set_common_muxconf() 256 MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT2*/ in cm_t3x_set_common_muxconf() 257 MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT3*/ in cm_t3x_set_common_muxconf() 258 MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT4*/ in cm_t3x_set_common_muxconf() 259 MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT5*/ in cm_t3x_set_common_muxconf() 260 MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT6*/ in cm_t3x_set_common_muxconf() 261 MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT7*/ in cm_t3x_set_common_muxconf() 262 MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DIR*/ in cm_t3x_set_common_muxconf() 263 MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_NXT*/ in cm_t3x_set_common_muxconf() [all …]
|
| /OK3568_Linux_fs/u-boot/board/compulab/cm_t3517/ |
| H A D | mux.c | 203 MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT0*/ in set_muxconf_regs() 204 MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT1*/ in set_muxconf_regs() 205 MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT2*/ in set_muxconf_regs() 206 MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT3*/ in set_muxconf_regs() 207 MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT4*/ in set_muxconf_regs() 208 MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT5*/ in set_muxconf_regs() 209 MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT6*/ in set_muxconf_regs() 210 MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT7*/ in set_muxconf_regs() 211 MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DIR*/ in set_muxconf_regs() 212 MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_NXT*/ in set_muxconf_regs() [all …]
|
| /OK3568_Linux_fs/buildroot/dl/qt5location/git/src/3rdparty/mapbox-gl-native/deps/boost/1.65.1/include/boost/fusion/container/vector/detail/cpp03/preprocessed/ |
| H A D | vector10.hpp | 568 : m0() , m1() , m2() , m3() {} in vector_data4() 578 …<U0>( arg0)) , m1(std::forward<U1>( arg1)) , m2(std::forward<U2>( arg2)) , m3(std::forward<U3>( ar… in vector_data4() 582 …std::forward<T1>( other.m1)) , m2(std::forward<T2>( other.m2)) , m3(std::forward<T3>( other.m3)) {} in vector_data4() 590 : m0(arg0) , m1(arg1) , m2(arg2) , m3(arg3) {} in vector_data4() 594 : m0(other.m0) , m1(other.m1) , m2(other.m2) , m3(other.m3) {} in vector_data4() 599 this->m0 = vec.m0; this->m1 = vec.m1; this->m2 = vec.m2; this->m3 = vec.m3; in operator =() 628 T0 m0; T1 m1; T2 m2; T3 m3; member 677 …::forward< T1>(vec.m1); this->m2 = std::forward< T2>(vec.m2); this->m3 = std::forward< T3>(vec.m3); in operator =() 688 : base_type(vec.m0 , vec.m1 , vec.m2 , vec.m3) {} in vector4() 714 this->m0 = vec.m0; this->m1 = vec.m1; this->m2 = vec.m2; this->m3 = vec.m3; in operator =() [all …]
|
| H A D | vector20.hpp | 19 : m0() , m1() , m2() , m3() , m4() , m5() , m6() , m7() , m8() , m9() , m10() {} in vector_data11() 29 …<U0>( arg0)) , m1(std::forward<U1>( arg1)) , m2(std::forward<U2>( arg2)) , m3(std::forward<U3>( ar… in vector_data11() 33 …::forward<T1>( other.m1)) , m2(std::forward<T2>( other.m2)) , m3(std::forward<T3>( other.m3)) , m4… in vector_data11() 41 …: m0(arg0) , m1(arg1) , m2(arg2) , m3(arg3) , m4(arg4) , m5(arg5) , m6(arg6) , m7(arg7) , m8(arg8)… in vector_data11() 45 …: m0(other.m0) , m1(other.m1) , m2(other.m2) , m3(other.m3) , m4(other.m4) , m5(other.m5) , m6(oth… in vector_data11() 50 …this->m0 = vec.m0; this->m1 = vec.m1; this->m2 = vec.m2; this->m3 = vec.m3; this->m4 = vec.m4; thi… in operator =() 79 T0 m0; T1 m1; T2 m2; T3 m3; T4 m4; T5 m5; T6 m6; T7 m7; T8 m8; T9 m9; T10 m10; member 128 …ard< T1>(vec.m1); this->m2 = std::forward< T2>(vec.m2); this->m3 = std::forward< T3>(vec.m3); this… in operator =() 139 …: base_type(vec.m0 , vec.m1 , vec.m2 , vec.m3 , vec.m4 , vec.m5 , vec.m6 , vec.m7 , vec.m8 , vec.m… in vector11() 165 …this->m0 = vec.m0; this->m1 = vec.m1; this->m2 = vec.m2; this->m3 = vec.m3; this->m4 = vec.m4; thi… in operator =() [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/soc/ti/ |
| H A D | wkup_m3_ipc.txt | 1 Wakeup M3 IPC Driver 4 The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor 5 (commonly referred to as Wakeup M3 or CM3) to help with various low power tasks 12 Wkup M3 Device Node: 20 "ti,am3352-wkup-m3-ipc" for AM33xx SoCs 21 "ti,am4372-wkup-m3-ipc" for AM43xx SoCs 23 with the Wakeup M3 processor 48 compatible = "ti,am3352-wkup-m3-ipc";
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/remoteproc/ |
| H A D | wkup_m3_rproc.txt | 1 TI Wakeup M3 Remoteproc Driver 4 The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor 5 (commonly referred to as Wakeup M3 or CM3) to help with various low power tasks 10 Wkup M3 Device Node: 12 A wkup_m3 device node is used to represent the Wakeup M3 processor instance 19 "ti,am3352-wkup-m3" for AM33xx SoCs 20 "ti,am4372-wkup-m3" for AM43xx SoCs 42 compatible = "ti,am3352-wkup-m3";
|
| /OK3568_Linux_fs/prebuilts/gcc/linux-x86/aarch64/gcc-arm-10.3-2021.07-x86_64-aarch64-none-linux-gnu/share/doc/as.html/ |
| H A D | s390-Aliases.html | 132 <tr><td width="40%"><pre class="display">crb R1,R2,M3,D4(B4)</pre></td><td width="40%"><pre clas… 133 <tr><td width="40%"><pre class="display">cgrb R1,R2,M3,D4(B4)</pre></td><td width="40%"><pre clas… 134 <tr><td width="40%"><pre class="display">crj R1,R2,M3,I4</pre></td><td width="40%"><pre class="d… 135 <tr><td width="40%"><pre class="display">cgrj R1,R2,M3,I4</pre></td><td width="40%"><pre class="d… 136 <tr><td width="40%"><pre class="display">cib R1,I2,M3,D4(B4)</pre></td><td width="40%"><pre clas… 137 <tr><td width="40%"><pre class="display">cgib R1,I2,M3,D4(B4)</pre></td><td width="40%"><pre clas… 138 <tr><td width="40%"><pre class="display">cij R1,I2,M3,I4</pre></td><td width="40%"><pre class="d… 139 <tr><td width="40%"><pre class="display">cgij R1,I2,M3,I4</pre></td><td width="40%"><pre class="d… 140 <tr><td width="40%"><pre class="display">crt R1,R2,M3</pre></td><td width="40%"><pre class="disp… 141 <tr><td width="40%"><pre class="display">cgrt R1,R2,M3</pre></td><td width="40%"><pre class="disp… [all …]
|
| /OK3568_Linux_fs/prebuilts/gcc/linux-x86/arm/gcc-arm-10.3-2021.07-x86_64-arm-none-linux-gnueabihf/share/doc/as.html/ |
| H A D | s390-Aliases.html | 132 <tr><td width="40%"><pre class="display">crb R1,R2,M3,D4(B4)</pre></td><td width="40%"><pre clas… 133 <tr><td width="40%"><pre class="display">cgrb R1,R2,M3,D4(B4)</pre></td><td width="40%"><pre clas… 134 <tr><td width="40%"><pre class="display">crj R1,R2,M3,I4</pre></td><td width="40%"><pre class="d… 135 <tr><td width="40%"><pre class="display">cgrj R1,R2,M3,I4</pre></td><td width="40%"><pre class="d… 136 <tr><td width="40%"><pre class="display">cib R1,I2,M3,D4(B4)</pre></td><td width="40%"><pre clas… 137 <tr><td width="40%"><pre class="display">cgib R1,I2,M3,D4(B4)</pre></td><td width="40%"><pre clas… 138 <tr><td width="40%"><pre class="display">cij R1,I2,M3,I4</pre></td><td width="40%"><pre class="d… 139 <tr><td width="40%"><pre class="display">cgij R1,I2,M3,I4</pre></td><td width="40%"><pre class="d… 140 <tr><td width="40%"><pre class="display">crt R1,R2,M3</pre></td><td width="40%"><pre class="disp… 141 <tr><td width="40%"><pre class="display">cgrt R1,R2,M3</pre></td><td width="40%"><pre class="disp… [all …]
|
| /OK3568_Linux_fs/kernel/drivers/soc/renesas/ |
| H A D | Kconfig | 213 bool "ARM64 Platform support for R-Car M3-N" 217 This enables support for the Renesas R-Car M3-N SoC. 220 bool "ARM64 Platform support for R-Car M3-W" 224 This enables support for the Renesas R-Car M3-W SoC. 227 bool "ARM64 Platform support for R-Car M3-W+" 231 This enables support for the Renesas R-Car M3-W+ SoC. 319 bool "System Controller support for R-Car M3-N" if COMPILE_TEST 323 bool "System Controller support for R-Car M3-W" if COMPILE_TEST 327 bool "System Controller support for R-Car M3-W+" if COMPILE_TEST
|
| /OK3568_Linux_fs/kernel/arch/s390/include/asm/ |
| H A D | vx-insn.h | 302 .macro VLEx vr1, disp, index="%r0", base, m3, opc 308 MRXBOPC \m3, \opc, v1 310 .macro VLEB vr1, disp, index="%r0", base, m3 311 VLEx \vr1, \disp, \index, \base, \m3, 0x00 313 .macro VLEH vr1, disp, index="%r0", base, m3 314 VLEx \vr1, \disp, \index, \base, \m3, 0x01 316 .macro VLEF vr1, disp, index="%r0", base, m3 317 VLEx \vr1, \disp, \index, \base, \m3, 0x03 319 .macro VLEG vr1, disp, index="%r0", base, m3 320 VLEx \vr1, \disp, \index, \base, \m3, 0x02 [all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/include/asm/arch-omap3/ |
| H A D | clocks_omap3.h | 199 #define CORE_M2_12 0x01 /* M3 of 2 */ 204 #define CORE_M2_12_ES1 0x1 /* M3 of 2 */ 209 #define CORE_M2_13 0x01 /* M3 of 2 */ 214 #define CORE_M2_13_ES1 0x01 /* M3 of 2 */ 219 #define CORE_M2_19P2 0x01 /* M3 of 2 */ 224 #define CORE_M2_19P2_ES1 0x01 /* M3 of 2 */ 229 #define CORE_M2_26 0x01 /* M3 of 2 */ 234 #define CORE_M2_26_ES1 0x01 /* M3 of 2 */ 239 #define CORE_M2_38P4 0x01 /* M3 of 2 */ 244 #define CORE_M2_38P4_ES1 0x01 /* M3 of 2 */
|
| /OK3568_Linux_fs/kernel/arch/sparc/kernel/ |
| H A D | traps_64.c | 1097 #define M3 145 macro 1101 /*00*/NONE, C0, C1, M2, C2, M2, M3, 47, C3, M2, M2, 53, M2, 41, 29, M, 1106 /*05*/M2, 44, 28, M2, M, M2, M2, 52, 68, M2, M2, 62, M2, M3, M3, M4, 1107 /*06*/M2, 26, 106, M2, 64, M, M2, 2, 120, M, M2, M3, M, M3, M3, M4, 1108 /*07*/116, M2, M2, M3, M2, M3, M, M4, M2, 58, 54, M2, M, M4, M4, M3, 1110 /*09*/M, 27, M, M, 99, M, M, 3, 114, M2, M2, 20, M2, M3, M3, M, 1111 /*0a*/M2, 23, 113, M2, 112, M2, M, 51, 95, M, M2, M3, M2, M3, M3, M2, 1112 /*0b*/103, M, M2, M3, M2, M3, M3, M4, M2, 48, M, M, 73, M2, M, M3, 1113 /*0c*/M2, 22, 110, M2, 109, M2, M, 9, 108, M2, M, M3, M2, M3, M3, M, 1114 /*0d*/102, M2, M, M, M2, M3, M3, M, M2, M3, M3, M2, M, M4, M, M3, [all …]
|
| /OK3568_Linux_fs/u-boot/board/ti/beagle/ |
| H A D | beagle.h | 263 MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)) /*HSUSB2_DATA2*/\ 264 MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)) /*HSUSB2_DATA7*/\ 265 MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)) /*HSUSB2_DATA4*/\ 266 MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)) /*HSUSB2_DATA5*/\ 267 MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)) /*HSUSB2_DATA6*/\ 268 MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)) /*HSUSB2_DATA3*/\ 269 MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\ 270 MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\ 271 MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DIR*/\ 272 MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_NXT*/\ [all …]
|
| /OK3568_Linux_fs/buildroot/package/am33x-cm3/ |
| H A D | 0001-fix-makefile.patch | 4 (which runs on a Cortex-M3 processor), but Buildroot will have a 6 Cortex-M3, leading to build failures (gcc complains that the 7 -mcpu=cortex-m3 option being passed is not compatible with the 26 -CFLAGS =-mcpu=cortex-m3 -mthumb -nostdlib -Wall -Wundef \ 27 +CFLAGS =-march=armv7-m -mcpu=cortex-m3 -mthumb -nostdlib -Wall -Wundef \
|
| /OK3568_Linux_fs/u-boot/board/amazon/kc1/ |
| H A D | kc1.h | 32 { GPMC_NCS2, (IEN | PTD | M3) }, /* gpio_52 */ 82 { UNIPRO_TX1, (IEN | DIS | M3) }, /* gpio_173 */ 83 { UNIPRO_TY1, (IEN | DIS | M3) }, /* gpio_174 */ 86 { UNIPRO_RX0, (IEN | DIS | M3) }, /* gpio_175 */ 87 { UNIPRO_RY0, (IEN | DIS | M3) }, /* gpio_176 */ 88 { UNIPRO_RX1, (IEN | DIS | M3) }, /* gpio_177 */ 89 { UNIPRO_RY1, (IEN | DIS | M3) }, /* gpio_178 */
|
| /OK3568_Linux_fs/u-boot/board/nokia/rx51/ |
| H A D | rx51.h | 259 MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | DIS | M3)) /*HSUSB2_DA2*/\ 260 MUX_VAL(CP(MCSPI2_CLK), (IEN | PTU | DIS | M3)) /*HSUSB2_DA7*/\ 261 MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTU | DIS | M3)) /*HSUSB2_DA4*/\ 262 MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTU | DIS | M3)) /*HSUSB2_DA5*/\ 263 MUX_VAL(CP(MCSPI2_CS0), (IEN | PTU | DIS | M3)) /*HSUSB2_DA6*/\ 264 MUX_VAL(CP(MCSPI2_CS1), (IEN | PTU | DIS | M3)) /*HSUSB2_DA3*/\ 265 MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\ 266 MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\ 267 MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DIR*/\ 268 MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_NXT*/\ [all …]
|
| /OK3568_Linux_fs/u-boot/arch/x86/cpu/intel_common/ |
| H A D | me_status.c | 27 [ME_HFS_STATE_M3] = "M3 without UMA", 70 [0x07] = "S0/M0->Sx/M3", 71 [0x08] = "Sx/M3->S0/M0", 73 [0x0a] = "Power cycle reset through M3", 93 [0x11] = "Bringup in M3", 96 [0x15] = "M3 clock switching error", 97 [0x18] = "M3 kernel load",
|
| /OK3568_Linux_fs/u-boot/board/ti/am57xx/ |
| H A D | mux_data.h | 104 {VIN2A_D12, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d12.rgmii1_txc */ 105 {VIN2A_D13, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d13.rgmii1_txctl */ 106 {VIN2A_D14, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d14.rgmii1_txd3 */ 107 {VIN2A_D15, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d15.rgmii1_txd2 */ 108 {VIN2A_D16, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d16.rgmii1_txd1 */ 109 {VIN2A_D17, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d17.rgmii1_txd0 */ 110 {VIN2A_D18, (M3 | PIN_INPUT | MANUAL_MODE)}, /* vin2a_d18.rgmii1_rxc */ 111 {VIN2A_D19, (M3 | PIN_INPUT | MANUAL_MODE)}, /* vin2a_d19.rgmii1_rxctl */ 112 {VIN2A_D20, (M3 | PIN_INPUT | MANUAL_MODE)}, /* vin2a_d20.rgmii1_rxd3 */ 113 {VIN2A_D21, (M3 | PIN_INPUT | MANUAL_MODE)}, /* vin2a_d21.rgmii1_rxd2 */ [all …]
|
| /OK3568_Linux_fs/u-boot/board/htkw/mcx/ |
| H A D | mcx.h | 265 MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M3)) \ 267 MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M3)) \ 269 MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M3)) \ 271 MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | DIS | M3)) \ 273 MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | DIS | M3)) \ 349 MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTD | DIS | M3)) \ 351 MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)) \ 353 MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)) \ 354 MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)) \ 355 MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)) \ [all …]
|