| /rk3399_ARM-atf/plat/xilinx/common/include/ |
| H A D | plat_clkfunc.h | f000744e0f501c89fb2240b47e91c261e3082249 Thu Dec 14 05:22:24 UTC 2023 Prasad Kummari <prasad.kummari@amd.com> fix(versal): initialize cntfrq_el0 register
The set_cnt_freq() function is introduced to configure the counter
frequency register.If the counter frequency register is zero, it writes
the output of plat_get_syscnt_freq2() the cpu_clocks to the counter
frequency register.
According to the design specifications provided for Versal, the
lpd_data.cdo file contains a mask_write operation for register
0xFF140020 (base_frequency_ID_register) to set it to 0x5f5e100,
configuring it for a 100MHz clock frequency.
Reading the value of the IOU_SCNTRS_BASE_FREQ register using
mmio_read_32() to determine the counter frequency. If the counter
frequency is zero, the system will set the default CPU clocks constants
in TF-A and displays message. However, if the counter frequency is
non-zero, the program will return the value stored in the
IOU_SCNTRS_BASE_FREQ register.
The issue lies in dcc_status_timeout(),function verifying timeout
status, particularly within timeout_cnt_us2cnt(), converting
microseconds to counter ticks using read_cntfrq_el0(), which returns
zero. timeout_elapsed() then checks if the current counter from
read_cntpct_el0()exceeds the expiration count, denoting timeout.
After the function set_cnt_freq() writes into the counter frequency
register, the function timeout_cnt_us2cnt() is used to obtain the
appropriate counter ticks. Subsequently, the function timeout_elapsed()
checks whether the current counter value read_cntpct_el0() has
exceeded the specified expiration count. If it has, this indicates
that the timeout has lapsed.
Change-Id: I8f2f4d804b5aefa6f92083d831a5ebfade384294
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
|
| /rk3399_ARM-atf/plat/xilinx/common/ |
| H A D | plat_clkfunc.c | f000744e0f501c89fb2240b47e91c261e3082249 Thu Dec 14 05:22:24 UTC 2023 Prasad Kummari <prasad.kummari@amd.com> fix(versal): initialize cntfrq_el0 register
The set_cnt_freq() function is introduced to configure the counter
frequency register.If the counter frequency register is zero, it writes
the output of plat_get_syscnt_freq2() the cpu_clocks to the counter
frequency register.
According to the design specifications provided for Versal, the
lpd_data.cdo file contains a mask_write operation for register
0xFF140020 (base_frequency_ID_register) to set it to 0x5f5e100,
configuring it for a 100MHz clock frequency.
Reading the value of the IOU_SCNTRS_BASE_FREQ register using
mmio_read_32() to determine the counter frequency. If the counter
frequency is zero, the system will set the default CPU clocks constants
in TF-A and displays message. However, if the counter frequency is
non-zero, the program will return the value stored in the
IOU_SCNTRS_BASE_FREQ register.
The issue lies in dcc_status_timeout(),function verifying timeout
status, particularly within timeout_cnt_us2cnt(), converting
microseconds to counter ticks using read_cntfrq_el0(), which returns
zero. timeout_elapsed() then checks if the current counter from
read_cntpct_el0()exceeds the expiration count, denoting timeout.
After the function set_cnt_freq() writes into the counter frequency
register, the function timeout_cnt_us2cnt() is used to obtain the
appropriate counter ticks. Subsequently, the function timeout_elapsed()
checks whether the current counter value read_cntpct_el0() has
exceeded the specified expiration count. If it has, this indicates
that the timeout has lapsed.
Change-Id: I8f2f4d804b5aefa6f92083d831a5ebfade384294
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
|
| /rk3399_ARM-atf/plat/xilinx/versal/include/ |
| H A D | plat_private.h | f000744e0f501c89fb2240b47e91c261e3082249 Thu Dec 14 05:22:24 UTC 2023 Prasad Kummari <prasad.kummari@amd.com> fix(versal): initialize cntfrq_el0 register
The set_cnt_freq() function is introduced to configure the counter
frequency register.If the counter frequency register is zero, it writes
the output of plat_get_syscnt_freq2() the cpu_clocks to the counter
frequency register.
According to the design specifications provided for Versal, the
lpd_data.cdo file contains a mask_write operation for register
0xFF140020 (base_frequency_ID_register) to set it to 0x5f5e100,
configuring it for a 100MHz clock frequency.
Reading the value of the IOU_SCNTRS_BASE_FREQ register using
mmio_read_32() to determine the counter frequency. If the counter
frequency is zero, the system will set the default CPU clocks constants
in TF-A and displays message. However, if the counter frequency is
non-zero, the program will return the value stored in the
IOU_SCNTRS_BASE_FREQ register.
The issue lies in dcc_status_timeout(),function verifying timeout
status, particularly within timeout_cnt_us2cnt(), converting
microseconds to counter ticks using read_cntfrq_el0(), which returns
zero. timeout_elapsed() then checks if the current counter from
read_cntpct_el0()exceeds the expiration count, denoting timeout.
After the function set_cnt_freq() writes into the counter frequency
register, the function timeout_cnt_us2cnt() is used to obtain the
appropriate counter ticks. Subsequently, the function timeout_elapsed()
checks whether the current counter value read_cntpct_el0() has
exceeded the specified expiration count. If it has, this indicates
that the timeout has lapsed.
Change-Id: I8f2f4d804b5aefa6f92083d831a5ebfade384294
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
|
| H A D | versal_def.h | f000744e0f501c89fb2240b47e91c261e3082249 Thu Dec 14 05:22:24 UTC 2023 Prasad Kummari <prasad.kummari@amd.com> fix(versal): initialize cntfrq_el0 register
The set_cnt_freq() function is introduced to configure the counter
frequency register.If the counter frequency register is zero, it writes
the output of plat_get_syscnt_freq2() the cpu_clocks to the counter
frequency register.
According to the design specifications provided for Versal, the
lpd_data.cdo file contains a mask_write operation for register
0xFF140020 (base_frequency_ID_register) to set it to 0x5f5e100,
configuring it for a 100MHz clock frequency.
Reading the value of the IOU_SCNTRS_BASE_FREQ register using
mmio_read_32() to determine the counter frequency. If the counter
frequency is zero, the system will set the default CPU clocks constants
in TF-A and displays message. However, if the counter frequency is
non-zero, the program will return the value stored in the
IOU_SCNTRS_BASE_FREQ register.
The issue lies in dcc_status_timeout(),function verifying timeout
status, particularly within timeout_cnt_us2cnt(), converting
microseconds to counter ticks using read_cntfrq_el0(), which returns
zero. timeout_elapsed() then checks if the current counter from
read_cntpct_el0()exceeds the expiration count, denoting timeout.
After the function set_cnt_freq() writes into the counter frequency
register, the function timeout_cnt_us2cnt() is used to obtain the
appropriate counter ticks. Subsequently, the function timeout_elapsed()
checks whether the current counter value read_cntpct_el0() has
exceeded the specified expiration count. If it has, this indicates
that the timeout has lapsed.
Change-Id: I8f2f4d804b5aefa6f92083d831a5ebfade384294
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
|
| /rk3399_ARM-atf/plat/xilinx/versal/aarch64/ |
| H A D | versal_common.c | f000744e0f501c89fb2240b47e91c261e3082249 Thu Dec 14 05:22:24 UTC 2023 Prasad Kummari <prasad.kummari@amd.com> fix(versal): initialize cntfrq_el0 register
The set_cnt_freq() function is introduced to configure the counter
frequency register.If the counter frequency register is zero, it writes
the output of plat_get_syscnt_freq2() the cpu_clocks to the counter
frequency register.
According to the design specifications provided for Versal, the
lpd_data.cdo file contains a mask_write operation for register
0xFF140020 (base_frequency_ID_register) to set it to 0x5f5e100,
configuring it for a 100MHz clock frequency.
Reading the value of the IOU_SCNTRS_BASE_FREQ register using
mmio_read_32() to determine the counter frequency. If the counter
frequency is zero, the system will set the default CPU clocks constants
in TF-A and displays message. However, if the counter frequency is
non-zero, the program will return the value stored in the
IOU_SCNTRS_BASE_FREQ register.
The issue lies in dcc_status_timeout(),function verifying timeout
status, particularly within timeout_cnt_us2cnt(), converting
microseconds to counter ticks using read_cntfrq_el0(), which returns
zero. timeout_elapsed() then checks if the current counter from
read_cntpct_el0()exceeds the expiration count, denoting timeout.
After the function set_cnt_freq() writes into the counter frequency
register, the function timeout_cnt_us2cnt() is used to obtain the
appropriate counter ticks. Subsequently, the function timeout_elapsed()
checks whether the current counter value read_cntpct_el0() has
exceeded the specified expiration count. If it has, this indicates
that the timeout has lapsed.
Change-Id: I8f2f4d804b5aefa6f92083d831a5ebfade384294
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
|
| /rk3399_ARM-atf/plat/xilinx/versal/ |
| H A D | platform.mk | f000744e0f501c89fb2240b47e91c261e3082249 Thu Dec 14 05:22:24 UTC 2023 Prasad Kummari <prasad.kummari@amd.com> fix(versal): initialize cntfrq_el0 register
The set_cnt_freq() function is introduced to configure the counter
frequency register.If the counter frequency register is zero, it writes
the output of plat_get_syscnt_freq2() the cpu_clocks to the counter
frequency register.
According to the design specifications provided for Versal, the
lpd_data.cdo file contains a mask_write operation for register
0xFF140020 (base_frequency_ID_register) to set it to 0x5f5e100,
configuring it for a 100MHz clock frequency.
Reading the value of the IOU_SCNTRS_BASE_FREQ register using
mmio_read_32() to determine the counter frequency. If the counter
frequency is zero, the system will set the default CPU clocks constants
in TF-A and displays message. However, if the counter frequency is
non-zero, the program will return the value stored in the
IOU_SCNTRS_BASE_FREQ register.
The issue lies in dcc_status_timeout(),function verifying timeout
status, particularly within timeout_cnt_us2cnt(), converting
microseconds to counter ticks using read_cntfrq_el0(), which returns
zero. timeout_elapsed() then checks if the current counter from
read_cntpct_el0()exceeds the expiration count, denoting timeout.
After the function set_cnt_freq() writes into the counter frequency
register, the function timeout_cnt_us2cnt() is used to obtain the
appropriate counter ticks. Subsequently, the function timeout_elapsed()
checks whether the current counter value read_cntpct_el0() has
exceeded the specified expiration count. If it has, this indicates
that the timeout has lapsed.
Change-Id: I8f2f4d804b5aefa6f92083d831a5ebfade384294
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
|
| H A D | bl31_versal_setup.c | f000744e0f501c89fb2240b47e91c261e3082249 Thu Dec 14 05:22:24 UTC 2023 Prasad Kummari <prasad.kummari@amd.com> fix(versal): initialize cntfrq_el0 register
The set_cnt_freq() function is introduced to configure the counter
frequency register.If the counter frequency register is zero, it writes
the output of plat_get_syscnt_freq2() the cpu_clocks to the counter
frequency register.
According to the design specifications provided for Versal, the
lpd_data.cdo file contains a mask_write operation for register
0xFF140020 (base_frequency_ID_register) to set it to 0x5f5e100,
configuring it for a 100MHz clock frequency.
Reading the value of the IOU_SCNTRS_BASE_FREQ register using
mmio_read_32() to determine the counter frequency. If the counter
frequency is zero, the system will set the default CPU clocks constants
in TF-A and displays message. However, if the counter frequency is
non-zero, the program will return the value stored in the
IOU_SCNTRS_BASE_FREQ register.
The issue lies in dcc_status_timeout(),function verifying timeout
status, particularly within timeout_cnt_us2cnt(), converting
microseconds to counter ticks using read_cntfrq_el0(), which returns
zero. timeout_elapsed() then checks if the current counter from
read_cntpct_el0()exceeds the expiration count, denoting timeout.
After the function set_cnt_freq() writes into the counter frequency
register, the function timeout_cnt_us2cnt() is used to obtain the
appropriate counter ticks. Subsequently, the function timeout_elapsed()
checks whether the current counter value read_cntpct_el0() has
exceeded the specified expiration count. If it has, this indicates
that the timeout has lapsed.
Change-Id: I8f2f4d804b5aefa6f92083d831a5ebfade384294
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
|