mpc8641: Change 32-bit memory map

The memory map on the 8641hpcn is modified to look more like
the 85xx boards; this is a step towards a more standardized
layout going forward. As part of this chang

mpc8641: Change 32-bit memory map

The memory map on the 8641hpcn is modified to look more like
the 85xx boards; this is a step towards a more standardized
layout going forward. As part of this change, we now relocate
the flash.

The regions for some of the mappings were far larger than they
needed to be. I have reduced the mappings to match the
actual sizes supported by the hardware.

In addition I have removed the comments at the head
of the BAT blocks in the config file, rather than updating
them. These get horribly out of date, and it's a simple
matter to look at the defines to see what they are set to
since everything is right here in the same file.

Documentation has been changed to reflect the new map, as this
change is user visible, and affects the OS which runs post-uboot.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

show more ...

mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY

We define CONFIG_MONITOR_BASE_EARLY to define the initial location
of the bootpage in flash. Use this to create an early mapp

mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY

We define CONFIG_MONITOR_BASE_EARLY to define the initial location
of the bootpage in flash. Use this to create an early mapping
definition for the FLASH, and change the early_bats code to use this.

This change facilitates the relocation of the flash since the early
mappings are no longer tied to the final location of the flash.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

show more ...

mpc8641: make DIAG_ADDR == FLASH_BASE

Currently, that's what it is, but it's hardcoded.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

mpc8641: Drop imaginary second flash bank, map 8MB

There's a lot of setup and foo for the second flash
bank. The problem is, this board doesn't actually have one.
Clean this up. Also, the flash is

mpc8641: Drop imaginary second flash bank, map 8MB

There's a lot of setup and foo for the second flash
bank. The problem is, this board doesn't actually have one.
Clean this up. Also, the flash is 8M in size. Get rid
of the confusing aliased overmapping, and just map 8M.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

show more ...

mpc8641: only define CONFIG_ENV_SIZE once

It's currently defined twice inside in an if/else block, but
both halves set the same value. Move the define outside
the if.

Signed-off-by: Becky Bruce <b

mpc8641: only define CONFIG_ENV_SIZE once

It's currently defined twice inside in an if/else block, but
both halves set the same value. Move the define outside
the if.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

show more ...

mpc8641: Remove extra "0" from BR2 define

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

powerpc: change 86xx SMP boot method

We put the bootpg for the secondary cpus into memory and use
BPTR to get to it. This is a step towards converting to the
ePAPR boot methodology. Also, the code

powerpc: change 86xx SMP boot method

We put the bootpg for the secondary cpus into memory and use
BPTR to get to it. This is a step towards converting to the
ePAPR boot methodology. Also, the code is written to
deal properly with more than 4GB of RAM.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

show more ...

8641HPCN: Config file cleanup

There are several items in the config file that were hardcoded
but that should really be based on other config options, since
the regions are contiguous and depend on b

8641HPCN: Config file cleanup

There are several items in the config file that were hardcoded
but that should really be based on other config options, since
the regions are contiguous and depend on being so. This cleans
that up a bit. Also, add BR_PHYS_ADDR() macro to convert
addresses into the proper format for BR registers.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

show more ...

mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build

You can't actually have both, and with some coming changes to
change the memory map for the board and support 36-bit physical,
we need

mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build

You can't actually have both, and with some coming changes to
change the memory map for the board and support 36-bit physical,
we need the extra BAT that is being consumed by having both.

I also make non-PCI configs build cleanly, for the sake of sanity.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

show more ...

mpc8641: Stop supporting non-PCI_PNP configs

We don't actually ever do this, remove the code so we
can stop maintaining it.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

Merge branch 'master' of git://git.denx.de/u-boot-mpc86xx

86xx: remove the unused definition

Signed-off-by: Dave Liu <daveliu@freescale.com>

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

86xx: Convert all fsl_pci_init users to new APIs

Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().

With these changes the board code is

86xx: Convert all fsl_pci_init users to new APIs

Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().

With these changes the board code is a bit smaller and we get dma-ranges
set in the device tree for these boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>

show more ...

86xx: Enable 64-bit PCI resources on all Freescale boards

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>

Merge branch 'master' of /home/stefan/git/u-boot/u-boot

Merge git://git.denx.de/u-boot into x1

Conflicts:

drivers/usb/usb_ohci.c

Merge 'next' branch

Conflicts:

board/freescale/mpc8536ds/mpc8536ds.c
include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'Makefile-next' of git://git.denx.de/u-boot-arm

rename CFG_ENV macros to CONFIG_ENV

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

cmd_mac: Move conditional compilation to Makefile

finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
start in commit ad8f8687b78c3e917b173f038926695383c55555

Signed-off-by: Jean-Christophe PLAGNIOL-

cmd_mac: Move conditional compilation to Makefile

finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
start in commit ad8f8687b78c3e917b173f038926695383c55555

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

show more ...