| /OK3568_Linux_fs/u-boot/doc/ |
| H A D | README.Heterogeneous-SoCs | 1 DSP side awareness for Freescale heterogeneous multicore chips based on 7 SC3900/DSP cores and such devices like CPRI, MAPLE, MAPLE-ULB etc. 9 Code for DSP side awareness provides such functionality for Freescale 19 Code added in this file to print the DSP cores and other device's(CPRI, 35 in the system and CONFIGS for SC3900/DSP components 50 DSP/SC3900 core clusters 73 DSP cores and other device's components have been added in this structure. 75 freq_processor_dsp[CONFIG_MAX_DSP_CPUS] - Array to contain the DSP core's frequencies 91 DSP CPU0:1200 MHz, DSP CPU1:1200 MHz, DSP CPU2:1200 MHz, DSP CPU3:1200 MHz, 92 DSP CPU4:1200 MHz, DSP CPU5:1200 MHz, [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/hwmon/ |
| H A D | lochnagar.rst | 33 in1_input Measured voltage for 1V8 DSP (milliVolts) 34 in1_label "1V8 DSP" 35 curr2_input Measured current for 1V8 DSP (milliAmps) 36 curr2_label "1V8 DSP" 37 power2_average Measured average power for 1V8 DSP (microWatts) 39 power2_label "1V8 DSP" 47 in3_input Measured voltage for VDDCORE DSP (milliVolts) 48 in3_label "VDDCORE DSP" 49 curr4_input Measured current for VDDCORE DSP (milliAmps) 50 curr4_label "VDDCORE DSP" [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/sound/soc/ |
| H A D | dpcm.rst | 10 digital audio to I2S DAI0, I2S DAI1 or PDM DAI2. This is useful for on SoC DSP 15 graph representing the DSP internal audio paths and uses the mixer settings to 22 Phone Audio System with SoC based DSP 29 | Front End PCMs | SoC DSP | Back End DAIs | Audio devices | 35 * DSP * 47 modem. This sound card exposes 4 DSP front end (FE) ALSA PCM devices and 66 * DSP * 83 * DSP * 130 | Front End PCMs | SoC DSP | Back End DAIs | Audio devices | 136 * DSP * [all …]
|
| H A D | platform.rst | 6 drivers and DSP drivers. The platform drivers only target the SoC CPU and must 68 SoC DSP Drivers 71 Each SoC DSP driver usually supplies the following features :- 75 3. DMA IO to/from DSP buffers (if applicable) 76 4. Definition of DSP front end (FE) PCM devices.
|
| H A D | codec-to-codec.rst | 64 .name = "CPU-DSP", 65 .stream_name = "CPU-DSP", 76 .name = "DSP-CODEC", 77 .stream_name = "DSP-CODEC",
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/remoteproc/ |
| H A D | ti,davinci-rproc.txt | 1 TI Davinci DSP devices 7 The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that 13 controller, a dedicated local power/sleep controller etc. The DSP processor 14 core used in Davinci SoCs is usually a C674x DSP CPU. 16 DSP Device Node: 18 Each DSP Core sub-system is represented as a single DT node. 38 interrupts from the DSP. The value should follow the 52 /* DSP Reserved Memory node */ 65 /* DSP node */
|
| H A D | ti,keystone-rproc.txt | 1 TI Keystone DSP devices 4 The TI Keystone 2 family of SoCs usually have one or more (upto 8) TI DSP Core 10 a dedicated local power/sleep controller etc. The DSP processor core in 13 DSP Device Node: 15 Each DSP Core sub-system is represented as a single DT node, and should also 42 State Control node, and the register offset of the DSP 83 and an args specifier containing the DSP device id 101 /* 66AK2H/K DSP aliases */ 113 /* 66AK2H/K DSP memory node */ 126 /* 66AK2H/K DSP node */ [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/gpio/ |
| H A D | gpio-dsp-keystone.txt | 1 Keystone 2 DSP GPIO controller bindings 3 HOST OS userland running on ARM can send interrupts to DSP cores using 4 the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core. 7 For example TCI6638K2K SoC has 8 DSP GPIO controllers: 10 Keystone 2 DSP GPIO controller has specific features: 12 - setting GPIO value to 1 causes IRQ generation on target DSP core;
|
| /OK3568_Linux_fs/kernel/drivers/firmware/imx/ |
| H A D | Kconfig | 3 tristate "IMX DSP Protocol driver" 6 This enables DSP IPC protocol between host AP (Linux) 7 and the firmware running on DSP. 8 DSP exists on some i.MX8 processors (e.g i.MX8QM, i.MX8QXP). 11 exchange information with DSP side.
|
| /OK3568_Linux_fs/kernel/arch/sh/ |
| H A D | Kconfig.cpu | 40 prompt "DSP support" 44 have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP). 46 This option must be set in order to enable the DSP.
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/dma/ |
| H A D | ste-dma40.txt | 86 24: Multimedia DSP SXA0 87 25: Multimedia DSP SXA1 88 26: Multimedia DSP SXA2 89 27: Multimedia DSP SXA3 106 44: Multimedia DSP SXA4 107 45: Multimedia DSP SXA5 108 46: SLIMbus channel 8 or Multimedia DSP SXA6 109 47: SLIMbus channel 9 or Multimedia DSP SXA7
|
| /OK3568_Linux_fs/kernel/sound/soc/intel/ |
| H A D | Kconfig | 9 has an audio controller with a DSP and I2S or DMIC port, then 90 If you have a Intel Skylake platform with the DSP enabled 99 If you have a Intel Broxton/ApolloLake platform with the DSP 108 If you have a Intel Kabylake platform with the DSP 117 If you have a Intel GeminiLake platform with the DSP 126 If you have a Intel CNL/WHL platform with the DSP 135 If you have a Intel CoffeeLake platform with the DSP 144 If you have a Intel CometLake-H platform with the DSP 153 If you have a Intel CometLake-LP platform with the DSP 182 GeminiLake or CannonLake platform with the DSP enabled in the BIOS
|
| /OK3568_Linux_fs/u-boot/board/freescale/bsc9131rdb/ |
| H A D | README | 4 It combines Power Architecture e500v2 and DSP StarCore SC3850 core 11 . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache 104 0xA0000000 0xBFFFFFFF Shared DSP core L2/M2 space 512M 109 0xFEE0_0000 0xFEE0_0FFF DSP Boot ROM 4K 110 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M 117 0x3700_0000 0x37FF_FFFF PowerPC-DSP shared control area 118 0x3800_0000 0x4FFF_FFFF DSP Private area 121 data communcation between PowerPC and DSP core.
|
| /OK3568_Linux_fs/kernel/Documentation/sound/designs/ |
| H A D | compress-offload.rst | 17 In recent years, audio digital signal processors (DSP) were integrated 68 streaming compressed data to a DSP, with the assumption that the 75 DSP, eg. Android HAL or PulseAudio sinks. By construction, regular 95 is transmitted to the audio DSP. DMA transfers from main memory to an 132 This routines returns the actual settings used by the DSP. Changes to 140 refilled or the delay due to decoding/encoding/io on the DSP. 216 So we need to pass this to DSP. This metadata is extracted from ID3/MP4 headers 218 interface to pass this information to the DSP. Also DSP and userspace needs to 229 This routine tells DSP that metadata and write operation sent after this would 233 This is called when end of file is reached. The userspace can inform DSP that [all …]
|
| /OK3568_Linux_fs/u-boot/board/freescale/bsc9132qds/ |
| H A D | README | 6 The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850 17 - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2 109 0xA000_0000 0xA7FF_FFFF DSP core1 L2 space 128M 110 0xB000_0000 0xB0FF_FFFF DSP core0 M2 space 16M 111 0xB100_0000 0xB1FF_FFFF DSP core1 M2 space 16M 118 0xFEE0_0000 0xFEE0_0FFF DSP Boot ROM 4K 119 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M
|
| /OK3568_Linux_fs/kernel/arch/arc/ |
| H A D | Kconfig | 412 bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6 and/or DSP)" 426 prompt "DSP support" 429 Depending on the configuration, CPU can contain DSP registers 435 bool "No DSP extension presence in HW" 437 No DSP extension presence in HW 440 bool "DSP extension in HW, no support for userspace" 444 DSP extension presence in HW, no support for DSP-enabled userspace 445 applications. We don't save / restore DSP registers and only do 449 bool "Support DSP for userspace apps" 454 DSP extension presence in HW, support save / restore DSP registers to [all …]
|
| /OK3568_Linux_fs/buildroot/package/uhd/ |
| H A D | 0006-usrp2-Replace-boost-math-iround-math-sign-with-std-l.patch | 39 new_freq -= dac_shift; //update FPGA DSP target freq 41 "DSP Tuning: Requested " + std::to_string(freq_/1e6) + " MHz, Using " 42 - "Nyquist zone " + std::to_string(sign*zone) + ", leftover DSP tuning: " 43 + "Nyquist zone " + std::to_string(zone) + ", leftover DSP tuning: "
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/iommu/ |
| H A D | ti,omap-iommu.txt | 7 "ti,dra7-dsp-iommu" for DRA7xx DSP IOMMU instances 27 is required for DSP IOMMU instances on DRA7xx SoCs. The 28 instance number should be 0 for DSP MDMA MMUs and 1 for 29 DSP EDMA MMUs.
|
| /OK3568_Linux_fs/kernel/drivers/remoteproc/ |
| H A D | Kconfig | 12 Support for remote processors (such as DSP coprocessors). These 62 and DSP on OMAP4) via the remote processor framework. 68 offloaded to remote DSP processors using this framework). 107 offloaded to remote DSP processors using this framework). 110 loaded on the DSP. This file must reside in the /lib/firmware 122 Say Y here here to support Keystone remote processors (DSP) 220 modem or DSP. 266 tristate "TI K3 DSP remoteproc support" 271 Say m here to support TI's C66x and C71x DSP remote processor 276 the DSP slave processors.
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/arm/omap/ |
| H A D | dsp.txt | 1 * TI - DSP (Digital Signal Processor) 3 TI DSP included in OMAP SoC
|
| /OK3568_Linux_fs/kernel/sound/soc/sof/ |
| H A D | Kconfig | 6 generic open source audio DSP firmware for multiple devices. 134 if you are trying to debug IPC with the DSP firmware. 153 memory -> DSP resource (memory, register, etc) 154 before the audio DSP is suspended. This will increase the suspend 171 the DSP with test IPCs and gather stats about response times. 176 bool "SOF retain DSP context on any FW exceptions" 178 This option keeps the DSP in D0 state so that firmware debug 180 Say Y if you want to retain DSP context for FW exceptions.
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/powerpc/nintendo/ |
| H A D | gamecube.txt | 45 1.c) The Digital Signal Procesor (DSP) node 53 - reg : should contain the DSP registers location and length 54 - interrupts : should contain the DSP interrupt 60 The ARAM node must be placed under the DSP node.
|
| /OK3568_Linux_fs/buildroot/package/liquid-dsp/ |
| H A D | Config.in | 9 Liquid-DSP is a free and open-source signal processing 11 purpose is to provide a set of extensible DSP modules that
|
| /OK3568_Linux_fs/yocto/poky/meta/recipes-multimedia/speex/ |
| H A D | speexdsp_1.2.0.bb | 1 SUMMARY = "A patent-free DSP library" 2 DESCRIPTION = "SpeexDSP is a patent-free, Open Source/Free Software DSP library."
|
| /OK3568_Linux_fs/yocto/poky/meta/conf/machine/include/arm/ |
| H A D | arch-armv5-dsp.inc | 3 TUNEVALID[dsp] = "ARM DSP functionality" 16 # Little Endian + VFP/DSP 40 # Big Endian + VFP/DSP
|