feat(tc): enable MPMM

This change enables MPMM and adds, to the TC firmware configuration
device tree, the AMU counters representing the "gears" for the
Maximum Power Mitigation Mechanism feature of

feat(tc): enable MPMM

This change enables MPMM and adds, to the TC firmware configuration
device tree, the AMU counters representing the "gears" for the
Maximum Power Mitigation Mechanism feature of the Cortex-X2,
Cortex-A710 and Cortex-A510:

- Gear 0: throttle medium and high bandwidth vector and viruses.
- Gear 1: throttle high bandwidth vector and viruses.
- Gear 2: throttle power viruses only.

This ensures these counters are enabled and context-switched as
expected.

Change-Id: I6df6e0fe3a5362861aa967a78ab7c34fc4bb8fc3
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

feat(mpmm): add support for MPMM

MPMM - the Maximum Power Mitigation Mechanism - is an optional
microarchitectural feature present on some Armv9-A cores, introduced
with the Cortex-X2, Cortex-A710 a

feat(mpmm): add support for MPMM

MPMM - the Maximum Power Mitigation Mechanism - is an optional
microarchitectural feature present on some Armv9-A cores, introduced
with the Cortex-X2, Cortex-A710 and Cortex-A510 cores.

MPMM allows the SoC firmware to detect and limit high activity events
to assist in SoC processor power domain dynamic power budgeting and
limit the triggering of whole-rail (i.e. clock chopping) responses to
overcurrent conditions.

This feature is enabled via the `ENABLE_MPMM` build option.
Configuration can be done via FCONF by enabling `ENABLE_MPMM_FCONF`, or
by via the plaform-implemented `plat_mpmm_topology` function.

Change-Id: I77da82808ad4744ece8263f0bf215c5a091c3167
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

feat(amu): enable per-core AMU auxiliary counters

This change makes AMU auxiliary counters configurable on a per-core
basis, controlled by `ENABLE_AMU_AUXILIARY_COUNTERS`.

Auxiliary counters can be

feat(amu): enable per-core AMU auxiliary counters

This change makes AMU auxiliary counters configurable on a per-core
basis, controlled by `ENABLE_AMU_AUXILIARY_COUNTERS`.

Auxiliary counters can be described via the `HW_CONFIG` device tree if
the `ENABLE_AMU_FCONF` build option is enabled, or the platform must
otherwise implement the `plat_amu_topology` function.

A new phandle property for `cpu` nodes (`amu`) has been introduced to
the `HW_CONFIG` specification to allow CPUs to describe the view of
their own AMU:

```
cpu0: cpu@0 {
...

amu = <&cpu0_amu>;
};
```

Multiple cores may share an `amu` handle if they implement the
same set of auxiliary counters.

AMU counters are described for one or more AMUs through the use of a new
`amus` node:

```
amus {
cpu0_amu: amu-0 {
#address-cells = <1>;
#size-cells = <0>;

counter@0 {
reg = <0>;

enable-at-el3;
};

counter@n {
reg = <n>;

...
};
};
};
```

This structure describes the **auxiliary** (group 1) AMU counters.
Architected counters have architecturally-defined behaviour, and as
such do not require DTB entries.

These `counter` nodes support two properties:

- The `reg` property represents the counter register index.
- The presence of the `enable-at-el3` property determines whether
the firmware should enable the counter prior to exiting EL3.

Change-Id: Ie43aee010518c5725a3b338a4899b0857caf4c28
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

docs(amu): add AMU documentation

This change adds some documentation on the AMU and its purpose. This is
expanded on in later patches.

Change-Id: If2834676790938d8da5ea2ceba37b674f6cc0f01
Signed-of

docs(amu): add AMU documentation

This change adds some documentation on the AMU and its purpose. This is
expanded on in later patches.

Change-Id: If2834676790938d8da5ea2ceba37b674f6cc0f01
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

refactor(amu): refactor enablement and context switching

This change represents a general refactoring to clean up old code that
has been adapted to account for changes required to enable dynamic
aux

refactor(amu): refactor enablement and context switching

This change represents a general refactoring to clean up old code that
has been adapted to account for changes required to enable dynamic
auxiliary counters.

Change-Id: Ia85e0518f3f65c765f07b34b67744fc869b9070d
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

refactor(amu): detect auxiliary counters at runtime

This change decouples the group 1 counter macros to facilitate dynamic
detection at runtime. These counters remain disabled - we will add
dynamic

refactor(amu): detect auxiliary counters at runtime

This change decouples the group 1 counter macros to facilitate dynamic
detection at runtime. These counters remain disabled - we will add
dynamic enablement of them in a later patch.

Change-Id: I820d05f228d440643bdfa308d030bd51ebc0b35a
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

refactor(amu): detect architected counters at runtime

This change removes the `AMU_GROUP0_COUNTERS_MASK` and
`AMU_GROUP0_MAX_COUNTERS` preprocessor definitions, instead retrieving
the number of grou

refactor(amu): detect architected counters at runtime

This change removes the `AMU_GROUP0_COUNTERS_MASK` and
`AMU_GROUP0_MAX_COUNTERS` preprocessor definitions, instead retrieving
the number of group 0 counters dynamically through `AMCGCR_EL0.CG0NC`.

Change-Id: I70e39c30fbd5df89b214276fac79cc8758a89f72
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

refactor(amu): conditionally compile auxiliary counter support

This change reduces preprocessor dependencies on the
`AMU_GROUP1_NR_COUNTERS` and `AMU_GROUP1_COUNTERS_MASK` definitions, as
these valu

refactor(amu): conditionally compile auxiliary counter support

This change reduces preprocessor dependencies on the
`AMU_GROUP1_NR_COUNTERS` and `AMU_GROUP1_COUNTERS_MASK` definitions, as
these values will eventually be discovered dynamically.

In their stead, we introduce the `ENABLE_AMU_AUXILIARY_COUNTERS` build
option, which will enable support for dynamically detecting and
enabling auxiliary AMU counters.

This substantially reduces the amount of memory used by platforms that
know ahead of time that they do not have any auxiliary AMU counters.

Change-Id: I3d998aff44ed5489af4857e337e97634d06e3ea1
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

refactor(amu): factor out register accesses

This change introduces a small set of register getters and setters to
avoid having to repeatedly mask and shift in complex code.

Change-Id: Ia372f60c5efb

refactor(amu): factor out register accesses

This change introduces a small set of register getters and setters to
avoid having to repeatedly mask and shift in complex code.

Change-Id: Ia372f60c5efb924cd6eeceb75112e635ad13d942
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

refactor(amu)!: privatize unused AMU APIs

This change reduces the exposed surface area of the AMU API in order to
simplify the refactoring work in following patches. The functions and
definitions pr

refactor(amu)!: privatize unused AMU APIs

This change reduces the exposed surface area of the AMU API in order to
simplify the refactoring work in following patches. The functions and
definitions privatized by this change are not used by other parts of the
code-base today.

BREAKING CHANGE: The public AMU API has been reduced to enablement only
to facilitate refactoring work. These APIs were not previously used.

Change-Id: Ibf6174fb5b3949de3c4ba6847cce47d82a6bd08c
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

refactor(amu)!: remove `PLAT_AMU_GROUP1_COUNTERS_MASK`

With the introduction of MPMM, the auxiliary AMU counter logic requires
refactoring to move away from a single platform-defined group 1 counter

refactor(amu)!: remove `PLAT_AMU_GROUP1_COUNTERS_MASK`

With the introduction of MPMM, the auxiliary AMU counter logic requires
refactoring to move away from a single platform-defined group 1 counter
mask in order to support microarchitectural (per-core) group 1 counters.

BREAKING CHANGE: The `PLAT_AMU_GROUP1_COUNTERS_MASK` platform definition
has been removed. Platforms should specify per-core AMU counter masks
via FCONF or a platform-specific mechanism going forward.

Change-Id: I1e852797c7954f92409222b066a1ae57bc72bb05
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

build(amu): introduce `amu.mk`

This change introduces the `amu.mk` Makefile, used to remove the need
to manually include AMU sources into the various build images.
Makefiles requiring the list of AM

build(amu): introduce `amu.mk`

This change introduces the `amu.mk` Makefile, used to remove the need
to manually include AMU sources into the various build images.
Makefiles requiring the list of AMU sources are expected to include
this file and use `${AMU_SOURCES}` to retrieve them.

Change-Id: I3d174033ecdce6439a110d776f0c064c67abcfe0
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

build(fconf)!: clean up source collection

Including the FCONF Makefile today automatically places the FCONF
sources into the source list of the BL1 and BL2 images. This may be
undesirable if, for in

build(fconf)!: clean up source collection

Including the FCONF Makefile today automatically places the FCONF
sources into the source list of the BL1 and BL2 images. This may be
undesirable if, for instance, FCONF is only required for BL31.

This change moves the BL1 and BL2 source appends out of the common
Makefile to where they are required.

BREAKING CHANGE: FCONF is no longer added to BL1 and BL2 automatically
when the FCONF Makefile (`fconf.mk`) is included. When including this
Makefile, consider whether you need to add `${FCONF_SOURCES}` and
`${FCONF_DYN_SOURCES}` to `BL1_SOURCES` and `BL2_SOURCES`.

Change-Id: Ic028eabb7437ae95a57c5bcb7821044d31755c77
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

feat(fdt-wrappers): add CPU enumeration utility function

This change adds a new utility function - `fdtw_for_each_cpu` - to
invoke a callback for every CPU node listed in a flattened device tree
(FD

feat(fdt-wrappers): add CPU enumeration utility function

This change adds a new utility function - `fdtw_for_each_cpu` - to
invoke a callback for every CPU node listed in a flattened device tree
(FDT) with the node identifier and the MPIDR of the core it describes.

Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: Iabb5c0f0c9d11928a4a7a41cdc7d1e09aadeb2bc

show more ...

build(fdt-wrappers): introduce FDT wrappers makefile

This has been introduced to simplify dependencies on the FDT wrappers.
We generally want to avoid pulling in components on a file-by-file
basis,

build(fdt-wrappers): introduce FDT wrappers makefile

This has been introduced to simplify dependencies on the FDT wrappers.
We generally want to avoid pulling in components on a file-by-file
basis, particularly as we are trying to draw conceptual boxes around
components in preparation for transitioning the build system to CMake,
where dependencies are modelled on libraries rather than files.

Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: Idb7ee05a9b54a8caa3e07f36e608867e20b6dcd5

show more ...

build(bl2): deduplicate sources

Deduplicating sources prevents the build system from complaining about
multiply-compiled files, which can happen if multiple makefiles depend
on a component. This alr

build(bl2): deduplicate sources

Deduplicating sources prevents the build system from complaining about
multiply-compiled files, which can happen if multiple makefiles depend
on a component. This already occurs for BL31.

Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: Ic9e67932550f07cb9e4d199f68bc46c33a611748

show more ...

build(bl1): deduplicate sources

Deduplicating sources prevents the build system from complaining about
multiply-compiled files, which can happen if multiple makefiles depend
on a component. This alr

build(bl1): deduplicate sources

Deduplicating sources prevents the build system from complaining about
multiply-compiled files, which can happen if multiple makefiles depend
on a component. This already occurs for BL31.

Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: I9b40402f6f04600061fba7d6ad5d222a71e7d4a7

show more ...

feat(plat/arm/sgi): increase max BL2 size

Increase `PLAT_ARM_MAX_BL2_SIZE` to 128KiB for the primary chip to
accommodate debug builds with log level set to verbose
(LOG_LEVEL=LOG_LEVEL_VERBOSE).

Si

feat(plat/arm/sgi): increase max BL2 size

Increase `PLAT_ARM_MAX_BL2_SIZE` to 128KiB for the primary chip to
accommodate debug builds with log level set to verbose
(LOG_LEVEL=LOG_LEVEL_VERBOSE).

Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: I9dc835430f61b0d0c46a75f7a36d67f165293c8c

show more ...

Merge "fix(sdei): print event number in hex format" into integration

fix(sdei): print event number in hex format

SDEI specified event numbers in hexadecimal format.
Change event number format to hexadecimal to make
it easier for the reader to recognize the proper eve

fix(sdei): print event number in hex format

SDEI specified event numbers in hexadecimal format.
Change event number format to hexadecimal to make
it easier for the reader to recognize the proper event.

Change-Id: Iac7a91d0910316e0ad54a8f09bc17209e8c6adf6
Signed-off-by: Vasyl Gomonovych <vgomonovych@marvell.com>

show more ...

fix: remove "experimental" tag for stable features

there are features which are marked as experimental even though they
are stable and used for quite some time.
Following features are no longer mark

fix: remove "experimental" tag for stable features

there are features which are marked as experimental even though they
are stable and used for quite some time.
Following features are no longer marked as experimental
- SPMD
- MEASURED_BOOT
- FCONF and associated build flags
- DECRYPTION_SUPPORT and associated build flags
- ENABLE_PAUTH
- ENABLE_BTI
- USE_SPINLOCK_CAS
- GICv3 Multichip support

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I4bb653d9c413c66095ec31f0b8aefeb13ea04ee9

show more ...

Merge "fix(cpu): correct Demeter CPU name" into integration

Merge "fix(scmi): mention "SCMI" in driver initialisation message" into integration

fix(cpu): correct Demeter CPU name

This patch changes Cortex Demeter to Neoverse Demeter.

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7306d09ca60e101d0a96c9ceff9845422d75c160

Merge "docs(stm32mp1): fix FIP command with OP-TEE" into integration