Merge changes from topic "s32g274a/sd_support" into integration

* changes:
feat(s32g274a): move fip in a dedicated partition
feat(s32g274ardb): initialize the IO buffer
feat(s32g274ardb): init

Merge changes from topic "s32g274a/sd_support" into integration

* changes:
feat(s32g274a): move fip in a dedicated partition
feat(s32g274ardb): initialize the IO buffer
feat(s32g274ardb): initialize the uSDHC driver
feat(s32g274ardb): set the system counter rate
feat(s32g274ardb): init the generic timer for BL2
fix(nxp-mmc): handle response for CMD0
refactor(mmc): replace 0 with MMC_RESPONSE_NONE
feat(mmc): add define for no response

show more ...

feat(s32g274ardb): initialize the uSDHC driver

S32G2 and IMX share the same uSDHC controller. Therefore, it is
initialized during BL2 to facilitate the loading of subsequent boot
stages.

Change-Id:

feat(s32g274ardb): initialize the uSDHC driver

S32G2 and IMX share the same uSDHC controller. Therefore, it is
initialized during BL2 to facilitate the loading of subsequent boot
stages.

Change-Id: I223904c24a14a89ef676626b54a5937f39a17eda
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

feat(s32g274ardb): set the system counter rate

Generic timer initialization at the BL2 stage is incomplete without
configuring the system counter frequency. This configuration is
performed by the PS

feat(s32g274ardb): set the system counter rate

Generic timer initialization at the BL2 stage is incomplete without
configuring the system counter frequency. This configuration is
performed by the PSCI layer in BL31.

Change-Id: I134cffe47819061f1608386cf98a39014cd12396
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

feat(s32g274ardb): init the generic timer for BL2

The generic timer must be initialized during BL2 because the uSDHC
driver, which will be enabled in subsequent commits, requires it for
delays.

Cha

feat(s32g274ardb): init the generic timer for BL2

The generic timer must be initialized during BL2 because the uSDHC
driver, which will be enabled in subsequent commits, requires it for
delays.

Change-Id: Ia09b3d3565a09ace7389d2e063af1185cc80fa27
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

Merge changes from topic "nxp-s32g274a/enable-mmu" into integration

* changes:
feat(s32g274a): split early clock initialization
feat(s32g274a): enable MMU for BL31 stage
feat(s32g274a): dynami

Merge changes from topic "nxp-s32g274a/enable-mmu" into integration

* changes:
feat(s32g274a): split early clock initialization
feat(s32g274a): enable MMU for BL31 stage
feat(s32g274a): dynamically map GIC regions
feat(s32g274a): enable MMU for BL2 stage
feat(s32g274a): dynamically map siul2 and fip img
feat(s32g274a): map each image before its loading
feat(nxp-clk): dynamic map of the clock modules
feat(s32g274a): increase the number of MMU regions
feat(s32g274a): add console mapping

show more ...

feat(s32g274a): split early clock initialization

Initializing all early clocks before the MMU is enabled can impact boot
time. Therefore, splitting the setup into A53 clocks and peripheral
clocks ca

feat(s32g274a): split early clock initialization

Initializing all early clocks before the MMU is enabled can impact boot
time. Therefore, splitting the setup into A53 clocks and peripheral
clocks can be beneficial, with the peripheral clocks configured after
fully initializing the MMU.

Change-Id: I19644227b66effab8e2c43e64e057ea0c8625ebc
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

feat(s32g274a): enable MMU for BL2 stage

Enable the MMU and add two entries to map the BL2 code and data regions.
Additional mappings will be added dynamically, enhancing flexibility and
modularity

feat(s32g274a): enable MMU for BL2 stage

Enable the MMU and add two entries to map the BL2 code and data regions.
Additional mappings will be added dynamically, enhancing flexibility and
modularity during the porting process.

Change-Id: I107abf944dfdce9dcff47b08272a5001484de8a9
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

feat(s32g274a): dynamically map siul2 and fip img

Dynamically map the remaining regions part of the BL2 stages using
dynamic regions.

Change-Id: Ia81666920b941218ddaa7d3244dfa5212525c75d
Signed-off

feat(s32g274a): dynamically map siul2 and fip img

Dynamically map the remaining regions part of the BL2 stages using
dynamic regions.

Change-Id: Ia81666920b941218ddaa7d3244dfa5212525c75d
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

feat(s32g274a): map each image before its loading

The regions used by the stages loaded by BL2 must be mapped before they
can be used.

Change-Id: Ia70f8c5f35d7930e2b20f1a26be0ad2cdfea2b1a
Signed-of

feat(s32g274a): map each image before its loading

The regions used by the stages loaded by BL2 must be mapped before they
can be used.

Change-Id: Ia70f8c5f35d7930e2b20f1a26be0ad2cdfea2b1a
Signed-off-by: Khristine Andreea Barbulescu <khristineandreea.barbulescu@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

Merge "feat(s32g274a): add ncore support" into integration

feat(s32g274a): add ncore support

Ncore is a cache-coherent interconnect module. It enables the
integration of heterogenous coherent agents and non-coherent
agents in a chip. TF-A boots with the fir

feat(s32g274a): add ncore support

Ncore is a cache-coherent interconnect module. It enables the
integration of heterogenous coherent agents and non-coherent
agents in a chip. TF-A boots with the first core in isolation
to avoid crashes due to cache invalidation operations. Later,
it will disable the isolation and reconfigure the module every
time a new core is added or removed through PSCI.

Change-Id: Ida42db91b10be1e66c3b9b73674d1e37a61844dd
Signed-off-by: Dan Nica <dan.nica@nxp.com>
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

Merge changes from topic "add_s32cc_fxosc_clk" into integration

* changes:
feat(s32g274a): enable BL2 early clocks
feat(nxp-clk): implement set_rate for oscillators
feat(nxp-clk): add oscillat

Merge changes from topic "add_s32cc_fxosc_clk" into integration

* changes:
feat(s32g274a): enable BL2 early clocks
feat(nxp-clk): implement set_rate for oscillators
feat(nxp-clk): add oscillator clock objects
feat(nxp-clk): add minimal set of S32CC clock ids

show more ...

feat(s32g274a): enable BL2 early clocks

s32cc_init_early_clks will be used to increase the frequency of the
clocks which have a performance impact on BL2 boot. This set includes
A53, XBAR, DDR and L

feat(s32g274a): enable BL2 early clocks

s32cc_init_early_clks will be used to increase the frequency of the
clocks which have a performance impact on BL2 boot. This set includes
A53, XBAR, DDR and Linflex clocks. For now, it will only contain the
frequency set for FXOSC. More clock management will be added in the next
commits.

Change-Id: Ie85465884de02f5082185f91749f190f40249c2e
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

Merge changes from topic "add_s32g274ardb2_support" into integration

* changes:
feat(s32g274a): enable BL31 stage
feat(s32g274a): add S32G274ARDB2 board support
feat(nxp-drivers): add Linflex

Merge changes from topic "add_s32g274ardb2_support" into integration

* changes:
feat(s32g274a): enable BL31 stage
feat(s32g274a): add S32G274ARDB2 board support
feat(nxp-drivers): add Linflex driver

show more ...

feat(s32g274a): add S32G274ARDB2 board support

S32G274ARDB2 is a development board to showcase the capabilities of the
S32G2 SoC. It includes 4 ARM Cortex-A53 cores running at 1.0GHz, 4GBs
of DDR, a

feat(s32g274a): add S32G274ARDB2 board support

S32G274ARDB2 is a development board to showcase the capabilities of the
S32G2 SoC. It includes 4 ARM Cortex-A53 cores running at 1.0GHz, 4GBs
of DDR, accelerators for automotive networking and many other
peripherals.

The added support is minimal and only includes the BL2 stage, with no
MMU enabled. The FIP is preloaded by the BootROM in SRAM, and BL2 copies
BL31 and BL33 from FIP to their designated addresses.

Change-Id: Iedda23302768ab70d63787117c5f6f3c21eb9842
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Dan Nica <dan.nica@nxp.com>
Signed-off-by: Andra-Teodora Ilie <andra.ilie@nxp.com>
Signed-off-by: Bogdan Roman <bogdan-gabriel.roman@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...