amlogic: makefile: Use PLAT variable when possible

To address the file names.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ib79b8dfa032a1db012c5031d47de61e1a16b5f9a

amlogic: sha_dma: Move register mappings to platform header

The registers location for the SHA DMA driver is not unique for the
different platforms. Move the mapping out of the driver and into the
p

amlogic: sha_dma: Move register mappings to platform header

The registers location for the SHA DMA driver is not unique for the
different platforms. Move the mapping out of the driver and into the
platform-specific header.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ice64637844a3cb384b01e466cb8c1cea5f764129

show more ...

amlogic: scpi: Add support to retrieve chip ID

Both kernel and U-Boot use a SMC call to the secure monitor to get the
chip ID. This call is translated by BL31 to a call to the SCP to
retrieve the ID

amlogic: scpi: Add support to retrieve chip ID

Both kernel and U-Boot use a SMC call to the secure monitor to get the
chip ID. This call is translated by BL31 to a call to the SCP to
retrieve the ID. Add a new SiP call and the backing SCPI command.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ib128f5645ee92866e7ebbcd550dacd33f573524b

show more ...

Merge changes from topic "raspberry-pi-4-support" into integration

* changes:
rpi3: Do prescaler and control setup in C
rpi3: Prepare for supporting a GIC (in RPi4)
rpi3: Make SHARED_RAM optio

Merge changes from topic "raspberry-pi-4-support" into integration

* changes:
rpi3: Do prescaler and control setup in C
rpi3: Prepare for supporting a GIC (in RPi4)
rpi3: Make SHARED_RAM optional
rpi3: Rename RPI3_IO_BASE to RPI_IO_BASE
rpi3: Move shared rpi3 files into common directory

show more ...

Merge changes from topic "raspberry-pi-4-support" into integration

* changes:
Add fdt_add_reserved_memory() helper function
qemu: Move and generalise FDT PSCI fixup

Merge changes from topic "raspberry-pi-4-support" into integration

* changes:
rpi3: Move rng driver to drivers
rpi3: Move VC mailbox driver into generic drivers directory
rpi3: Move rpi3_hw.h

Merge changes from topic "raspberry-pi-4-support" into integration

* changes:
rpi3: Move rng driver to drivers
rpi3: Move VC mailbox driver into generic drivers directory
rpi3: Move rpi3_hw.h header file to include/rpi_hw.h

show more ...

Merge "rpi3: Add "rpi" platform directory" into integration

mediatek: mt8183: add MTK MCDI driver

Add MCDI driver for power saving.

Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: I93ecff4d7581f678be09dd8fb5dfaaccd5f2c22c

mediatek: mt8183: add MTK SSPM driver

Add MTK SSPM driver.

Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: I30dd9a95456b8c3c8d18fd22120824eec97634ee

mediatek: mt8183: add MTK SPM driver

Add MTK SPM driver for suspend/resume scenario.

Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: I8207eea95914da9e63c62f3afc8329f3ccd9a22c

mediatek: mt8183: add MTK uart driver for controlling clock gate

Add uart clock gate contol for suspend/resume scenario.

Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: Id4197b0720

mediatek: mt8183: add MTK uart driver for controlling clock gate

Add uart clock gate contol for suspend/resume scenario.

Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: Id4197b0720630ec6c74aec206a9b206511bf515a

show more ...

mediatek: mt8183: configure MCUSYS DCM

Configure MCUSYS DCM.

Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: Ib810125b514cbcc43c770377bc71a29a05a19320

mediatek: mt8173: refactor RTC and PMIC drivers

Refactor RTC and PMIC drivers.

Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: I74fca536cd61e00c962f080f1ba3759287682ecf

rpi3: Do prescaler and control setup in C

To initialise the arch timer configuration and some clock prescaler, we
need to do two MMIO access *once*, early during boot.

As tempting as it may sound,

rpi3: Do prescaler and control setup in C

To initialise the arch timer configuration and some clock prescaler, we
need to do two MMIO access *once*, early during boot.

As tempting as it may sound, plat_reset_handler() is not the right place
to do this, as it will be called on every CPU coming up, both for
secondary cores as well as during warmboots. So this access will be done
multiple times, and even during a rich OS' runtime. Whether doing so anyway
is actually harmful is hard to say, but we should definitely avoid this if
possible.

Move the initialisation of these registers to C code in
bl1_early_platform_setup(), where it will still be executed early enough
(before enabling the console), but only once during the whole boot
process.

Change-Id: I081c41a5476d424411411488ff8f633e87d3bcc5
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

rpi3: Move rng driver to drivers

To allow sharing the driver between the RPi3 and RPi4, move the random
number generator driver into the generic driver directory.

Change-Id: Iae94d7cb22c6bce3af9bff

rpi3: Move rng driver to drivers

To allow sharing the driver between the RPi3 and RPi4, move the random
number generator driver into the generic driver directory.

Change-Id: Iae94d7cb22c6bce3af9bff709d76d4caf87b14d1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

rpi3: Add "rpi" platform directory

With the incoming support for the Raspberry Pi 4 boards, one directory
to serve both versions will not end up well.

Create an additional layer by inserting a "rpi

rpi3: Add "rpi" platform directory

With the incoming support for the Raspberry Pi 4 boards, one directory
to serve both versions will not end up well.

Create an additional layer by inserting a "rpi" directory betweeen /plat
and rpi3, so that we can more easily share or separate files between the
two later.

Change-Id: I75adbb054fe7902f34db0fd5e579a55612dd8a5f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

rpi3: Prepare for supporting a GIC (in RPi4)

As the PSCI "power" management functions for the Raspberry Pi 3 port
will be shared with the upcoming RPi4 support, we need to prepare them
for dealing w

rpi3: Prepare for supporting a GIC (in RPi4)

As the PSCI "power" management functions for the Raspberry Pi 3 port
will be shared with the upcoming RPi4 support, we need to prepare them
for dealing with the GIC interrupt controller.
Splitting this code just for those simple calls to the generic GIC
routines does not seem worthwhile, so just use a #define the protect the
GIC code from being included by the existing RPi3 code.

Change-Id: Iaca6b0214563852b28ad4a088ec45348ae8be40d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

qemu: Move and generalise FDT PSCI fixup

The QEMU platform port scans its device tree to advertise PSCI as the
CPU enable method. It does this by scanning *every* node in the DT and
check whether it

qemu: Move and generalise FDT PSCI fixup

The QEMU platform port scans its device tree to advertise PSCI as the
CPU enable method. It does this by scanning *every* node in the DT and
check whether its compatible string starts with "arm,cortex-a". Then it
sets the enable-method to PSCI, if it doesn't already have one.

Other platforms might want to use this functionality as well, so let's
move it out of the QEMU platform directory and make it more robust by
fixing some shortcomings:
- A compatible string starting with a certain prefix is not a good way
to find the CPU nodes. For instance a "arm,cortex-a72-pmu" node will
match as well and is in turn favoured with an enable-method.
- If the DT already has an enable-method, we won't change this to PSCI.

Those two issues will for instance fail on the Raspberry Pi 4 DT.
To fix those problems, we adjust the scanning method:
The DT spec says that all CPU nodes are subnodes of the mandatory
/cpus node, which is a subnode of the root node. Also each CPU node has
to have a device_type = "cpu" property. So we find the /cpus node, then
scan for a subnode with the proper device_type, forcing the
enable-method to "psci".
We have to restart this search after a property has been patched, as the
node offsets might have changed meanwhile.

This allows this routine to be reused for the Raspberry Pi 4 later.

Change-Id: I00cae16cc923d9f8bb96a9b2a2933b9a79b06139
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

rpi3: Move VC mailbox driver into generic drivers directory

To allow sharing the driver between the RPi3 and RPi4, move the mailbox
driver into the generic driver directory.

Change-Id: I463e49acf82

rpi3: Move VC mailbox driver into generic drivers directory

To allow sharing the driver between the RPi3 and RPi4, move the mailbox
driver into the generic driver directory.

Change-Id: I463e49acf82b02bf004f3d56482b7791f3020bc0
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

rpi3: Make SHARED_RAM optional

The existing Raspberry Pi 3 port sports a number of memory regions,
which are used for several purposes. The upcoming RPi4 port will not use
all of those, so make the

rpi3: Make SHARED_RAM optional

The existing Raspberry Pi 3 port sports a number of memory regions,
which are used for several purposes. The upcoming RPi4 port will not use
all of those, so make the SHARED_RAM region optional, by only mapping it
if it has actually been defined. This helps to get a cleaner RPi4 port.

Change-Id: Id69677b7fb6ed48d9f238854b610896785db8cab
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

rpi3: Move rpi3_hw.h header file to include/rpi_hw.h

With the advent of Raspberry Pi 4 support, we need to separate some
board specific headers between the RPi3 and RPi4.
Rename and move the "rpi3_h

rpi3: Move rpi3_hw.h header file to include/rpi_hw.h

With the advent of Raspberry Pi 4 support, we need to separate some
board specific headers between the RPi3 and RPi4.
Rename and move the "rpi3_hw.h" header, so that .c files just include
rpi_hw.h, and automatically get the correct version.

Change-Id: I03b39063028d2bee1429bffccde71dddfe2dcde8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

rpi3: Rename RPI3_IO_BASE to RPI_IO_BASE

The location of the MMIO window is different between a Raspberry Pi 3
and 4: the former has it just below 1GB, the latter below 4GB.
The relative location of

rpi3: Rename RPI3_IO_BASE to RPI_IO_BASE

The location of the MMIO window is different between a Raspberry Pi 3
and 4: the former has it just below 1GB, the latter below 4GB.
The relative location of the peripherals is mostly compatible though.

To allow sharing code between the two models, let's rename the symbol
used for the MMIO base to the more generic RPI_IO_BASE name.

Change-Id: I3c2762fb30fd56cca743348e79d72ef8c60ddb03
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

rpi3: Move shared rpi3 files into common directory

To be able to share code more easily between the existing Raspberry Pi 3
and the upcoming Raspberry Pi 4 platform, move some code which is not
boar

rpi3: Move shared rpi3 files into common directory

To be able to share code more easily between the existing Raspberry Pi 3
and the upcoming Raspberry Pi 4 platform, move some code which is not
board specific into a "common" directory.

Change-Id: I9211ab2d754b040128fac13c2f0a30a5cc8c7f2c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

Merge "Refactor ARMv8.3 Pointer Authentication support code" into integration

Merge "Modify FVP makefile for cores that support both AArch64/32" into integration