plat: marvell: armada: Maximal size of bl1 image in mrvl_bootimage is 128kB

Add check when building mrvl_bootimage that size of bl1 image is not bigger
than maximal size.

Signed-off-by: Pali Rohár

plat: marvell: armada: Maximal size of bl1 image in mrvl_bootimage is 128kB

Add check when building mrvl_bootimage that size of bl1 image is not bigger
than maximal size.

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ib873debd3cfdba9acd4c168ee37edab3032e9f25

show more ...

plat: marvell: armada: Add missing FORCE, .PHONY and clean targets

FORCE target is used as a dependency for other file targets which needs to
be always rebuilt. .PHONY target is standard Makefile ta

plat: marvell: armada: Add missing FORCE, .PHONY and clean targets

FORCE target is used as a dependency for other file targets which needs to
be always rebuilt. .PHONY target is standard Makefile target which specify
non-file targets and therefore needs to be always rebuilt.

Targets clean, realclean and distclean are .PHONY targets used to remove
built files. Correctly set that mrvl_clean target is prerequisite for these
clean targets to ensure that built files are removed.

Finally this change with usage of FORCE target allows to remove mrvl_clean
hack from the prerequisites of a8k ${DOIMAGETOOL} target which was used
just to ensure that ${DOIMAGETOOL} is always rebuilt via make subprocess.

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I2fa8971244b43f101d846fc433ef7b0b6f139c92

show more ...

plat: marvell: armada: Add new target mrvl_bootimage

This new target builds boot-image.bin binary as described in documentation.
This image does not contain WTMI image and therefore WTP repository i

plat: marvell: armada: Add new target mrvl_bootimage

This new target builds boot-image.bin binary as described in documentation.
This image does not contain WTMI image and therefore WTP repository is not
required for building.

Having ability to build just this boot-image.bin binary without full
flash-image.bin is useful for A3720 Turris MOX board which does not use
Marvell's WTP and a3700_utils.

To reduce duplicity between a8k and a3k code, define this new target and
also definitions for $(BUILD_PLAT)/$(BOOT_IMAGE) in common include file
marvell_common.mk.

For this purpose it is needed to include plat/marvell/marvell.mk file from
a3700_common.mk unconditionally (and not only when WTP is defined). Now
when common file plat/marvell/marvell.mk does not contain definition for
building $(DOIMAGETOOL), it is possible to move its inclusion at the top of
the a3700_common.mk file.

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic58303b37a1601be9a06ff83b7a279cb7cfc8280

show more ...

Merge "plat: marvell: armada: Fix dependences for target fip" into integration

Merge changes I5ae9d08b,I5cbbd7eb,Idb389223 into integration

* changes:
plat: marvell: armada: Building ${DOIMAGETOOL} is only for a8k
plat: marvell: armada: Fix including plat/marvell/marvell.m

Merge changes I5ae9d08b,I5cbbd7eb,Idb389223 into integration

* changes:
plat: marvell: armada: Building ${DOIMAGETOOL} is only for a8k
plat: marvell: armada: Fix including plat/marvell/marvell.mk file
plat: marvell: armada: a3k: When WTP is empty do not define variables and targets which depends on it

show more ...

plat: marvell: armada: Fix including plat/marvell/marvell.mk file

Include file plat/marvell/marvell.mk for platform A3700 was included two
times. Once from file plat/marvell/armada/a3k/common/a3700_

plat: marvell: armada: Fix including plat/marvell/marvell.mk file

Include file plat/marvell/marvell.mk for platform A3700 was included two
times. Once from file plat/marvell/armada/a3k/common/a3700_common.mk and
second time from common file plat/marvell/armada/common/marvell_common.mk.

It caused following warning every time was make called:

plat/marvell/marvell.mk:51: warning: overriding recipe for target 'mrvl_clean'
plat/marvell/marvell.mk:51: warning: ignoring old recipe for target 'mrvl_clean'

Change in this commit removes inclusion of plat/marvell/marvell.mk file in
common file plat/marvell/armada/common/marvell_common.mk. As a80x0 platform
needs this include file, add it also into a80x0 platform specific include
file lat/marvell/armada/a8k/common/a8k_common.mk.

Also moves inclusion of plat/marvell/marvell.mk file in a3700 platform file
plat/marvell/armada/a3k/common/a3700_common.mk at correct place. Global
plat/marvell/marvell.mk expects that variables DOIMAGEPATH and DOIMAGETOOL
are already defined, but it defines MARVELL_SECURE_BOOT variable which is
needed by plat/marvell/armada/a3k/common/a3700_common.mk.

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5cbbd7eb8a3376924419f9850516b2a4924be5aa

show more ...

plat: marvell: armada: Fix dependences for target fip

For building fip image it is not needed to build target mrvl_flash. This
fip image contains only bl2, bl31 and bl33 (u-boot.bin) images and
ther

plat: marvell: armada: Fix dependences for target fip

For building fip image it is not needed to build target mrvl_flash. This
fip image contains only bl2, bl31 and bl33 (u-boot.bin) images and
therefore it does not depend on Marvell wtmi and wtp A3700-utils.

So remove mrvl_flash dependency for fip target to allow building fip image
without need to build mrvl_flash and therefore specify and provide Marvell
wmi and wtp A3700-utils.

This changes fixes compilation of fip image for A3700 platform by command:

make CROSS_COMPILE=aarch64-linux-gnu- BL33=/path/u-boot/u-boot.bin \
DEBUG=0 LOG_LEVEL=0 USE_COHERENT_MEM=0 PLAT=a3700 fip

Marvell boot image can be still build by 'mrvl_flash' target.

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iba9a9da5be6fd1da23407fc2d490aedcb1a292c9

show more ...

Don't return error information from console_flush

And from crash_console_flush.

We ignore the error information return by console_flush in _every_
place where we call it, and casting the return typ

Don't return error information from console_flush

And from crash_console_flush.

We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.

Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

show more ...

plat: marvell: armada: fix BL32 extra parameters usage

Update missing code releated to the BL32 payload.

Change-Id: I5cbe71921467c53c45be5510f950cefdacc110e1
Signed-off-by: Marcin Wojtas <mw@semiha

plat: marvell: armada: fix BL32 extra parameters usage

Update missing code releated to the BL32 payload.

Change-Id: I5cbe71921467c53c45be5510f950cefdacc110e1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

show more ...

plat: marvell: armada: a8k: change CCU LLC SRAM mapping

The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
unt

plat: marvell: armada: a8k: change CCU LLC SRAM mapping

The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
until the SRAM is actually enabled.
This patch changes CCU SRAM window target to DRAM-0
Remove dependence between LLC_SRAM and LLC_ENABLE and update the
build documentation.
The SRAМ base moved to follow the OP-TEE SHMEM area (0x05400000)

Change-Id: I85c2434a3d515ec37da5ae8eb729e3280f91c456
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

show more ...

plat: marvell: armada: move mg conf related code to appropriate driver

Now when mg_conf_cm3 driver is present - move all relevant code there.

Change-Id: I444d9e877c450d6ee69ca3a49b547e4c3aeac0be
Si

plat: marvell: armada: move mg conf related code to appropriate driver

Now when mg_conf_cm3 driver is present - move all relevant code there.

Change-Id: I444d9e877c450d6ee69ca3a49b547e4c3aeac0be
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

show more ...

drivers: marvell: add support for mapping the entire LLC to SRAM

Add llc_sram_enable() and llc_sram_disable() APIs to Marvell
cache_lls driver.
Add LLC_SRAM definition to Marvell common makefile - d

drivers: marvell: add support for mapping the entire LLC to SRAM

Add llc_sram_enable() and llc_sram_disable() APIs to Marvell
cache_lls driver.
Add LLC_SRAM definition to Marvell common makefile - disabled
by the default.
Add description of LLC_SRAM flag to the build documentation.

Change-Id: Ib348e09752ce1206d29268ef96c9018b781db182
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

show more ...

drivers: marvell: align and extend llc macros

Make all LLC-related macros to start with the same prefix
Add more LLC control registers definitions
This patch is a preparation step for LLC SRAM suppo

drivers: marvell: align and extend llc macros

Make all LLC-related macros to start with the same prefix
Add more LLC control registers definitions
This patch is a preparation step for LLC SRAM support

Change-Id: I0a4f0fc83e8ef35be93dd239a85f2a9f88d1ab19
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

show more ...

plat: marvell: armada: make a8k_common.mk and mss_common.mk more generic

As a preparation for upcoming support for CN9130 platform, which is
classified as OcteonTx2 product but inherits functionalit

plat: marvell: armada: make a8k_common.mk and mss_common.mk more generic

As a preparation for upcoming support for CN9130 platform, which is
classified as OcteonTx2 product but inherits functionality from a8k,
allow to use a8k_common.mk and mss_common.mk from outside of
PLAT_FAMILY_BASE.
Above is done by introducing BOARD_DIR which needs to be set by each
platform, before including a8k_common.mk and mss_common.mk. This will
allow to use mentioned mk files not only for platforms located under
previously defined PLAT_FAMILY_BASE.

Change-Id: I22356c99bc0419a40ae11e42f37acd50943ea134
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

show more ...

marvell: armada: add extra level in marvell platform hierarchy

This commit is a preparation for upcoming support for OcteonTX and
OcteonTX2 product families. Armada platform related files (docs,
pla

marvell: armada: add extra level in marvell platform hierarchy

This commit is a preparation for upcoming support for OcteonTX and
OcteonTX2 product families. Armada platform related files (docs,
plat, include/plat) are moved to the new "armada" sub-folder.

Change-Id: Icf03356187078ad6a2e56c9870992be3ca4c9655
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

show more ...