arm: dts: rk3288: add adc-keys dt node

Add adc-keys for download mode detection.

Change-Id: I8f3204bc716c7e06fde07f9f1c6f926767214c4b
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

rockchip: dts: px30: enable pmucru in pre-reloc

We will add a pmucru driver for handling some clocks, such as
PLL_GPLL and PCLK_PMU.

Change-Id: I8fb8979b02c4f3a7c4a6a4d6f20a5ed1bb11dd8d
Signed-off-

rockchip: dts: px30: enable pmucru in pre-reloc

We will add a pmucru driver for handling some clocks, such as
PLL_GPLL and PCLK_PMU.

Change-Id: I8fb8979b02c4f3a7c4a6a4d6f20a5ed1bb11dd8d
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

show more ...

rockchip: dts: rv1108-evb: add mipi display support

Add lcd-e555hbm2-mipi display support for show logo
on RK_MINIEVB_RV1108_V10.

Change-Id: I1eb61a2977d68679835697e5400dbfb1f57bd70e
Signed-off-by:

rockchip: dts: rv1108-evb: add mipi display support

Add lcd-e555hbm2-mipi display support for show logo
on RK_MINIEVB_RV1108_V10.

Change-Id: I1eb61a2977d68679835697e5400dbfb1f57bd70e
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

show more ...

rockchip: dts: rv1108: Add vop and mipi mipi-dphy node

Change-Id: Ifa31422f96e98e47ca4857bf8bdee52c0756ca91
Signed-off-by: Sandy Huang <hjc@rock-chips.com>

arm: dts: rv1108: Add pwm0 node support

Change-Id: Id0bb2776abd70eaabff21bf6af950ef11bcf37cd
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

arm: dts: evb_rv1108: add adc-keys dt node

Add adc-keys for download mode detection.

Change-Id: Id38b7b716fe742c182cceb6921cd23b20c6e6e8e
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

rockchip: rv1108: switch to rksfc

rksfc will emulate the spi nor flash as a block
device, then we can access it via gpt partition.

Change-Id: Idc9bb2532d8fcc82af03f451735a487ef22abe00
Signed-off-by

rockchip: rv1108: switch to rksfc

rksfc will emulate the spi nor flash as a block
device, then we can access it via gpt partition.

Change-Id: Idc9bb2532d8fcc82af03f451735a487ef22abe00
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

show more ...

arm: rv1108: support rk805 setting voltage

add rk805 and i2c dts node.
support rk805 i2c read and write.

Change-Id: I74d6a9f6ff5609ebdbc1a272cd044fdaa7041d7f
Signed-off-by: Elaine Zhang <zhangqing@

arm: rv1108: support rk805 setting voltage

add rk805 and i2c dts node.
support rk805 i2c read and write.

Change-Id: I74d6a9f6ff5609ebdbc1a272cd044fdaa7041d7f
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

show more ...

clk: rockchip: rv1108: Make clock ids consistent with kernel

Change-Id: Idd295c633dffbe2ed6c3f5b6e115b0fd5b040251
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

rockchip: dts: rv1108: delete property of usbgrf

Delete property of usbgrf to make the driver use grf to
refrence the base address only.

Change-Id: I4601f6d263595eeabd861e5e01230bd8411bae83
Signed-

rockchip: dts: rv1108: delete property of usbgrf

Delete property of usbgrf to make the driver use grf to
refrence the base address only.

Change-Id: I4601f6d263595eeabd861e5e01230bd8411bae83
Signed-off-by: MengDongyang <daniel.meng@rock-chips.com>

show more ...

rockchip: dts: rv1108: correct the reference of u2phy

The reference of u2phy should be OTG port or host port in
the DT node of USB controller. Because the phy ops is bind
to each port or u2phy. So i

rockchip: dts: rv1108: correct the reference of u2phy

The reference of u2phy should be OTG port or host port in
the DT node of USB controller. Because the phy ops is bind
to each port or u2phy. So it will result in a NULL point if
we use the parent DT node as reference. This patch change
<&u2phy 1> to <&u2phy_otg> and <&u2phy_host> to solve this
problem.

Change-Id: I7e8fc5fcdeb1ce188c857bb3c5caa23aa713988e
Signed-off-by: MengDongyang <daniel.meng@rock-chips.com>

show more ...

rockchip: dts: update rk3399 drm display node

This has been test in rk3399-execavator board with edp panel.

Change-Id: I6ad5176c305883a037f6571623b5f6f754a8f6c1
Signed-off-by: Kever Yang <kever.yan

rockchip: dts: update rk3399 drm display node

This has been test in rk3399-execavator board with edp panel.

Change-Id: I6ad5176c305883a037f6571623b5f6f754a8f6c1
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

show more ...

Revert "rockchip: dts: px30: enable saradc in pre-reloc"

This reverts commit 73f99ea810566e73bfb31c7196ce303b098c8260.

There is something wrong with saradc clk after reloc, and saradc
doesn't work.

Revert "rockchip: dts: px30: enable saradc in pre-reloc"

This reverts commit 73f99ea810566e73bfb31c7196ce303b098c8260.

There is something wrong with saradc clk after reloc, and saradc
doesn't work. we don't find the root cause, so revert it temporary.

Change-Id: Ica8b61225ffbd3578860b03faa4b0f2b13f77584

show more ...

rockchip: dts: rk3399 use -u-boot.dtsi for rk3399

Move u-boot config into rk3399-u-boot.dtsi

Change-Id: Ia3cb1ecc379c62f2e071947e308e29038bfffbea
Signed-off-by: Kever Yang <kever.yang@rock-chips.co

rockchip: dts: rk3399 use -u-boot.dtsi for rk3399

Move u-boot config into rk3399-u-boot.dtsi

Change-Id: Ia3cb1ecc379c62f2e071947e308e29038bfffbea
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

show more ...

rockchip: dts: rk3399: disable pmic/vop in pre-reloc

We do not enable pmic and vop in pre-reloc, so we don't use
then in SPL and pre-reloc stage in U-Boot with kernel dtb enabled.

Change-Id: I33890

rockchip: dts: rk3399: disable pmic/vop in pre-reloc

We do not enable pmic and vop in pre-reloc, so we don't use
then in SPL and pre-reloc stage in U-Boot with kernel dtb enabled.

Change-Id: I3389069c117996864d2d030bfc5443e91f02314e
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

show more ...

rockchip: add px3se evb board

Add px3se evb board defconfig and dts.

Change-Id: Ibd28b8ff74facf14209b3c563e2ee437226bd525
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>

rockchip: dts: rk312x: Enable uart2 in dts instead of dtsi

In most of case, uart2 is the cpu debug port, but there are boards
that use the other uart as debug port.

Enable uart2 is the job of speci

rockchip: dts: rk312x: Enable uart2 in dts instead of dtsi

In most of case, uart2 is the cpu debug port, but there are boards
that use the other uart as debug port.

Enable uart2 is the job of specify dts, so moving it from
rk3128-u-boot.dtsi.

Change-Id: I9c2d071bf9edc18eef4c5753e69f769a3bbc0d7f
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>

show more ...

Revert "rockchip: add px3se evb board support"

Another px3se evb dts/config will upload instead.

This reverts commit a5c82e2bba8b66cfb14dc945c7f97dddec92542c.

Change-Id: Iad3878b1cb1feb032c14252a9

Revert "rockchip: add px3se evb board support"

Another px3se evb dts/config will upload instead.

This reverts commit a5c82e2bba8b66cfb14dc945c7f97dddec92542c.

Change-Id: Iad3878b1cb1feb032c14252a90a59fc3070dafff
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>

show more ...

rockchip: add px3se evb board support

Change-Id: If1ab2bc8f166833ea882a0d4d134eb5c05151462
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>

rockchip: px30: enable all gpio in pre-reloc

support muilt dtb dynamically loading by gpio value,
set status disabled, we just want its property.

Change-Id: Ic636c9f42e5e3bc134e29f06d124644b7e5a334

rockchip: px30: enable all gpio in pre-reloc

support muilt dtb dynamically loading by gpio value,
set status disabled, we just want its property.

Change-Id: Ic636c9f42e5e3bc134e29f06d124644b7e5a3349
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>

show more ...

rockchip: dts: px30: enable saradc in pre-reloc

support multi dtb dynamically loading by adc value.

Change-Id: I12ec2a32e4055c2ccfc999d7ab3b3d209db12242
Signed-off-by: Joseph Chen <chenjh@rock-chip

rockchip: dts: px30: enable saradc in pre-reloc

support multi dtb dynamically loading by adc value.

Change-Id: I12ec2a32e4055c2ccfc999d7ab3b3d209db12242
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>

show more ...

arm: rockchip: rk3308: add sfc node for rk3308

Change-Id: I66524230fd5a460aebafe1878154673770510b86
Signed-off-by: Dingqiang Lin <jon.lin@rock-chips.com>

arm: dts: rockchip: add display demo for rk3308 evb

Change-Id: Ie1edd2bdc10a11fbce264b6508d69bcfe567cc44
Signed-off-by: Sandy Huang <hjc@rock-chips.com>

rockchip: px30: add sdmmc support

Sync the sdmmc related dts node from kernel.

Change-Id: I1fad10f9c38e566eb8276eca9777570c85e02063
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

rockchip: rk3188: add -u-boot.dtsi for rock-rk3188

We should a -u-boot.dtsi for those config need by U-Boot only,
and other part sync with kernel.

Change-Id: I7c9f9c2824b759bcfd7e5c137ca0da207443d5

rockchip: rk3188: add -u-boot.dtsi for rock-rk3188

We should a -u-boot.dtsi for those config need by U-Boot only,
and other part sync with kernel.

Change-Id: I7c9f9c2824b759bcfd7e5c137ca0da207443d553
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

show more ...