feat(versal): deprecate build time arg VERSAL_PLATFORM

Update Versal platform to enable runtime detection of variants instead
of relying on the build argument VERSAL_PLATFORM.
Integrate functionalit

feat(versal): deprecate build time arg VERSAL_PLATFORM

Update Versal platform to enable runtime detection of variants instead
of relying on the build argument VERSAL_PLATFORM.
Integrate functionality for identifying the board variant during
runtime, allowing dynamic adjustment of CPU and UART clock values
accordingly.
Print the runtime board information during boot.
This advancement streamlines the build process by eliminating
dependencies on variant-specific builds, enabling the use of a single
binary for multiple variants.
Removing all the platform related constants for versal_virt,SPP,EMU as
they are not used.

Change-Id: I8c1a1d391bd1a8971addc1f56f8309a3fb75aa6d
Signed-off-by: Amey Avinash Raghatate <AmeyAvinash.Raghatate@amd.com>
Signed-off-by: Maheedhar Bollapalli <MaheedharSai.Bollapalli@amd.com>

show more ...

Merge "feat(fgt2): add support for FEAT_FGT2" into integration

Merge "feat(debugv8p9): add support for FEAT_Debugv8p9" into integration

feat(fgt2): add support for FEAT_FGT2

This patch disables trapping to EL3 when the FEAT_FGT2
specific trap registers are accessed by setting the
SCR_EL3.FGTEn2 bit

Signed-off-by: Arvind Ram Prakash

feat(fgt2): add support for FEAT_FGT2

This patch disables trapping to EL3 when the FEAT_FGT2
specific trap registers are accessed by setting the
SCR_EL3.FGTEn2 bit

Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I6d2b614affb9067b2bc3d7bf0ae7d169d031592a

show more ...

feat(debugv8p9): add support for FEAT_Debugv8p9

This patch enables FEAT_Debugv8p9 and prevents EL1/0 from
trapping to EL3 when accessing MDSELR_EL1 register by
setting the MDCR_EL3.EBWE bit.

Signed

feat(debugv8p9): add support for FEAT_Debugv8p9

This patch enables FEAT_Debugv8p9 and prevents EL1/0 from
trapping to EL3 when accessing MDSELR_EL1 register by
setting the MDCR_EL3.EBWE bit.

Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I3613af1dd8cb8c0d3c33dc959f170846c0b9695a

show more ...

fix(docs): fix CPU type for mt8195

MT8195 features four Cortex-A78 cores not Cortex-A76.

Change-Id: I62c60373e7a3e570bcadaeaf065ca0f7473cb838
Signed-off-by: Yidi Lin <yidilin@chromium.org>

Merge changes from topic "stm32mp2_doc_update" into integration

* changes:
feat(docs): add STM32MP2 docs links
docs(stm32mp2): correct STM32MP2 frequencies

Merge "refactor(docs): update RSE docs to match the example CCA token" into integration

feat(docs): add STM32MP2 docs links

Add links to official STMicroelectronics documentation (STM32MP2
series presentation and wiki).

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id:

feat(docs): add STM32MP2 docs links

Add links to official STMicroelectronics documentation (STM32MP2
series presentation and wiki).

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I2fca0da56bc6064c222df34493921dff3e119a22

show more ...

docs(stm32mp2): correct STM32MP2 frequencies

STM32MP25xA & STM32MP25xC versions run at 1.2GHz.

Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I75aea682c8e3fa89e7ac1347bb7f9d02

docs(stm32mp2): correct STM32MP2 frequencies

STM32MP25xA & STM32MP25xC versions run at 1.2GHz.

Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I75aea682c8e3fa89e7ac1347bb7f9d02f2086222

show more ...

Merge changes from topic "add_s32cc_clk_skeleton" into integration

* changes:
feat(s32g274a): use s32cc clock driver
feat(nxp-drivers): add clock skeleton for s32cc

feat(nxp-drivers): add clock skeleton for s32cc

The S32CC is an umbrella for S32G2, S32G3 and S32R45 SoCs; therefore,
this clock driver will be used for all of these families.

Change-Id: Iede5371b2

feat(nxp-drivers): add clock skeleton for s32cc

The S32CC is an umbrella for S32G2, S32G3 and S32R45 SoCs; therefore,
this clock driver will be used for all of these families.

Change-Id: Iede5371b212b67cf494a033c62fbfdcbe9b1a879
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

docs(fvp): update FVP versions used

Patch series:
https://review.trustedfirmware.org/q/hashtag:%22fvp_migration_11_26%22+(status:open%20OR%20status:merged)

Migrated FVP's to use version 11.26.11 an

docs(fvp): update FVP versions used

Patch series:
https://review.trustedfirmware.org/q/hashtag:%22fvp_migration_11_26%22+(status:open%20OR%20status:merged)

Migrated FVP's to use version 11.26.11 and 11.24.24, also removed
some model testing that are now no more available with newer model
configuration.

Change-Id: Ib93a7148270e2b6fb356a631dcc36061c7c8341c
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>

show more ...

Merge "feat(versal2): add support for AMD Versal Gen 2 platform" into integration

Merge changes from topic "st-nand-backup-fwu" into integration

* changes:
refactor(st): rename plat_set_image_source
feat(st): add FWU with boot from NAND
feat(st): manage backup partitions fo

Merge changes from topic "st-nand-backup-fwu" into integration

* changes:
refactor(st): rename plat_set_image_source
feat(st): add FWU with boot from NAND
feat(st): manage backup partitions for NAND devices
feat(bl): add plat handler for image loading
refactor(bl)!: remove unused plat_try_next_boot_source

show more ...

refactor(docs): update RSE docs to match the example CCA token

The RSE documentation includes binary and JSON dumps of the CCA platform
token. This change updates those to match the example CCA pla

refactor(docs): update RSE docs to match the example CCA token

The RSE documentation includes binary and JSON dumps of the CCA platform
token. This change updates those to match the example CCA platform
token from [1], which is also the one returned by the TC and QEMU
platforms.

[1] https://review.trustedfirmware.org/c/TF-M/tf-m-tools/+/28493

Change-Id: I21048e7f995eb24212cf62fb2128b576bc11ecff
Signed-off-by: Thomas Fossati <thomas.fossati@linaro.org>

show more ...

build: unify verbosity handling

This change introduces a few helper variables for dealing with verbose
and silent build modes: `silent`, `verbose`, `q` and `s`.

The `silent` and `verbose` variables

build: unify verbosity handling

This change introduces a few helper variables for dealing with verbose
and silent build modes: `silent`, `verbose`, `q` and `s`.

The `silent` and `verbose` variables are boolean values determining
whether the build system has been configured to run silently or
verbosely respectively (i.e. with `--silent` or `V=1`).

These two modes cannot be used together - if `silent` is truthy then
`verbose` is always falsy. As such:

make --silent V=1

... results in a silent build.

In addition to these boolean variables, we also introduce two new
variables - `s` and `q` - for use in rule recipes to conditionally
suppress the output of commands.

When building silently, `s` expands to a value which disables the
command that follows, and `q` expands to a value which supppresses
echoing of the command:

$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed but not echoed'

When building verbosely, `s` expands to a value which disables the
command that follows, and `q` expands to nothing:

$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed and echoed'

In all other cases, both `s` and `q` expand to a value which suppresses
echoing of the command that follows:

$(s)echo 'This command is executed but not echoed'
$(q)echo 'This command is executed but not echoed'

The `s` variable is predominantly useful for `echo` commands, where you
always want to suppress echoing of the command itself, whilst `q` is
more useful for all other commands.

Change-Id: I8d8ff6ed714d3cb401946c52955887ed7dca602b
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

Merge "docs: update Cortex-A32 FVP model version" into integration

docs: update Cortex-A32 FVP model version

Change [1] migrated Cortex-A32 FVP model to the default version used in
the TF-A CI.

[1] https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/29297

S

docs: update Cortex-A32 FVP model version

Change [1] migrated Cortex-A32 FVP model to the default version used in
the TF-A CI.

[1] https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/29297

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I038087af957d3ee2b289944b4af1a8cffb1ec5ff

show more ...

fix(docs): replace "ARM-TF" with "TF-A" in diagrams

Two diagrams in the documentation contained the string "ARM TF", which
is probably a remainder of the older "ARM Trusted Firmware" name.
Replace t

fix(docs): replace "ARM-TF" with "TF-A" in diagrams

Two diagrams in the documentation contained the string "ARM TF", which
is probably a remainder of the older "ARM Trusted Firmware" name.
Replace that with "TF-A", which is now the more widely known name for
Trusted Firmware.
This was done with an image editing program, by just moving the letters
around, as I didn't find any source for that image.

Change-Id: I1fa18341b3aa8fc8c4ecc8988bf4de66e473caa7
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

feat(bl): add plat handler for image loading

In case of load error, platform may need to try another instance, either
from another storage, or from the same storage in case of PSA FWU. On
MTD device

feat(bl): add plat handler for image loading

In case of load error, platform may need to try another instance, either
from another storage, or from the same storage in case of PSA FWU. On
MTD devices such as NAND, it is required to define backup partitions.
A new function plat_setup_try_img_ops() should be called by platform
code to register handlers (plat_try_images_ops) to manage loading
other images.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: Ideaecaf296c0037a26fb4e6680f33e507111378a

show more ...

refactor(bl)!: remove unused plat_try_next_boot_source

The plat_try_next_boot_source() API is not used by any upstream platform
and not used by platforms that asked for this API. It is then removed.

refactor(bl)!: remove unused plat_try_next_boot_source

The plat_try_next_boot_source() API is not used by any upstream platform
and not used by platforms that asked for this API. It is then removed.
It will be replaced with a more generic interface in next patch.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I298c7acace8c5efb3c66422d8d9280ecd08e5ade

show more ...

feat(versal2): add support for AMD Versal Gen 2 platform

New SoC is a78 based with gicv3 and uart over pl011. Communication
interfaces are similar to Versal NET platform. System starts with AMD PLM

feat(versal2): add support for AMD Versal Gen 2 platform

New SoC is a78 based with gicv3 and uart over pl011. Communication
interfaces are similar to Versal NET platform. System starts with AMD PLM
firmware which loads TF-A(bl31) to memory, which is already configured, and
jumps to it. PLM also prepare handoff structure for TF-A with information
what components were load and flags which indicate which EL level SW should
be started.

Change-Id: I5065b1b7ec4ee58e77dc4096747758480c84009c
Signed-off-by: Amit Nagal <amit.nagal@amd.com>
Signed-off-by: Akshay Belsare <akshay.belsare@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>

show more ...

feat(rockchip): add RK3566/RK3568 Socs support

RK3566/RK3568 is a Quad-core soc and Cortex-a55 inside.
This patch supports the following functions:
1. basic platform setup
2. power up/off cpus
3. su

feat(rockchip): add RK3566/RK3568 Socs support

RK3566/RK3568 is a Quad-core soc and Cortex-a55 inside.
This patch supports the following functions:
1. basic platform setup
2. power up/off cpus
3. suspend/resume cpus
4. suspend/resume system
5. reset system

Signed-off-by: shengfei Xu <xsf@rock-chips.com>
Change-Id: I8b98a4d07664de26bd6078f63664cbc3d9c1c68c

show more ...

Merge "docs(gpt): update GPT library documentation" into integration