core_mmu: fix phys_to_virt() to check length

phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because

core_mmu: fix phys_to_virt() to check length

phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.

core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.

Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)

show more ...

core: rename KEEP_INIT() and KEEP_PAGER()

The KEEP_INIT() and KEEP_PAGER() macros are quite often used in C files
immediately after the definition of a function or a structure without a
blank line i

core: rename KEEP_INIT() and KEEP_PAGER()

The KEEP_INIT() and KEEP_PAGER() macros are quite often used in C files
immediately after the definition of a function or a structure without a
blank line in between. This style mimics what the Linux kernel does for
a similar use cases: EXPORT_SYMBOL().

Unfortunately, the checkpatch.pl tool expects a blank line after
structure and function definitions, except for a few special cases such
as EXPORT_SYMBOL(). As a result we often get unwanted warnings when we
use KEEP_INIT() and KEEP_PAGER(). Among the exceptions are all words
starting with DECLARE_ or DEFINE_, so by renaming our macros we could
avoid the checkpatch warnings.

This commit renames KEEP_INIT() and KEEP_PAGER() to DECLARE_KEEP_INIT()
and DECLARE_KEEP_PAGER(), respectively. The assembler macros are also
renamed for consistency. No functional change is expected.

Signed-off-by: Jerome Forissier <jerome@forissier.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

core: upgrade from write32() to io_write32() and friends

Replace use of readX() and writeX() with io_readX() and io_writeX().
The former function are about to be deprecated in favor to the later.

T

core: upgrade from write32() to io_write32() and friends

Replace use of readX() and writeX() with io_readX() and io_writeX().
The former function are about to be deprecated in favor to the later.

This change upgrades core generic code and drivers.
At some place, io_clrbitsX(), io_setbitsX() and io_clrsetbitsX()
replace the writeX(readX() ...) operations when obvious.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

Add SPDX license identifiers

Adds one SPDX-License-Identifier line [1] to each source files that
contains license text.

Generated by [2]:
spdxify.py --add-spdx optee_os/

The scancode tool [3] wa

Add SPDX license identifiers

Adds one SPDX-License-Identifier line [1] to each source files that
contains license text.

Generated by [2]:
spdxify.py --add-spdx optee_os/

The scancode tool [3] was used to double check the license matching
code in the Python script. All the licenses detected by scancode are
either detected by spdxify.py, or have no SPDX identifier, or are false
matches.

Link: [1] https://spdx.org/licenses/
Link: [2] https://github.com/jforissier/misc/blob/f7b56c8/spdxify.py
Link: [3] https://github.com/nexB/scancode-toolkit
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Joakim Bech <joakim.bech@linaro.org>

show more ...

plat-marvell: Add initial support for ARMADA3700

Only test 64bit mode with default configuration

1. Build command
make PLATFORM=marvell-armada3700
2. Pass xtest

Signed-off-by: wangwen <wangwen

plat-marvell: Add initial support for ARMADA3700

Only test 64bit mode with default configuration

1. Build command
make PLATFORM=marvell-armada3700
2. Pass xtest

Signed-off-by: wangwen <wangwen@marvell.comi>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Kevin Peng <kevinp@marvell.com>

show more ...