zynqmp: pm: Allow obtaining additional return values from FW

Allow reading more than just a single value from the message buffer.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: Do not alter system counter

On ZynqMP the FSBL will configure the system counter. Hence, remove the
initialization of the system counter with hardcoded values from the ATF
and use the setup

zynqmp: Do not alter system counter

On ZynqMP the FSBL will configure the system counter. Hence, remove the
initialization of the system counter with hardcoded values from the ATF
and use the setup provided by the bootloader.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

show more ...

zynqmp: Read silicon ID register only once

The silicon ID does not change at runtime. Skip the IO access if the
ID has been read before.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: Read silicon ID register only once

The silicon ID does not change at runtime. Skip the IO access if the
ID has been read before.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

show more ...

zynqmp: Make MMIO write FW call synchronous

We must guarantee that writes have become effective before returning to
the caller. Hence, wait for PMUFW signaling completion of the FW call
before retur

zynqmp: Make MMIO write FW call synchronous

We must guarantee that writes have become effective before returning to
the caller. Hence, wait for PMUFW signaling completion of the FW call
before returning to the rich OS.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

show more ...

zynqmp: Add support to provide silicon id through SMC

Add support to provide silicon id to non-secure
software through SMC.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

[ sb
Move

zynqmp: Add support to provide silicon id through SMC

Add support to provide silicon id to non-secure
software through SMC.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

[ sb
Move zynqmp_get_silicon_id outside of compile guards to avoid build
errors.
]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

show more ...

zynqmp: pm: Implemented pm API functions to load the bitstream into PL

This patch adds pm_fpga_load() and pm_fpga_get_status() API's to provide
the Access to the xilfpga library to load the bitstrea

zynqmp: pm: Implemented pm API functions to load the bitstream into PL

This patch adds pm_fpga_load() and pm_fpga_get_status() API's to provide
the Access to the xilfpga library to load the bitstream into zynqmp
PL region.

Signed-off-by: Nava kishore Manne <navam@xilinx.com>

show more ...

zynqmp: pm: adds new pm ID to sync with PMUFW ID numbers

This patch adds a new pm ID to sync with PMUFW ID numbers.

Signed-off-by: Nava kishore Manne <navam@xilinx.com>

zynqmp: Initialize GIC on suspend_finish

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: pm: Call set_wakeup_source for all wake devices on sys-suspend

During system suspend, identify slaves which are configured
as wake sources and call pm_set_wakeup_source API for each of them.

zynqmp: pm: Call set_wakeup_source for all wake devices on sys-suspend

During system suspend, identify slaves which are configured
as wake sources and call pm_set_wakeup_source API for each of them.

Identifying if device may wake the system is done by checking if any
interrupt of that device is enabled in GICD_ISENABLER when the APU is
about to enter SUSPEND_TO_RAM state. If such interrupt is found,
pm_set_wakeup_source is called with corresponding PM node ID as
argument.

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>

show more ...

zynqmp: pm: Add PM node IDs for GPU, PCIE, PCAP and RTC

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>

zynqmp: pm: Provide state argument to the pm_self_suspend API call

The state argument of the pm_self_suspend API encodes the state to
which the APU intends to suspend. The state can be:
- PM_APU_STA

zynqmp: pm: Provide state argument to the pm_self_suspend API call

The state argument of the pm_self_suspend API encodes the state to
which the APU intends to suspend. The state can be:
- PM_APU_STATE_CPU_IDLE - processor power down, all memories remain
on
- PM_APU_STATE_SUSPEND_TO_RAM - all processors powered down, L2$
powered down, all OCM banks in retention and DDR in
self-refresh.
The calls for setting requirements for L2$ and OCM banks are now
redundant and removed.

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
[ sb
- remove redundant #defines
]
Signed-off-by: Sören Brinkmann <soren.brinkmann@xilinx.com>

show more ...

zynqmp: Add simple implementation of zynqmp_validate_power_state()

Implementation is based on arm_validate_power_state().
This function is called during CPU_SUSPEND PSCI call to validate
power_state

zynqmp: Add simple implementation of zynqmp_validate_power_state()

Implementation is based on arm_validate_power_state().
This function is called during CPU_SUSPEND PSCI call to validate
power_state parameter. If state is valid this function populate it
in req_state array as power domain level specific local state.
ATF platform migration guide chapter 2.2 defines this function as
mandatory for PSCIv1.0 CPU_SUSPEND support.

Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>

show more ...

zynqmp: Increase MAX_XLAT_TABLES

When moving the ATF into the DRAM address space an additional
translation table is required.

Reported-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sore

zynqmp: Increase MAX_XLAT_TABLES

When moving the ATF into the DRAM address space an additional
translation table is required.

Reported-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

show more ...

zynqmp: Change default BL31 address space

The OCM space was reorganized to use the space more efficiently. Adjust
the default ATF location to be aligned with other ZynqMP software
components.

Signe

zynqmp: Change default BL31 address space

The OCM space was reorganized to use the space more efficiently. Adjust
the default ATF location to be aligned with other ZynqMP software
components.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

show more ...

zynqmp: Add RW access to L2ACTLR_EL1 and CPUACTLR_EL1

Arm provided error injection support. To enable this error injection,
we need to set L2DEIEN in L2ACTLR_EL1 register and L1DEIEN in
CPUACTLR_EL1

zynqmp: Add RW access to L2ACTLR_EL1 and CPUACTLR_EL1

Arm provided error injection support. To enable this error injection,
we need to set L2DEIEN in L2ACTLR_EL1 register and L1DEIEN in
CPUACTLR_EL1 register.

This is needed for our cortexa53 edac linux driver testing.
These registers need write access from non secure EL1 i.e linux
at the time of setting the above bits.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>

show more ...

zynqmp: Set RESET_TO_BL31 through platform.mk

ZynqMP only supports builds with RESET_TO_BL31=1. Set this option
through the platform makefile on default.

Signed-off-by: Soren Brinkmann <soren.brink

zynqmp: Set RESET_TO_BL31 through platform.mk

ZynqMP only supports builds with RESET_TO_BL31=1. Set this option
through the platform makefile on default.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

show more ...

zynqmp: pm: Added NODE_IPI_RPU_0 node definition in pm_defs

Nodes represent IPI dedicated to the RPU (not accessible by APU)

Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>

zynqmp: Add support for generic_delay_timer

Initialize the generic_delay_timer in the zynqmp port.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Migrate platform makefile to new console driver location

This patch migrates the upstream platform makefiles to include the
console drivers from the new location in ARM Trusted Firmware code
base.

Migrate platform makefile to new console driver location

This patch migrates the upstream platform makefiles to include the
console drivers from the new location in ARM Trusted Firmware code
base.

Change-Id: I866d6c4951e475de1f836ce8a8c1d5e6da9577e3

show more ...

Merge pull request #667 from soby-mathew/sm/PSCI_lib

Introduce PSCI library

Move `arm_common.c` out of aarch64 folder

This patch moves the `arm_common.c` file from `plat/arm/common/aarch64/`
to the parent directory since the functions implemented in the file are
not AArch64

Move `arm_common.c` out of aarch64 folder

This patch moves the `arm_common.c` file from `plat/arm/common/aarch64/`
to the parent directory since the functions implemented in the file are
not AArch64 specific. The platform makefiles are also modified for this
change.

Change-Id: I776d2e4958f59041476cf2f53a9adb5b2d304ee0

show more ...

Include `plat_psci_common.c` from the new location

The `plat_psci_common.c` was moved to the new location `plat/common`
and a stub file was retained at previous location for compatibility. This
patc

Include `plat_psci_common.c` from the new location

The `plat_psci_common.c` was moved to the new location `plat/common`
and a stub file was retained at previous location for compatibility. This
patch modifies the platform makefiles to include the file from the new
location.

Change-Id: Iabddeeb824e9a5d72d176d7c644735966c8c0699

show more ...

zynqmp: Separate code and rodata

Set the SEPARATE_CODE_AND_RODATA build flag to map read-only data as
execute never.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

ARM platforms: Add support for SEPARATE_CODE_AND_RODATA

The arm_setup_page_tables() function used to expect a single set of
addresses defining the extents of the whole read-only section, code
and re

ARM platforms: Add support for SEPARATE_CODE_AND_RODATA

The arm_setup_page_tables() function used to expect a single set of
addresses defining the extents of the whole read-only section, code
and read-only data mixed up, which was mapped as executable.

This patch changes this behaviour. arm_setup_page_tables() now
expects 2 separate sets of addresses:

- the extents of the code section;
- the extents of the read-only data section.

The code is mapped as executable, whereas the data is mapped as
execute-never. New #defines have been introduced to identify the
extents of the code and the read-only data section. Given that
all BL images except BL1 share the same memory layout and linker
script structure, these #defines are common across these images.
The slight memory layout differences in BL1 have been handled by
providing values specific to BL1.

Note that this patch also affects the Xilinx platform port, which
uses the arm_setup_page_tables() function. It has been updated
accordingly, such that the memory mappings on this platform are
unchanged. This is achieved by passing null values as the extents
of the read-only data section so that it is ignored. As a result,
the whole read-only section is still mapped as executable.

Fixes ARM-software/tf-issues#85

Change-Id: I1f95865c53ce6e253a01286ff56e0aa1161abac5

show more ...

Introduce utils.h header file

This patch introduces a new header file: include/lib/utils.h.
Its purpose is to provide generic macros and helper functions that
are independent of any BL image, archit

Introduce utils.h header file

This patch introduces a new header file: include/lib/utils.h.
Its purpose is to provide generic macros and helper functions that
are independent of any BL image, architecture, platform and even
not specific to Trusted Firmware.

For now, it contains only 2 macros: ARRAY_SIZE() and
IS_POWER_OF_TWO(). These were previously defined in bl_common.h and
xlat_tables.c respectively.

bl_common.h includes utils.h to retain compatibility for platforms
that relied on bl_common.h for the ARRAY_SIZE() macro. Upstream
platform ports that use this macro have been updated to include
utils.h.

Change-Id: I960450f54134f25d1710bfbdc4184f12c049a9a9

show more ...