feat(st-clock): add STM32MP2 clock driver

This driver manages the clocks on STM32MP2 platforms.
It uses a dedicated RCC (Reset and Clock Control) peripheral.

Change-Id: I6ba2173e73222269a2dfca4c689

feat(st-clock): add STM32MP2 clock driver

This driver manages the clocks on STM32MP2 platforms.
It uses a dedicated RCC (Reset and Clock Control) peripheral.

Change-Id: I6ba2173e73222269a2dfca4c6897229276a150c0
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>

show more ...

feat(st-reset): add system reset management

Add the system reset management into the stm32mp
reset driver.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I748f10de2398e1323160f479

feat(st-reset): add system reset management

Add the system reset management into the stm32mp
reset driver.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I748f10de2398e1323160f479f99e92abd2f65dca

show more ...

feat(st-gpio): add set GPIO config API

Add get and set GPIO level from bank and pin value.
Add functions to set a pad in GPIO configuration
and to apply some settings.

Change-Id: I5e3acb5c95cd03f3e

feat(st-gpio): add set GPIO config API

Add get and set GPIO level from bank and pin value.
Add functions to set a pad in GPIO configuration
and to apply some settings.

Change-Id: I5e3acb5c95cd03f3e130e1a263b221b956cb3c8d
Signed-off-by: Pascal Paillet <p.paillet@st.com>

show more ...

refactor(st-clock): remove unused clk function in API

Remove the unused functions in stm32mp clk API:
- stm32mp_stgen_get_counter (change to static, no more exported)
- stm32mp_stgen_restore_counter

refactor(st-clock): remove unused clk function in API

Remove the unused functions in stm32mp clk API:
- stm32mp_stgen_get_counter (change to static, no more exported)
- stm32mp_stgen_restore_counter

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Ib6ca72723eac3e133f1ca0dee504ef344c72e0bf

show more ...

feat(st-clock): add function to restore generic timer rate

Add a function to restore the CPU generic timer rate from STGEN content.
After wake-up from LPLV-Stop2, STGEN content is not lost, but gene

feat(st-clock): add function to restore generic timer rate

Add a function to restore the CPU generic timer rate from STGEN content.
After wake-up from LPLV-Stop2, STGEN content is not lost, but generic timer
has been reset.

Signed-off-by: Pascal Paillet <p.paillet@st.com>
Change-Id: I6f91dbd051f76383e9ff1d6bb86225d373dbf33a

show more ...

feat(st-clock): add function to control MCU subsystem

Add a new function to control the MCU subsystem
security state.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I070eec06fc93a

feat(st-clock): add function to control MCU subsystem

Add a new function to control the MCU subsystem
security state.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I070eec06fc93a1214227f25a6a4f1c40c66c86b0

show more ...

Merge "refactor(st-i2c): use fdt_read_uint32_default()" into integration

feat(st-bsec): add driver for the new IP version BSEC3

This driver is used for the new version of the BSEC peripheral used
on STM32MP25.

Change-Id: I38ca0db22d06704769c994c6806ccd80b17dde6e
Signed-

feat(st-bsec): add driver for the new IP version BSEC3

This driver is used for the new version of the BSEC peripheral used
on STM32MP25.

Change-Id: I38ca0db22d06704769c994c6806ccd80b17dde6e
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

show more ...

refactor(st-i2c): use fdt_read_uint32_default()

The function stm32_i2c_get_setup_from_fdt() was using fdt_getprop() to
to get some i2c node properties, and set a default value if the node
was not fo

refactor(st-i2c): use fdt_read_uint32_default()

The function stm32_i2c_get_setup_from_fdt() was using fdt_getprop() to
to get some i2c node properties, and set a default value if the node
was not found. The function fdt_read_uint32_default() already does
this in a simpler way.
Remove useless STM32_I2C_SPEED_DEFAULT.

Change-Id: I74c6295bb5765ee7c7e0a9ae020b741f1fe022a6
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

refactor(st-bsec): improve BSEC driver

In order to ease the introduction of a new BSEC3 driver for STM32MP25,
the BSEC2 driver is reworked. Unused functions are removed. The
bsec_base global variabl

refactor(st-bsec): improve BSEC driver

In order to ease the introduction of a new BSEC3 driver for STM32MP25,
the BSEC2 driver is reworked. Unused functions are removed. The
bsec_base global variable is removed in favor of the macro BSEC_BASE.
A rework is also done around function checking the state of BSEC.

Change-Id: I1ad76cb67333ab9a8fa1d65db34d74a712bf1190
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

fix(st-ddr): express memory size with size_t type

Express memory size with size_t type in structures.
Retrieve value as uint32_t from device tree and then cast it to size_t.
Combined with uintptr_t

fix(st-ddr): express memory size with size_t type

Express memory size with size_t type in structures.
Retrieve value as uint32_t from device tree and then cast it to size_t.
Combined with uintptr_t use, it ensures a generic algorithm whatever
the platform architecture, notably within systematic tests. Adapt also
their prototypes.

Move memory size print outside stm32mp_ddr_check_size() to adapt it to
related platform.

Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: Ic6e1a62d7a5e23cef49909a658098c800e7dae3f

show more ...

feat(st): add RCC registers list

Add a header file listing the registers of Reset and Clock Control
peripheral.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Icc90132d5782eba7e343868

feat(st): add RCC registers list

Add a header file listing the registers of Reset and Clock Control
peripheral.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Icc90132d5782eba7e343868b932a399c1d47c18a

show more ...

fix(st-crypto): move flag control into source code

Remove the control from the include file to avoid compilation
issue. Add the check in the source code instead.

Signed-off-by: Lionel Debieve <lion

fix(st-crypto): move flag control into source code

Remove the control from the include file to avoid compilation
issue. Add the check in the source code instead.

Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: I533f829607f76389399a3e8dbc3c6095278562ab

show more ...