feat(mt8189): add dfd driver

Add dfd init flow.

Signed-off-by: Runyang Chen <runyang.chen@mediatek.com>
Change-Id: Iaad7a46d019a7bf5ae86ca7583291975e01bfbfb

Merge "build(handoff)!: switch to LibTL submodule" into integration

Merge "feat(tc): add support for configuring DSU settings" into integration

Merge "fix(nxp-crypto): restricts generating nxp_mkvb via ns-world" into integration

feat(tc): add support for configuring DSU settings

This patch allows tc platforms to update DSU
CLUSTERPWRDN_EL1 and CLUSTERPWRCTLR_EL1 settings.
TC22 and TC23 use the DSU-120. Currently
we use the

feat(tc): add support for configuring DSU settings

This patch allows tc platforms to update DSU
CLUSTERPWRDN_EL1 and CLUSTERPWRCTLR_EL1 settings.
TC22 and TC23 use the DSU-120. Currently
we use the reset values as default settings as
per the DSU-120 TRM.

Reference: https://developer.arm.com/documentation/102547/0201

Change-Id: I48e0b5bd5881612e9b8b804948260f69c25c34d9
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>

show more ...

Merge "feat(dsu): support power control and autonomous powerdown config" into integration

Merge changes Iea4c11de,Icae1fb08 into integration

* changes:
fix(lx2160): add DDRC missing DIMMs
fix(nxp): driver crypto caam

feat(dsu): support power control and autonomous powerdown config

This patch allows platforms to enable certain DSU settings
to ensure memory retention and control over
cache power requests. We also

feat(dsu): support power control and autonomous powerdown config

This patch allows platforms to enable certain DSU settings
to ensure memory retention and control over
cache power requests. We also move the driver out of css
into drivers/arm. Platforms can configure the
CLUSTERPWRCTLR and CLUSTERPWRDN registers [1] to improve
power efficiency.

These registers enable finer-grained control of
DSU power state transitions, including
powerdown and retention.

IMP_CLUSTERPWRCTLR_EL1 provides:
- Functional retention: Allows configuration of the
duration of inactivity before the DSU uses
CLUSTERPACTIVE to request functional retention.

- Cache power request: These bits are output on
CLUSTERPACTIVE[19:16] to indicate to the power controller
which cache portions must remain powered.

IMP_CLUSTERPWRDN_EL1 includes:
- Powerdown: Triggers full cluster powerdown, including
control logic.

- Memory retention: Requests memory retention mode,
keeping L3 RAM contents while powering off
the rest of the DSU.

The DSU-120 TRM [2] provides the full field definitions,
which are used as references in the `dsu_driver_data` structure.

References:
[1]: https://developer.arm.com/documentation/100453/latest/
[2]: https://developer.arm.com/documentation/102547/0201/?lang=en

Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I2eba808b8f2a27797782a333c65dd092b03208fe

show more ...

build(handoff)!: switch to LibTL submodule

Removes in-tree Transfer List implementation and updates all references
to use the external LibTL submodule. Updates include paths, Makefile
macros, and pl

build(handoff)!: switch to LibTL submodule

Removes in-tree Transfer List implementation and updates all references
to use the external LibTL submodule. Updates include paths, Makefile
macros, and platform integration logic to link with LibTL as a static
library.

If you cloned TF-A without the `--recurse-submodules` flag, you can
ensure that this submodule is present by running:

git submodule update --init --recursive

BREAKING-CHANGE: LibTL is now included in TF-A as a submodule.
Please run `git submodule update --init --recursive` if you encounter
issues after migrating to the latest version of TF-A.

Change-Id: I1fa31f7b730066c27985d968698e553b00b07c38
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>

show more ...

Merge changes from topic "mb/lfa-core-work" into integration

* changes:
docs(maintainers): add myself as code owner for LFA service
docs(lfa): update porting guide with LFA platform APIs
feat(

Merge changes from topic "mb/lfa-core-work" into integration

* changes:
docs(maintainers): add myself as code owner for LFA service
docs(lfa): update porting guide with LFA platform APIs
feat(lfa): add LFA holding pen logic
feat(lfa): add initial implementation for LFA_ACTIVATE
feat(lfa): add initial implementation for LFA_PRIME
feat(fvp): implement platform API for load and auth image
feat(lfa): implement LFA_CANCEL SMC
feat(fvp): implement platform API for LFA cancel operation
feat(lfa): implement LFA_GET_INVENTORY SMC
feat(fvp): implement platform API for LFA activation pending check
feat(lfa): implement LFA_GET_INFO SMC and integrate LFA build
feat(fvp): initialize LFA component activators in platform layer
feat(rmm): add placeholder activator callbacks for LFA
feat(bl31): add placeholder activator implementation for LFA
feat(lfa): add activation handler interface for component activation
feat(fvp): implement LFA get components API
feat(lfa): create LFA SMC handler template

show more ...

Merge "fix(imx8mp): remove ERR050463 VPUMIX workaround" into integration

Merge changes from topic "s32g274a/sd_support" into integration

* changes:
feat(s32g274a): move fip in a dedicated partition
feat(s32g274ardb): initialize the IO buffer
feat(s32g274ardb): init

Merge changes from topic "s32g274a/sd_support" into integration

* changes:
feat(s32g274a): move fip in a dedicated partition
feat(s32g274ardb): initialize the IO buffer
feat(s32g274ardb): initialize the uSDHC driver
feat(s32g274ardb): set the system counter rate
feat(s32g274ardb): init the generic timer for BL2
fix(nxp-mmc): handle response for CMD0
refactor(mmc): replace 0 with MMC_RESPONSE_NONE
feat(mmc): add define for no response

show more ...

feat(fvp): implement platform API for load and auth image

Introduce and implement a stub implementation of
`plat_lfa_load_auth_image()` for the FVP platform. For AEM FVP, no
actual image loading or

feat(fvp): implement platform API for load and auth image

Introduce and implement a stub implementation of
`plat_lfa_load_auth_image()` for the FVP platform. For AEM FVP, no
actual image loading or authentication is required as of now, as
images are assumed to be pre-loaded and authenticated.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I82e51f5d18db6d5b9c61f9081b451619d761abe8

show more ...

feat(fvp): implement platform API for LFA cancel operation

Introduce and implement a stub implementation of `plat_lfa_cancel()`
for the FVP platform. This function will later be expanded to handle
c

feat(fvp): implement platform API for LFA cancel operation

Introduce and implement a stub implementation of `plat_lfa_cancel()`
for the FVP platform. This function will later be expanded to handle
component-specific LFA cancellation logic.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I9690b011313bbe0fd458cbe47f32445f8d2d79fa

show more ...

feat(fvp): implement platform API for LFA activation pending check

Introduce and implement `is_plat_lfa_activation_pending()' API for the
FVP platform. Currently, only the RMM component is marked as

feat(fvp): implement platform API for LFA activation pending check

Introduce and implement `is_plat_lfa_activation_pending()' API for the
FVP platform. Currently, only the RMM component is marked as pending.

Change-Id: I6cc84c65ba5fe1b47cc65cbeeb349aac9235533a
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

feat(fvp): initialize LFA component activators in platform layer

Update the FVP platform's LFA component table to populate the
'activator' and 'activation_pending' by introducing fields
in plat_lfa_

feat(fvp): initialize LFA component activators in platform layer

Update the FVP platform's LFA component table to populate the
'activator' and 'activation_pending' by introducing fields
in plat_lfa_component_info_t.
- 'activator': function pointers for component-specific
activation logic
- 'activation_pending': tracks whether the component's activation
is pending

Set the activator function pointers for supported components:
- BL31 via get_bl31_activator()
- RMM (if RME is enabled) via get_rmm_activator()

This allows the LFA service to invoke component-specific prime
and activate callbacks through platform-registered hooks.

Change-Id: Ifd997a8b8cab209c25aabb2e9d4eab59e909ea4d
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

feat(fvp): implement LFA get components API

Introduce platform-specific implementation of
`plat_lfa_get_components()` for the Arm FVP platform. This function
returns LFA component metadata, includin

feat(fvp): implement LFA get components API

Introduce platform-specific implementation of
`plat_lfa_get_components()` for the Arm FVP platform. This function
returns LFA component metadata, including component ID, UUID for
each supported firmware image and number of components.

Change-Id: I9e7cbce5865becf3e4babcb770bc5eb3b69a0be8
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

Merge "fix(imx8ulp): fix variable may be used uninitialized error" into integration

Merge "fix(mediatek-drivers): fix incorrect source assignment" into integration

fix(imx8mp): remove ERR050463 VPUMIX workaround

Errata ERR050463 has been fixed in A1 silicon.

Change-Id: I263531c6eef44a679002cd048e71fb50c63d9030
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signe

fix(imx8mp): remove ERR050463 VPUMIX workaround

Errata ERR050463 has been fixed in A1 silicon.

Change-Id: I263531c6eef44a679002cd048e71fb50c63d9030
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>

show more ...

feat(ti): enable power state validation for K3 SoCs

Add power state validation for K3 SoCs to ensure proper PSCI power state
transitions. Defining validate_power_state enables the
PSCI_CPU_SUSPEND_A

feat(ti): enable power state validation for K3 SoCs

Add power state validation for K3 SoCs to ensure proper PSCI power state
transitions. Defining validate_power_state enables the
PSCI_CPU_SUSPEND_AARCH64 capability and, in turn, CPU_SUSPEND.

validate_power_state checks if the requested power level and power state
are in a valid configuration. If the power state requested is standby,
set the core power state to the maximum retention state.

Change-Id: Ied3ebdc583b2e5b7c86923705954d763997b324e
Signed-off-by: Kendall Willis <k-willis@ti.com>

show more ...

Merge "fix(zynqmp): workaround issue around cntpct_el0" into integration

Merge changes Ia34bc0f4,I0be3773b,I701e357a,Icdbe1992 into integration

* changes:
refactor(versal2): guard handoff logic w/ build flag
refactor(qemu): guard handoff logic w/ build flag
refacto

Merge changes Ia34bc0f4,I0be3773b,I701e357a,Icdbe1992 into integration

* changes:
refactor(versal2): guard handoff logic w/ build flag
refactor(qemu): guard handoff logic w/ build flag
refactor(optee): guard handoff logic w/ build flag
feat(handoff): support libtl submodule builds

show more ...

fix(xilinx): add API to get powerdown request status

The pwrdwn_req_received variable is used across multiple platforms
through extern keyword. Instead of using the extern, add getter
API to access

fix(xilinx): add API to get powerdown request status

The pwrdwn_req_received variable is used across multiple platforms
through extern keyword. Instead of using the extern, add getter
API to access this variable across the platforms, and restrict the
scope of variable to the particular file by defining it as static
variable. This prevents unintended access of variable from other
files and increase safety.

Change-Id: I758466ea7f6be2a90ec249dc3e4fa56cdbe11e57
Signed-off-by: Devanshi Chauhan <devanshi.chauhanalpeshbhai@amd.com>

show more ...

fix(mediatek-drivers): fix incorrect source assignment

The `LOCAL_SRCS-y` variable is being cleared immediately after appending
the `pmic_common_swap_api.c` file, resulting in the file never being
i

fix(mediatek-drivers): fix incorrect source assignment

The `LOCAL_SRCS-y` variable is being cleared immediately after appending
the `pmic_common_swap_api.c` file, resulting in the file never being
included in any platform build.

Change-Id: I55184e8c090bc9bfb4631da5126e07e57a373065
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...