rockchip: rk3399: add stopwatch functions to m0

There is system timer in m0, we can use it to implement a set of
stopwatch functions for measuring timeouts.

Signed-off-by: Lin Huang <hl@rock-chips.

rockchip: rk3399: add stopwatch functions to m0

There is system timer in m0, we can use it to implement a set of
stopwatch functions for measuring timeouts.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

show more ...

rockchip: rk3399: dram: set all ddr frequency pll_postdiv values to 0

The phy pll needs to get 2X frequency to the DDR, so set the
pll_postdiv to 0.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Sig

rockchip: rk3399: dram: set all ddr frequency pll_postdiv values to 0

The phy pll needs to get 2X frequency to the DDR, so set the
pll_postdiv to 0.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

show more ...

rockchip: rk3399: enable CA training when do ddr dfs

For ddr dfs stable, We need to enable ddr CA training
when do ddr dfs.

Signed-off-by: Lin Huang <hl@rock-chips.com>

rockchip: rk3399: fix hang in ddr set rate

This fixes a hang with setting the DRAM rate based on a race condition
with the M0 which sets the DRAM rate. The AP can also starve the M0,
so this also de

rockchip: rk3399: fix hang in ddr set rate

This fixes a hang with setting the DRAM rate based on a race condition
with the M0 which sets the DRAM rate. The AP can also starve the M0,
so this also delays the AP reads to the DONE parameter for the M0.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>

show more ...

rockchip: rk3399: Enable per CS training at 666MHz

This enables per CS training at 666MHz and above for ddrfreq per
vendor recommendation. Since the threshold was used for latency was
the same value

rockchip: rk3399: Enable per CS training at 666MHz

This enables per CS training at 666MHz and above for ddrfreq per
vendor recommendation. Since the threshold was used for latency was
the same value, this also adds a new value for that.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>

show more ...

rockchip: rk3399: add support for ddrfreq suspend/resume

This patch sets the frequency configuration of the next DRAM DFS index
to the configuration of the current index. This does not perform a
fre

rockchip: rk3399: add support for ddrfreq suspend/resume

This patch sets the frequency configuration of the next DRAM DFS index
to the configuration of the current index. This does not perform a
frequency transition. It just configures registers so the training on
resume for both indices will be correct.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>

show more ...

rk3399: dram: use PMU M0 to do ddr frequency scaling

We used dcf do ddr frequency scaling, but we just include a dcf
binary, it hard to maintain later, we have M0 compile flow in ATF,
and M0 can als

rk3399: dram: use PMU M0 to do ddr frequency scaling

We used dcf do ddr frequency scaling, but we just include a dcf
binary, it hard to maintain later, we have M0 compile flow in ATF,
and M0 can also work for ddr frequency scaling, so let's use it.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>

show more ...

rockchip/rk3399: Cleanup platform.mk file

This makes the file consistently use tabs instead of mixing in spaces.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>

rockchip: update the raw read/write APIs for M0

Since the ATF project, we usually use the mmio_read_32 and
mmio_write_32. And the mmio_write_32, the firse parameter
is ADDR, the second is VALUE. In

rockchip: update the raw read/write APIs for M0

Since the ATF project, we usually use the mmio_read_32 and
mmio_write_32. And the mmio_write_32, the firse parameter
is ADDR, the second is VALUE. In order to style consistency:

1/ rename readl/writel to mmio_read_32/mmio_write_32
2/ for keeping the same with mmio_write_32 in the ATF project,
swap the order of the parameters for M0 mmio_write_32

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>

show more ...

rk3399: dram: making phy into dll bypass mode at low frequency

when dram frequency below 260MHz, phy master dll may unlock, so
let phy master dll working at dll bypass mode when frequency is
below 2

rk3399: dram: making phy into dll bypass mode at low frequency

when dram frequency below 260MHz, phy master dll may unlock, so
let phy master dll working at dll bypass mode when frequency is
below 260MHz.

Signed-off-by: Lin Huang <hl@rock-chips.com>

show more ...

rockchip: rk3399: dram: remove dram_init and dts_timing_receive function

we can reuse the dram config from loader, so we can remove dram_init()
and dts_timing_receive() funciton in dram.c, add the d

rockchip: rk3399: dram: remove dram_init and dts_timing_receive function

we can reuse the dram config from loader, so we can remove dram_init()
and dts_timing_receive() funciton in dram.c, add the dram_set_odt_pd()
function to get the odt and auto power down parameter from kernel.

This also removes the dcf_code_init function to allow the system to
actually boot.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>

show more ...

Tegra: implement pwr_domain_pwr_down_wfi() handler

This patch adds the pwr_domain_power_down_wfi() handler for Tegra
platforms which in turn executes the soc specific `power_down_wfi`
handler.

Chan

Tegra: implement pwr_domain_pwr_down_wfi() handler

This patch adds the pwr_domain_power_down_wfi() handler for Tegra
platforms which in turn executes the soc specific `power_down_wfi`
handler.

Change-Id: I5deecc09959db3c3d73f928f5c871966331cfd95
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: memmap BL31's TZDRAM carveout

This patch maps the TZDRAM carveout used by the BL31. In the near
future BL31 would be running from the TZRAM for security and
performance reasons. The only down

Tegra: memmap BL31's TZDRAM carveout

This patch maps the TZDRAM carveout used by the BL31. In the near
future BL31 would be running from the TZRAM for security and
performance reasons. The only downside to this solution is that
the TZRAM loses its state in System Suspend. So, we map the TZDRAM
carveout that the BL31 would use to save its state before entering
System Suspend.

Change-Id: Id5bda7e9864afd270cf86418c703fa61c2cb095f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: increase BL31 image size to 256KB

This patch increases the BL31 image size for all Tegra platforms to
256KB, so that we can relocate BL31 to TZSRAM on supported chips.

Change-Id: I467063c686

Tegra: increase BL31 image size to 256KB

This patch increases the BL31 image size for all Tegra platforms to
256KB, so that we can relocate BL31 to TZSRAM on supported chips.

Change-Id: I467063c68632b53b5d4ef8ff1f76f5988096bd9c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: allow individual SoCs to restore their settings

This patch uses the Memory controller driver's handler to restore
its settings and moves the other chip specific code to their own
'pwr_domain_

Tegra: allow individual SoCs to restore their settings

This patch uses the Memory controller driver's handler to restore
its settings and moves the other chip specific code to their own
'pwr_domain_on_finish' handlers.

Change-Id: I3c9d23bdab9e2e3c05034ff6812cf941ccd7a75e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

cpus: denver: disable DCO operations from platform code

This patch moves the code to disable DCO operations out from common
CPU files. This allows the platform code to call thsi API as and
when requ

cpus: denver: disable DCO operations from platform code

This patch moves the code to disable DCO operations out from common
CPU files. This allows the platform code to call thsi API as and
when required. There are certain CPU power down states which require
the DCO to be kept ON and platforms can decide selectively now.

Change-Id: Icb946fe2545a7d8c5903c420d1ee169c4921a2d1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: enable PSCI extended state ID processing

This patch enables the PSCI_EXTENDED_STATE_ID macro. Tegra platforms
have moved on to using the extended state ID for CPU_SUSPEND, where
the NS world

Tegra: enable PSCI extended state ID processing

This patch enables the PSCI_EXTENDED_STATE_ID macro. Tegra platforms
have moved on to using the extended state ID for CPU_SUSPEND, where
the NS world passes the state ID and wakeup time as part of the
state ID field.

Change-Id: Ie8b0fec285d8b2330bc26ff239a4f628425c9fcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: define platform power states

The platform power states, PLAT_MAX_RET_STATE and PLAT_MAX_OFF_STATE,
can change on Tegra SoCs and so should be defined per-soc.

This patch moves these macro def

Tegra: define platform power states

The platform power states, PLAT_MAX_RET_STATE and PLAT_MAX_OFF_STATE,
can change on Tegra SoCs and so should be defined per-soc.

This patch moves these macro definitions to individual SoC's tegra_def.h
files.

Change-Id: Ib9b2752bc4d79cef6f79bee49882d340f71977a2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: drivers: memctrl: introduce function to secure on-chip TZRAM

This patch introduces a function to secure the on-chip TZRAM memory. The
Tegra132 and Tegra210 chips do not have a compelling use

Tegra: drivers: memctrl: introduce function to secure on-chip TZRAM

This patch introduces a function to secure the on-chip TZRAM memory. The
Tegra132 and Tegra210 chips do not have a compelling use case to lock the
TZRAM. The trusted OS owns the TZRAM aperture on these chips and so it
can take care of locking the aperture. This might not be true for future
chips and this patch makes the TZRAM programming flexible.

Change-Id: I3ac9f1de1b792ccd23d4ded274784bbab2ea224a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: enable runtime console

This patch enables the runtime console for all Tegra platforms
before exiting BL31. This would enable debug/error prints to be
always displayed on the UART console.

Ch

Tegra: enable runtime console

This patch enables the runtime console for all Tegra platforms
before exiting BL31. This would enable debug/error prints to be
always displayed on the UART console.

Change-Id: Ic48d61d05b0ab07973d6fc2dc6b68733a42a3f63
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: PM: soc-specific system off handler

This patch introduces a power down handler which can be overriden
by SoCs to customise the power down process. The current SoCs do
not have a way of poweri

Tegra: PM: soc-specific system off handler

This patch introduces a power down handler which can be overriden
by SoCs to customise the power down process. The current SoCs do
not have a way of powering down the entire system as external PMIC
chips are involved in the process.

But future SoCs will have a way to power off the entire system
without talking to an external PMIC.

Change-Id: Ie7750714141a29cb0a1a616fafc531c4f11d0985
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: handlers for common and SoC-specific SiP calls

This patch implements a handler for common SiP calls. A weak
implementation for the SoC-specific handler has been provided
which can be overridd

Tegra: handlers for common and SoC-specific SiP calls

This patch implements a handler for common SiP calls. A weak
implementation for the SoC-specific handler has been provided
which can be overridden by SoCs to implement any custom SiP
calls.

Change-Id: I45122892a84ea35d7b44be0f35dc15f6bb95193e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

spd: trusty: OEN_TAP_START aperture for standard calls

This patch uses the OEN_TAP_START aperture for all the standard
calls being passed to Trusty.

Change-Id: Id78d01c7f48e4f54855600d7c789ffbfb898

spd: trusty: OEN_TAP_START aperture for standard calls

This patch uses the OEN_TAP_START aperture for all the standard
calls being passed to Trusty.

Change-Id: Id78d01c7f48e4f54855600d7c789ffbfb898c541
Signed-off-by: Amith <aramachan@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Merge pull request #845 from vwadekar/tegra-changes-from-downstream-v1

Tegra changes from downstream v1

Clarify errata ERRATA_A53_836870 documentation

The errata is enabled by default on r0p4, which is confusing given that
we state we do not enable errata by default.

This patch clarifies this sentenc

Clarify errata ERRATA_A53_836870 documentation

The errata is enabled by default on r0p4, which is confusing given that
we state we do not enable errata by default.

This patch clarifies this sentence by saying it is enabled in hardware
by default.

Change-Id: I70a062d93e1da2416d5f6d5776a77a659da737aa
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

show more ...