| /optee_os/core/arch/arm/plat-bcm/ |
| H A D | bcm_elog.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/drivers/ |
| H A D | amlogic_uart.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | bcm_hwrng.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | atmel_uart.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | bcm_sotp.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | bcm_gpio.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | sp805_wdt.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | mvebu_uart.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/arch/arm/plat-rzn1/ |
| H A D | psci.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | sm_platform_handler.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/arch/arm/plat-rockchip/ |
| H A D | platform_px30.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | platform_rk3399.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | platform_rk322x.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/pta/bcm/ |
| H A D | elog.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/drivers/bnxt/ |
| H A D | bnxt.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | bnxt_images.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | bnxt_fw.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/drivers/crypto/caam/hal/imx_6_7/ |
| H A D | hal_clk_mx6.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | hal_clk_mx7ulp.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| H A D | hal_clk_mx7.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/include/drivers/ |
| H A D | sp805_wdt.h | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/arch/arm/plat-stm32mp1/ |
| H A D | plat_tzc400.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/include/mm/ |
| H A D | core_memprot.h | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/arch/arm/sm/ |
| H A D | pm.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|
| /optee_os/core/arch/arm/plat-marvell/armada3700/ |
| H A D | hal_sec_perf.c | c2e4eb43b7b7211345cd38ceceac97773bd78d2c Sun May 23 16:59:19 UTC 2021 Anton Rybakov <a.rybakov@omp.ru> core_mmu: fix phys_to_virt() to check length
phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.
core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.
Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)
|