mediatek: mt8192: Fix non-MISRA compliant code

CID 364146: Control flow issues (DEADCODE)

Since the value of PSTATE_PWR_LVL_MASK and the value the of PLAT_MAX_PWR_LVL
are equal on mt8192, the follo

mediatek: mt8192: Fix non-MISRA compliant code

CID 364146: Control flow issues (DEADCODE)

Since the value of PSTATE_PWR_LVL_MASK and the value the of PLAT_MAX_PWR_LVL
are equal on mt8192, the following equation never hold.

if (aff_lvl > PLAT_MAX_PWR_LVL) {
return PSCI_E_INVALID_PARAMS;
}

Remove the deadcode to comply with MISRA standard.

Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: I71d0aa826eded8c3b5af961e733167ae40699398

show more ...

mediatek: mt8192: Fix non-MISRA compliant code

CID 364144: Integer handling issues (NO_EFFECT)

The unsigned value is always greater-than-or-equal-to-zero.
Remove such check.

Change-Id: Ia395eb32f5

mediatek: mt8192: Fix non-MISRA compliant code

CID 364144: Integer handling issues (NO_EFFECT)

The unsigned value is always greater-than-or-equal-to-zero.
Remove such check.

Change-Id: Ia395eb32f55a7098d2581ce7f548b7e1112beaa0
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>

show more ...

mediatek: mt8192: Add MPU support

1 Add Domain1(PCIe device) protect address: 0x80000000~0x83FF0000.
2 Add Domain2(SSPM/SPM/DPM/MCUPM) protect address: 0x40000000~0x1FFFF0000.

Signed-off-by: Xi Che

mediatek: mt8192: Add MPU support

1 Add Domain1(PCIe device) protect address: 0x80000000~0x83FF0000.
2 Add Domain2(SSPM/SPM/DPM/MCUPM) protect address: 0x40000000~0x1FFFF0000.

Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I4aaed37150076ae5943484c4adadac999a3d1762

show more ...

plat/arm/rdn2: update gic redistributor base address

RD-N2 platform has been updated to use six GIC ITS blocks. This results
in change in base address of the GIC Redistributor to accomodate two
new

plat/arm/rdn2: update gic redistributor base address

RD-N2 platform has been updated to use six GIC ITS blocks. This results
in change in base address of the GIC Redistributor to accomodate two
new GIC ITS blocks. Update the base address of GICR to reflect the same.

Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: I740a547328fb9a9f25d7a09c08e61bdbc8bf781c

show more ...

zynqmp: pm: Reimplement pinctrl get/set config parameter EEMI API calls

Functions are reimplemented to issue system-level pinctrl EEMI calls
to the PMU-FW rather than using MMIO read/write. Macros a

zynqmp: pm: Reimplement pinctrl get/set config parameter EEMI API calls

Functions are reimplemented to issue system-level pinctrl EEMI calls
to the PMU-FW rather than using MMIO read/write. Macros and functions
that appear to be unused after the change is made are removed.

Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I51f2285a79f202cb2ca9f031044002e16dd1e92f

show more ...

zynqmp: pm: Reimplement pinctrl set/get function EEMI API

Functions are reimplemented to issue system-level pinctrl EEMI calls
to the PMU-FW rather than using MMIO read/write. Macros and functions
t

zynqmp: pm: Reimplement pinctrl set/get function EEMI API

Functions are reimplemented to issue system-level pinctrl EEMI calls
to the PMU-FW rather than using MMIO read/write. Macros and functions
that appear to be unused after the change is made are removed.

Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I21b8fda855aa69090b85d6aaf411e19560201cb5

show more ...

zynqmp: pm: Implement pinctrl request/release EEMI API

The calls are just passed through to the PMU-FW. Before issuing
other pinctrl functions the pin should be successfully requested.

Signed-off-b

zynqmp: pm: Implement pinctrl request/release EEMI API

The calls are just passed through to the PMU-FW. Before issuing
other pinctrl functions the pin should be successfully requested.

Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Ibce280edebedf779b3962009c274d0b3d928e0e4

show more ...

zynqmp: pm: Update return type in query functions

In pm_query_data() function return type is stored in response so
there is no use of return type. Update return type of function
pm_query_data() from

zynqmp: pm: Update return type in query functions

In pm_query_data() function return type is stored in response so
there is no use of return type. Update return type of function
pm_query_data() from enum pm_ret_status to void. Similarly
update return type of pm_api_clock_get_name() and
pm_api_pinctrl_get_function_name() functions.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Id811926f0b4ebcc472480bb94f3b88109eb036cd

show more ...

plat: tc0: OP-TEE as S-EL1 SP with SPMC at S-EL2

This patch adds support to enable OP-TEE as S-EL1 SP with SPMC at S-EL2
- create SPMC manifest file with OP-TEE as SP
- add support for ARM

plat: tc0: OP-TEE as S-EL1 SP with SPMC at S-EL2

This patch adds support to enable OP-TEE as S-EL1 SP with SPMC at S-EL2
- create SPMC manifest file with OP-TEE as SP
- add support for ARM_SPMC_MANIFEST_DTS build option
- add optee entry with ffa as method in tc0.dts

Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Ia9b5c22c6f605d3886914bbac8ac45e8365671cb

show more ...

plat: tc0: enable opteed support

Enable SPD=opteed support for tc0 platform.

Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Ieb038d645c68fbe6b5a211c7279569e21b476fc3

allwinner: Use RSB for the PMIC connection on H6

RSB is faster and more efficient, and it has a simpler driver. As long
as the PMIC is returned to I2C mode after use, the rich OS can later use
eithe

allwinner: Use RSB for the PMIC connection on H6

RSB is faster and more efficient, and it has a simpler driver. As long
as the PMIC is returned to I2C mode after use, the rich OS can later use
either bus.

Change-Id: I0c5f32e88a090c8c5cccb81bd24596b301ab9da7
Signed-off-by: Samuel Holland <samuel@sholland.org>

show more ...

allwinner: Return the PMIC to I2C mode after use

This gives the rich OS the flexibility to choose between I2C and RSB
communication. Since a runtime address can only be assigned once after
entering

allwinner: Return the PMIC to I2C mode after use

This gives the rich OS the flexibility to choose between I2C and RSB
communication. Since a runtime address can only be assigned once after
entering RSB mode, it also lets the rich OS choose any runtime address.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Id49c124c5e925985fc31c0ba38c7fb6c941aafa8

show more ...

allwinner: Always use a 3MHz RSB bus clock

None of the other drivers (Linux, U-Boot, Crust) need to lower the bus
clock frequency to switch the PMIC to RSB mode. That logic is not needed
here, eithe

allwinner: Always use a 3MHz RSB bus clock

None of the other drivers (Linux, U-Boot, Crust) need to lower the bus
clock frequency to switch the PMIC to RSB mode. That logic is not needed
here, either. The hardware takes care of running this transaction at the
correct bus frequency.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Idcfe933df4da75d5fd5a4f3e362da40ac26bdad1

show more ...

allwinner: Enable workaround for Cortex-A53 erratum 1530924

BL31 reports the following warning during boot:

WARNING: BL31: cortex_a53: CPU workaround for 1530924 was missing!

Resolve this by ena

allwinner: Enable workaround for Cortex-A53 erratum 1530924

BL31 reports the following warning during boot:

WARNING: BL31: cortex_a53: CPU workaround for 1530924 was missing!

Resolve this by enabling the workaround on the affected platforms.

Change-Id: Ia1d5075370be5ae67b7bece96ec0069d9692b14c
Signed-off-by: Samuel Holland <samuel@sholland.org>

show more ...

allwinner: Fix non-default PRELOADED_BL33_BASE

While the Allwinner platform code nominally supported a custom
PRELOADED_BL33_BASE, some references to the BL33 load address used
another constant: PLA

allwinner: Fix non-default PRELOADED_BL33_BASE

While the Allwinner platform code nominally supported a custom
PRELOADED_BL33_BASE, some references to the BL33 load address used
another constant: PLAT_SUNXI_NS_IMAGE_OFFSET. To allow the DTB search
code to work if a U-Boot BL33 is loaded to a custom address,
consistently use PRELOADED_BL33_BASE. And to avoid this confusion in
the future, remove the other constant.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ie6b97ae1fdec95d784676aef39200bef161471b0

show more ...

allwinner: Add SPC security setup for H6

The H6 has a "secure port controller" similar to the A64/H5, but with
more ports and a different register layout. Split the platform-specific
parts out into

allwinner: Add SPC security setup for H6

The H6 has a "secure port controller" similar to the A64/H5, but with
more ports and a different register layout. Split the platform-specific
parts out into a header, and add the missing MMIO base address.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I3703868bc595459ecf9568b9d1605cb1be014bf5

show more ...

allwinner: Add R_PRCM security setup for H6

H6 has a reorganized R_PRCM compared to A64/H5, with the security switch
at a different offset. Until now, we did not notice, because the switch
has no ef

allwinner: Add R_PRCM security setup for H6

H6 has a reorganized R_PRCM compared to A64/H5, with the security switch
at a different offset. Until now, we did not notice, because the switch
has no effect unless the secure mode e-fuse is blown.

Since we are adding more platform-specific CCU registers, move them to
their own header, and out of the memory map (where they do not belong).

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ie77476db0515080954eaa2e32bf6c3de657cda86

show more ...

Merge changes from topic "rdevans" into integration

* changes:
doc: Update list of supported FVP platforms
board/rdn2: add board support for rdn2 platform
plat/arm/sgi: adapt to changes in mem

Merge changes from topic "rdevans" into integration

* changes:
doc: Update list of supported FVP platforms
board/rdn2: add board support for rdn2 platform
plat/arm/sgi: adapt to changes in memory map
plat/arm/sgi: add platform id value for rdn2 platform
plat/arm/sgi: platform definitions for upcoming platforms
plat/arm/sgi: refactor header file inclusions
plat/arm/sgi: refactor the inclusion of memory mapping

show more ...

plat: zynqmp: Disable ITAPDLYENA bit for zero ITAP delay

This patch disable the ITAPDLYENA bit for ITAP delay value zero.
As per IP design, it is recommended to disable the ITAPDLYENA bit
before aut

plat: zynqmp: Disable ITAPDLYENA bit for zero ITAP delay

This patch disable the ITAPDLYENA bit for ITAP delay value zero.
As per IP design, it is recommended to disable the ITAPDLYENA bit
before auto-tuning.
Also disable OTAPDLYENA bit always as there is one issue in RTL
where SD0_OTAPDLYENA has been wrongly connected to both SD0 and SD1
controllers. Hence it is recommended to disable OTAPDLYENA bit always
for both the controllers.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Acked-by: Srinivas Goud <srinivas.goud@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Icf035cb63510ac7bec4e9d523a622f145eaf0989

show more ...

plat: zynqmp: Check for DLL status before doing reset

This patch check for the DLL status before doing the DLL reset.
If DLL reset is already issued then skip the reset inside ATF
otherwise DLL rese

plat: zynqmp: Check for DLL status before doing reset

This patch check for the DLL status before doing the DLL reset.
If DLL reset is already issued then skip the reset inside ATF
otherwise DLL reset will be issued.
By doing this way, all the following cases will be supported.
1. Patched ATF + Patched Linux base.
2. Older ATF + Patched Linux base.
3. Patched ATF + Older Linux base.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I53a0a27521330f1543275cc9cb44cd1dfc569c65

show more ...

xilinx: versal: fix static failure

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Icef550072296d6aba89a0827dd72d0b86047556f

Merge changes from topic "versal-bug-fixes-and-new-apis" into integration

* changes:
plat: xilinx: versal: Add support of register notifier
plat: xilinx: versal: Add support to get clock rate va

Merge changes from topic "versal-bug-fixes-and-new-apis" into integration

* changes:
plat: xilinx: versal: Add support of register notifier
plat: xilinx: versal: Add support to get clock rate value
plat: xilinx: versal: Add support of set max latency for the device
plat: versal: Add InitFinalize API call
xilinx: versal: Updated Response of QueryData API call
plat:xilinx:versal: Use defaults when PDI is without sw partitions
plat: xilinx: Mask unnecessary bytes of return error code
xilinx: versal: Skip store/restore of GIC during CPU idle
plat: versal: Update API list in feature check
xilinx: versal: Do not pass ACPU0 always in set_wakeup_source()

show more ...

Merge changes from topic "secure_no_primary" into integration

* changes:
spm: provide number of vCPUs and VM size for first SP
spm: remove chosen node from SPMC manifests
spm: move OP-TEE SP m

Merge changes from topic "secure_no_primary" into integration

* changes:
spm: provide number of vCPUs and VM size for first SP
spm: remove chosen node from SPMC manifests
spm: move OP-TEE SP manifest DTS to FVP platform
spm: update OP-TEE SP manifest with device-regions node
spm: remove device-memory node from SPMC manifests

show more ...

board/rdn2: add board support for rdn2 platform

Add the initial board support for RD-N2 platform.

Change-Id: I8325885bf248dd92191d6fc92a2da91c23118f8c
Signed-off-by: Aditya Angadi <aditya.angadi@ar

board/rdn2: add board support for rdn2 platform

Add the initial board support for RD-N2 platform.

Change-Id: I8325885bf248dd92191d6fc92a2da91c23118f8c
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

show more ...

plat/arm/sgi: adapt to changes in memory map

Upcoming RD platforms will have an updated memory map for the various
pheripherals on the system. So, for the newer platforms, handle the
memory mapping

plat/arm/sgi: adapt to changes in memory map

Upcoming RD platforms will have an updated memory map for the various
pheripherals on the system. So, for the newer platforms, handle the
memory mapping and other platform specific functionality separately
from the existing platforms.

Change-Id: Iab1355a4c8ea1f6db4f79fcdd6eed907903b6a18
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

show more ...