Home
last modified time | relevance | path

Searched +full:100 +full:us (Results 1 – 25 of 1392) sorted by relevance

12345678910>>...56

/OK3568_Linux_fs/u-boot/drivers/net/
H A Dftmac110.h2 * Faraday 10/100Mbps Ethernet Controller
54 #define MACCR_100M (1 << 18) /* 100Mbps mode */
85 #define ITC_TX_CYCLONG (1 << 15) /* 100Mbps=81.92us; 10Mbps=819.2us */
86 #define ITC_TX_CYCNORM (0 << 15) /* 100Mbps=5.12us; 10Mbps=51.2us */
92 #define ITC_RX_CYCLONG (1 << 7) /* 100Mbps=81.92us; 10Mbps=819.2us */
93 #define ITC_RX_CYCNORM (0 << 7) /* 100Mbps=5.12us; 10Mbps=51.2us */
107 #define APTC_TX_CYCLONG (1 << 12) /* 100Mbps=81.92us; 10Mbps=819.2us */
108 #define APTC_TX_CYCNORM (0 << 12) /* 100Mbps=5.12us; 10Mbps=51.2us */
112 #define APTC_RX_CYCLONG (1 << 4) /* 100Mbps=81.92us; 10Mbps=819.2us */
113 #define APTC_RX_CYCNORM (0 << 4) /* 100Mbps=5.12us; 10Mbps=51.2us */
/OK3568_Linux_fs/kernel/Documentation/fb/
H A Dviafb.modes15 # Sync Width 3.813 us 0.064 ms
17 # Front Porch 0.636 us 0.318 ms
19 # Back Porch 1.907 us 1.048 ms
21 # Active Time 25.422 us 15.253 ms
23 # Blank Time 6.356 us 1.430 ms
40 # Sync Width 2.032 us 0.080 ms
42 # Front Porch 0.508 us 0.027 ms
44 # Back Porch 3.810 us 0.427 ms
46 # Active Time 20.317 us 12.800 ms
48 # Blank Time 6.349 us 0.533 ms
[all …]
/OK3568_Linux_fs/kernel/sound/soc/codecs/
H A Dmax98373.c88 9, 10, TLV_DB_SCALE_ITEM(500, 100, 0),
91 0, 9, TLV_DB_SCALE_ITEM(800, 100, 0),
95 2, 4, TLV_DB_SCALE_ITEM(100, 100, 0),
98 0, 9, TLV_DB_SCALE_ITEM(800, 100, 0),
105 10, 13, TLV_DB_SCALE_ITEM(-500, 100, 0),
106 14, 15, TLV_DB_SCALE_ITEM(-100, 50, 0),
109 0, 15, TLV_DB_SCALE_ITEM(-1500, 100, 0),
126 "17.5us", "35us", "70us", "140us",
127 "280us", "560us", "1120us", "2240us"
144 "10us", "20us", "40us", "80us",
[all …]
/OK3568_Linux_fs/kernel/samples/bpf/
H A Dtracex3_user.c16 #define SLOTS 100
68 printf("|1ns |10ns |100ns |1us |10us |100us" in print_banner()
69 " |1ms |10ms |100ms |1s |10s\n"); in print_banner()
71 printf("|1us |10us |100us |1ms |10ms " in print_banner()
72 "|100ms |1s |10s\n"); in print_banner()
H A Dhbm_kern.h39 #define INITIAL_CREDIT_PACKETS 100
46 #define MAX_CREDIT (100 * MAX_BYTES_PER_PACKET)
50 #define BURST_SIZE_NS 100000 // 100us
51 #define MARK_THRESH_NS 50000 // 50us
52 #define DROP_THRESH_NS 500000 // 500us
53 // Reserve 20us of queuing for small packets (less than 120 bytes)
/OK3568_Linux_fs/kernel/tools/testing/selftests/rcutorture/bin/
H A Dkvm-recheck-rcuscale-ftrace.sh18 if test "`grep -c 'rcu_exp_grace_period.*start' < $i/console.log`" -lt 100
24 grep 'us : rcu_exp_grace_period' |
25 sed -e 's/us : / : /' |
44 print "Long GP " starttime "us to " $3 "us (" curgpdur "us)";
63 pct50 = int(newNR * 50 / 100);
66 pct90 = int(newNR * 90 / 100);
69 pct99 = int(newNR * 99 / 100);
72 div = 10 ** int(log(gptimes[pct90]) / log(10) + .5) / 100;
/OK3568_Linux_fs/kernel/tools/power/cpupower/bench/
H A DREADME-BENCH34 You can specify load (100% CPU load) and sleep (0% CPU load) times in us which
53 100ms load/sleep time repeated 20 times (cycles).
69 100% CPU load (load) | 0 % CPU load (sleep) | round
92 100 0 100 0 100 0 100 load seen by ondemand(%)
109 -l, --load=<long int> initial load time in us
110 -s, --sleep=<long int> initial sleep time in us
111 -x, --load-step=<long int> time to be added to load time, in us
112 -y, --sleep-step=<long int> time to be added to sleep time, in us
/OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/arm/
H A Didle-states.yaml286 entry-latency-us:
290 exit-latency-us:
293 The exit-latency-us duration may be guaranteed only after
294 entry-latency-us has passed.
296 min-residency-us:
302 wakeup-latency-us:
308 entry-latency-us + exit-latency-us
312 systems entry-latency-us + exit-latency-us will exceed
313 wakeup-latency-us by this duration.
322 - entry-latency-us
[all …]
/OK3568_Linux_fs/kernel/drivers/net/wireless/rockchip_wlan/rtl8723bu/hal/phydm/
H A Drtchnlplan.c49 3 2G_FCC1 5G_NULL 22h US 2G NA
52 6 2G_FCC1 5G_FCC1 25h US 2G US 5G �K�j��{��
56 10 2G_WORLD 5G_FCC2 29h Worldwird 13 US o/w DFS Channels
61 15 2G_FCC1 5G_FCC7 34h US 2G US/Canada �K�j��{��
66 20 2G_FCC1 5G_NCC1 39h US 2G Taiwan �K�j��{��
78 3 2G_FCC1 FCC 1~11 2412~2462 US
89 100~140" "5180~5240, 5260~5230
92 100~140, 149~165" "5180~5240, 5260~5230
95 100~132, 149~165"
99 100~140, 149~165"
[all …]
/OK3568_Linux_fs/kernel/drivers/net/wireless/rockchip_wlan/rtl8189es/hal/phydm/
H A Drtchnlplan.c49 3 2G_FCC1 5G_NULL 22h US 2G NA
52 6 2G_FCC1 5G_FCC1 25h US 2G US 5G �K�j��{��
56 10 2G_WORLD 5G_FCC2 29h Worldwird 13 US o/w DFS Channels
61 15 2G_FCC1 5G_FCC7 34h US 2G US/Canada �K�j��{��
66 20 2G_FCC1 5G_NCC1 39h US 2G Taiwan �K�j��{��
78 3 2G_FCC1 FCC 1~11 2412~2462 US
89 100~140" "5180~5240, 5260~5230
92 100~140, 149~165" "5180~5240, 5260~5230
95 100~132, 149~165"
99 100~140, 149~165"
[all …]
/OK3568_Linux_fs/kernel/drivers/net/wireless/rockchip_wlan/rtl8822be/hal/phydm/
H A Drtchnlplan.c50 3 2G_FCC1 5G_NULL 22h US 2G NA
53 6 2G_FCC1 5G_FCC1 25h US 2G US 5G �K�j��{��
57 10 2G_WORLD 5G_FCC2 29h Worldwird 13 US o/w DFS Channels
62 15 2G_FCC1 5G_FCC7 34h US 2G US/Canada �K�j��{��
67 20 2G_FCC1 5G_NCC1 39h US 2G Taiwan �K�j��{��
79 3 2G_FCC1 FCC 1~11 2412~2462 US
90 100~140" "5180~5240, 5260~5230
93 100~140, 149~165" "5180~5240, 5260~5230
96 100~132, 149~165"
100 100~140, 149~165"
[all …]
/OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/input/touchscreen/
H A Dstmpe.txt14 0 -> 10 us
15 1 -> 50 us
16 2 -> 100 us
17 3 -> 500 us
23 0 -> 10 us
24 1 -> 100 us
25 2 -> 500 us
30 7 -> 100 ms
/OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/thermal/
H A Dthermal-idle.yaml34 duration-us:
38 exit-latency-us:
60 cpu_b0: cpu@100 {
71 duration-us = <10000>;
72 exit-latency-us = <500>;
87 duration-us = <10000>;
88 exit-latency-us = <500>;
100 polling-delay-passive = <100>;
134 cooling-device = <&{/cpus/cpu@100/thermal-idle} 0 15 >,
/OK3568_Linux_fs/kernel/drivers/iio/humidity/
H A Ddht11.c46 * 0-bit: 22-30uS -- typically 26uS (AM2302)
47 * 1-bit: 68-75uS -- typically 70uS (AM2302)
52 * timeres > 34uS ... don't know what a 1-tick pulse is
53 * 34uS > timeres > 30uS ... no problem (30kHz and 32kHz clocks)
54 * 30uS > timeres > 23uS ... don't know what a 2-tick pulse is
55 * timeres < 23uS ... no problem
64 #define DHT11_START_TRANSMISSION_MIN 18000 /* us */
65 #define DHT11_START_TRANSMISSION_MAX 20000 /* us */
152 if (hum_int < 4) { /* DHT22: 100000 = (3*256+232)*100 */ in dht11_decode()
154 ((temp_int & 0x80) ? -100 : 100); in dht11_decode()
[all …]
/OK3568_Linux_fs/kernel/drivers/leds/trigger/
H A Dledtrig-activity.c72 /* We come here every 100ms in the worst case, so that's 100M ns of in led_activity_function()
74 * down to 16us, ensuring we won't overflow 32-bit computations below in led_activity_function()
86 usage = 100; in led_activity_function()
88 usage = 100 * diff_used / diff_boot; in led_activity_function()
110 * This gives us : in led_activity_function()
111 * - a target CPU usage of min(50%, 100%/#CPU) for a 10% duty cycle in led_activity_function()
117 * ON_ms = 10 + (usage-target)/(100%-target) * 80 in led_activity_function()
118 * OFF_ms = 90 - (usage-target)/(100%-target) * 80 in led_activity_function()
121 * 100 ms and keep track of the sleep time left. This allows us to in led_activity_function()
125 activity_data->time_left -= 100; in led_activity_function()
[all …]
/OK3568_Linux_fs/u-boot/arch/arm/cpu/arm926ejs/mx27/
H A Dtimer.c40 /* ~0.4% error - measured with stop-watch on 100s boot-delay */
55 static inline unsigned long long us_to_tick(unsigned long long us) in us_to_tick() argument
57 us = us * CONFIG_MX27_CLK32 + 999999; in us_to_tick()
58 do_div(us, 1000000); in us_to_tick()
59 return us; in us_to_tick()
78 static inline unsigned long long us_to_tick(unsigned long long us) in us_to_tick() argument
80 us += US_PER_TICK - 1; in us_to_tick()
81 do_div(us, US_PER_TICK); in us_to_tick()
82 return us; in us_to_tick()
100 for (i = 0; i < 100; i++) in timer_init()
/OK3568_Linux_fs/kernel/drivers/regulator/
H A Drtmv20-regulator.c78 usleep_range(RTMV20_I2CRDY_TIMEUS, RTMV20_I2CRDY_TIMEUS + 100); in rtmv20_lsw_enable()
208 { "richtek,ld-pulse-delay-us", 0, 0, 100000, 100, RTMV20_REG_PULSEDELAY, in rtmv20_properties_init()
210 { "richtek,ld-pulse-width-us", 1200, 0, 10000, 1, RTMV20_REG_PULSEWIDTH, in rtmv20_properties_init()
212 { "richtek,fsin1-delay-us", 23000, 0, 100000, 100, RTMV20_REG_FSIN1CTRL1, in rtmv20_properties_init()
214 { "richtek,fsin1-width-us", 160, 40, 10000, 40, RTMV20_REG_FSIN1CTRL3, in rtmv20_properties_init()
216 { "richtek,fsin2-delay-us", 23000, 0, 100000, 100, RTMV20_REG_FSIN2CTRL1, in rtmv20_properties_init()
218 { "richtek,fsin2-width-us", 160, 40, 10000, 40, RTMV20_REG_FSIN2CTRL3, in rtmv20_properties_init()
220 { "richtek,es-pulse-width-us", 1200, 0, 10000, 1, RTMV20_REG_ESPULSEWIDTH, in rtmv20_properties_init()
344 usleep_range(RTMV20_I2CRDY_TIMEUS, RTMV20_I2CRDY_TIMEUS + 100); in rtmv20_probe()
/OK3568_Linux_fs/kernel/drivers/gpu/arm/midgard/
H A Dmali_kbase_config_defaults.h112 // #define DEFAULT_PM_DVFS_PERIOD 100 /* 100ms */
123 #define DEFAULT_PM_GPU_POWEROFF_TICK_NS (400000) /* 400us */
128 #define DEFAULT_PM_POWEROFF_TICK_SHADER (2) /* 400-800us */
133 #define DEFAULT_PM_POWEROFF_TICK_GPU (2) /* 400-800us */
138 #define DEFAULT_JS_SCHEDULING_PERIOD_NS (100000000u) /* 100ms */
146 #define DEFAULT_JS_SOFT_STOP_TICKS (1) /* 100ms-200ms */
151 #define DEFAULT_JS_SOFT_STOP_TICKS_CL (1) /* 100ms-200ms */
/OK3568_Linux_fs/kernel/drivers/input/touchscreen/
H A Dstmpe-ts.c57 * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
61 * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
62 * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
115 udelay(100); in stmpe_work()
/OK3568_Linux_fs/kernel/drivers/base/power/
H A Dtrace.c51 * Giving us a total range of 0-16128000 (0xf61800), ie less
103 time.tm_year = (n % 100); in set_magic_time()
104 n /= 100; in set_magic_time()
129 val = time.tm_year; /* 100 years */ in read_magic_time()
130 if (val > 100) in read_magic_time()
131 val -= 100; in read_magic_time()
132 val += time.tm_mon * 100; /* 12 months */ in read_magic_time()
133 val += (time.tm_mday-1) * 100 * 12; /* 28 month-days */ in read_magic_time()
134 val += time.tm_hour * 100 * 12 * 28; /* 24 hours */ in read_magic_time()
135 val += (time.tm_min / 3) * 100 * 12 * 28 * 24; /* 20 3-minute intervals */ in read_magic_time()
[all …]
/OK3568_Linux_fs/kernel/Documentation/hwmon/
H A Dnsa320.rst36 followed by an 8 bit fan speed in 100s of RPM and a 16 bit temperature in
53 the first clock pulse is reduced from 100 ms to just under 10ms then the chip
55 is reduced from 100 us to less than 15 us then data pulses are likely to be
/OK3568_Linux_fs/kernel/arch/x86/kernel/
H A Dtsc_msr.c25 * is the source clk for a root PLL which outputs 1600 and 100 MHz. It is
31 * clock of 100 MHz plus a quotient which gets us as close to the frequency
33 * For the 83.3 MHz example from above this would give us 100 MHz * 5 / 6 =
80 * 000: 100 * 5 / 6 = 83.3333 MHz
81 * 001: 100 * 1 / 1 = 100.0000 MHz
82 * 010: 100 * 4 / 3 = 133.3333 MHz
83 * 011: 100 * 7 / 6 = 116.6667 MHz
84 * 100: 100 * 4 / 5 = 80.0000 MHz
95 * 0000: 100 * 5 / 6 = 83.3333 MHz
96 * 0001: 100 * 1 / 1 = 100.0000 MHz
[all …]
/OK3568_Linux_fs/external/rkwifibt/drivers/rtl8188fu/core/
H A Drtw_chplan.c26 RTW_RD_2G_FCC1 = 2, /* US */
31 RTW_RD_2G_FCC2 = 7, /* US */
46 RTW_RD_5G_FCC1 = 4, /* US */
52 RTW_RD_5G_FCC7 = 10, /* US, Canada (w/o Weather radar) (w/o Ch120~Ch128) */
53 RTW_RD_5G_IC1 = 11, /* US Canada (w/o Weather radar) */
77 RTW_RD_5G_FCC11 = 35, /* US (include Ch144) */
178 …/* 1, RTW_RD_5G_ETSI1 */ CH_LIST_ENT(19, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,…
179 …/* 2, RTW_RD_5G_ETSI2 */ CH_LIST_ENT(24, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,…
180 …/* 3, RTW_RD_5G_ETSI3 */ CH_LIST_ENT(22, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,…
181 …/* 4, RTW_RD_5G_FCC1 */ CH_LIST_ENT(24, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, …
[all …]
/OK3568_Linux_fs/kernel/drivers/net/wireless/rockchip_wlan/rtl8189fs/core/
H A Drtw_chplan.c28 … {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116…
29 … {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116…
30 …1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116…
39 …/* 0x0B, RTW_CHPLAN_TAIWAN */ {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 56, 60, 64, 100, 104, 108, …
42 …/ {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116…
44 …1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116…
47 …1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116…
56 RTW_RD_2G_FCC1 = 3, /* US */
61 RTW_RD_2G_FCC2 = 8, /* US */
75 RTW_RD_5G_FCC1 = 4, /* US */
[all …]
/OK3568_Linux_fs/kernel/drivers/usb/serial/
H A Dftdi_sio_ids.h77 /* US Interface Navigator (http://www.usinterface.com/) */
251 * The previously included PID for the UO 100 module was incorrect.
252 * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
254 * Armin Laeuger originally sent the PID for the UM 100 module.
260 #define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */
269 #define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */
276 #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
291 #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
292 #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
293 #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
[all …]

12345678910>>...56