usb: r8a66597: Switched from variable to only macro

Some variables are initialized with a value defined by macro.
This was changed to use the macro directly. And the variable not to
use deleted it.

usb: r8a66597: Switched from variable to only macro

Some variables are initialized with a value defined by macro.
This was changed to use the macro directly. And the variable not to
use deleted it.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

show more ...

usb: use linux/usb/ch9.h instead of usbdescriptors.h

Linux usb/ch9.h seems to have all the same information (and more)
as usbdescriptors.h so use the former instead of the later one.

As a consequen

usb: use linux/usb/ch9.h instead of usbdescriptors.h

Linux usb/ch9.h seems to have all the same information (and more)
as usbdescriptors.h so use the former instead of the later one.

As a consequense of this change USB_SPEED_* values don't correspond
directly to EHCI speed encoding anymore, I've added necessary
recoding in EHCI driver. Also there is no point to put speed into
pipe anymore so it's removed and a bunch of host drivers fixed to
look at usb_device->speed instead.

Old usbdescriptors.h included is not removed as it seems to be
used by old USB device code.

This makes usb.h and usbdevice.h incompatible. Fortunately the
only place that tries to include both are the old MUSB code and
it needs usb.h only for USB_DMA_MINALIGN used in aligned attribute
on musb_regs structure but this attribute seems to be unneeded
(old MUSB code doesn't support any DMA at all).

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>

show more ...

ehci-mxc: Fix host power mask bit for i.MX25

The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance
selection bit.

This issue has been reported by Eric Bénard <eric@eukrea.com> a

ehci-mxc: Fix host power mask bit for i.MX25

The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance
selection bit.

This issue has been reported by Eric Bénard <eric@eukrea.com> and fixed by
Christoph Fritz <chf.fritz@googlemail.com> on Linux, from which these #define-s
had been copied.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>

show more ...

ehci-mxc: Fix host power mask bit for i.MX35

The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance
selection bit.

This issue has been reported by Michael Burkey <mdburkey@gmail.

ehci-mxc: Fix host power mask bit for i.MX35

The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance
selection bit.

This issue has been reported by Michael Burkey <mdburkey@gmail.com> and fixed by
Christoph Fritz <chf.fritz@googlemail.com> on Linux, from which these #define-s
had been copied.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>

show more ...

ehci-mx5/6: Make board_ehci_hcd_init() optional

A custom board_ehci_hcd_init() may be unneeded, so add a weak default
implementation doing nothing.

By the way, use simple __weak from linux/compiler

ehci-mx5/6: Make board_ehci_hcd_init() optional

A custom board_ehci_hcd_init() may be unneeded, so add a weak default
implementation doing nothing.

By the way, use simple __weak from linux/compiler.h for
board_ehci_hcd_postinit() instead of weak alias with full attribute.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

show more ...

ehci-mxc: Add support for i.MX35

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

ehci-mxc: Define host offsets

Some MXC SoCs like the i.MX35 have hosts located at unusual offsets, so prepare
to the introduction of i.MX35 support by defining the ehci-mxc hosts offsets at
SoC leve

ehci-mxc: Define host offsets

Some MXC SoCs like the i.MX35 have hosts located at unusual offsets, so prepare
to the introduction of i.MX35 support by defining the ehci-mxc hosts offsets at
SoC level.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

show more ...

ehci-mxc: Make i.MX25 EHCI configurable

Use EHCI MXC configuration options for i.MX25.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano

ehci-mxc: Make i.MX25 EHCI configurable

Use EHCI MXC configuration options for i.MX25.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matthias Weisser <weisserm@arcor.de>

show more ...

ehci-mxc: Make EHCI power/oc polarities configurable

Make EHCI power and overcurrent polarities configurable. If not set, these new
configurartions keep the default register values so that existing

ehci-mxc: Make EHCI power/oc polarities configurable

Make EHCI power and overcurrent polarities configurable. If not set, these new
configurartions keep the default register values so that existing board files
do not have to be changed.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

show more ...

ehci-mx5: Add missing OC_DIS for i.MX53

The i.MX53 has MXC_H*_UCTRL_H*_OC_DIS_BIT bits to disable the oc pin.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <mare

ehci-mx5: Add missing OC_DIS for i.MX53

The i.MX53 has MXC_H*_UCTRL_H*_OC_DIS_BIT bits to disable the oc pin.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

show more ...

ehci-mx5: Fix *PM usage for i.MX53

The MXC_*_UCTRL_*PM_BIT bits are available only on i.MX51.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: S

ehci-mx5: Fix *PM usage for i.MX53

The MXC_*_UCTRL_*PM_BIT bits are available only on i.MX51.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

show more ...

ehci-mx5: Fix OPM usage

MXC_OTG_UCTRL_OPM_BIT disables (masks) the power/oc pins if set, like
MXC_H1_UCTRL_H1PM_BIT and MXC_H2_UCTRL_H2PM_BIT, not the opposite.

Signed-off-by: Benoît Thébaudeau <be

ehci-mx5: Fix OPM usage

MXC_OTG_UCTRL_OPM_BIT disables (masks) the power/oc pins if set, like
MXC_H1_UCTRL_H1PM_BIT and MXC_H2_UCTRL_H2PM_BIT, not the opposite.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

show more ...

ehci-mx5: Fix OC_DIS usage

MXC_OTG_PHYCTRL_OC_DIS_BIT disables the oc pin if set, like MXC_H1_OC_DIS_BIT,
not the opposite.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Mar

ehci-mx5: Fix OC_DIS usage

MXC_OTG_PHYCTRL_OC_DIS_BIT disables the oc pin if set, like MXC_H1_OC_DIS_BIT,
not the opposite.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

show more ...

ehci-mx5: Clean up

Clean up ehci-mx5:
- Fix column alignments.
- Fix comments.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic

ehci-mx5: Clean up

Clean up ehci-mx5:
- Fix column alignments.
- Fix comments.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

show more ...

ehci-mxc: Clean up

Clean up ehci-mxc:
- Remove useless #if's.
- Fix identation.
- Issue a #error if used with an unsupported platform.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advanse

ehci-mxc: Clean up

Clean up ehci-mxc:
- Remove useless #if's.
- Fix identation.
- Issue a #error if used with an unsupported platform.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

show more ...

powerpc/usb: fix bug of CPU hang when missing USB PHY clock

when missing USB PHY clock, u-boot will hang during USB
initialization when issuing "usb start". We should check
USBGP[PHY_CLK_VALID] bit

powerpc/usb: fix bug of CPU hang when missing USB PHY clock

when missing USB PHY clock, u-boot will hang during USB
initialization when issuing "usb start". We should check
USBGP[PHY_CLK_VALID] bit to avoid CPU hanging in this case.

Due to controller issue of PHY_CLK_VALID in ULPI mode, we set
USB_EN before checking PHY_CLK_VALID, otherwise PHY_CLK_VALID
doesn't work.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>

show more ...

dm: Move s3c24xx USB driver to a proper place

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David Müller <d.mueller@elsoft.ch>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>

dm: Move s3c24xx USB driver to a proper place

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David Müller <d.mueller@elsoft.ch>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>

show more ...

mx51: Fix USB PHY clocks

The i.MX51 has a single USB PHY clock, while the i.MX53 has two. These 3 clocks
have different clock gate control bit-fields.

The existing code was correct only for i.MX53,

mx51: Fix USB PHY clocks

The i.MX51 has a single USB PHY clock, while the i.MX53 has two. These 3 clocks
have different clock gate control bit-fields.

The existing code was correct only for i.MX53, so this patch fixes the i.MX51
use case.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Jana Rapava <fermata7@gmail.com>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>

show more ...

usb: ehci: don't print debug output

This is clearly some sort of debug output and should not
be printed during normal operation.

Signed-off-by: Lucas Stach <dev@lynxeye.de>

tegra20: port to new ehci interface

EHCI interface now supports more than one controller. Wire up our usb functions
to use this new interface.

Signed-off-by: Lucas Stach <dev@lynxeye.de>

usb: ehci: rework to take advantage of new lowlevel interface

Kill off ehci-core.h
It was used to specify some static controller data. To support more than
one controller being active at any time we

usb: ehci: rework to take advantage of new lowlevel interface

Kill off ehci-core.h
It was used to specify some static controller data. To support more than
one controller being active at any time we have to carry the controller
data ourselfes. Change the ehci interface accordingly.

NOTE: OMAP implemented the ehci stuff a bit backwards and should be fixed
to do the same thing as other platforms. But the change for now is at least
compile clean.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>

show more ...

usb: lowlevel interface change to support multiple controllers

Carry an index in the lowlevel usb functions to make specify the
respective usb controller.

Also pass through an controller struct fro

usb: lowlevel interface change to support multiple controllers

Carry an index in the lowlevel usb functions to make specify the
respective usb controller.

Also pass through an controller struct from lowlevel_init to the
creation of the root usb device of this controller.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>

show more ...

usb: do explicit unaligned accesses

usb_hub_descriptor has to be packed as it's used for
communication with the device. Member wHubCharacteristics
violates the natural alignment rules.

Use explicit

usb: do explicit unaligned accesses

usb_hub_descriptor has to be packed as it's used for
communication with the device. Member wHubCharacteristics
violates the natural alignment rules.

Use explicit unaligned access functions for this member.
Fixes ARMv7 traping while using USB.

v2: fix typo found by Thomas Langer

v3: rebased on top of u-boot-usb/master

Signed-off-by: Lucas Stach <dev@lynxeye.de>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-usb

* 'master' of git://git.denx.de/u-boot-usb:
MUSB driver: Timeout is never detected as the while loop does not end
usb: fix ulpi_set_vbus pro

Merge branch 'master' of git://git.denx.de/u-boot-usb

* 'master' of git://git.denx.de/u-boot-usb:
MUSB driver: Timeout is never detected as the while loop does not end
usb: fix ulpi_set_vbus prototype
pxa25x: Add UDC registers definitions
USB: Fix strict aliasing in ohci-hcd
usb: Optimize USB storage read/write
ehci: Optimize qTD allocations
usb_stor_BBB_transport: Do not delay when not required
usb_storage: Remove EHCI constraints
usb_storage: Restore non-EHCI support
ehci-hcd: Boost transfer speed
ehci: cosmetic: Define used constants
ehci: Fail for multi-transaction interrupt transfers
arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS
arm:trats: Support for USB UDC driver at TRATS board.
dfu:cmd: Support for DFU u-boot command
dfu: MMC specific routines for DFU operation
dfu: DFU backend implementation
dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
dfu:usb: Support for g_dnl composite download gadget.
ehci: cosmetic: Define the number of qt_buffers

Signed-off-by: Wolfgang Denk <wd@denx.de>

show more ...

USB: Fix strict aliasing in ohci-hcd

commit 5f6aa03fda2a0a79940765865c1e4266be8a75f8
USB: Fix complaints about strict aliasing in OHCI-HCD

tried to fix this, but gcc4.4 still complains. So, thi

USB: Fix strict aliasing in ohci-hcd

commit 5f6aa03fda2a0a79940765865c1e4266be8a75f8
USB: Fix complaints about strict aliasing in OHCI-HCD

tried to fix this, but gcc4.4 still complains. So, this
patch basically reverts the above and does a simpler fix.

also, the above commit incorrectly changed
/* corresponds to data_buf[4-7] */
datab [1] = 0;
to

/* corresponds to databuf.u8[4-7] */
databuf.u8[1] = 0;

This patch also fixes that.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

show more ...