1 /* 2 * Copyright 2006 Freescale Semiconductor. 3 * 4 * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 /* 26 * MPC8641HPCN board configuration file 27 * 28 * Make sure you change the MAC address and other network params first, 29 * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. 30 */ 31 32 #ifndef __CONFIG_H 33 #define __CONFIG_H 34 35 /* High Level Configuration Options */ 36 #define CONFIG_MPC86xx 1 /* MPC86xx */ 37 #define CONFIG_MPC8641 1 /* MPC8641 specific */ 38 #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ 39 #define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ 40 #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ 41 42 #ifdef RUN_DIAG 43 #define CONFIG_SYS_DIAG_ADDR 0xff800000 44 #endif 45 46 #define CONFIG_SYS_RESET_ADDRESS 0xfff00100 47 48 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 49 #define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */ 50 #define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */ 51 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 52 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 53 #define CONFIG_FSL_LAW 1 /* Use common FSL law init code */ 54 55 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 56 #define CONFIG_ENV_OVERWRITE 57 58 #define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ 59 60 #define CONFIG_ALTIVEC 1 61 62 /* 63 * L2CR setup -- make sure this is right for your board! 64 */ 65 #define CONFIG_SYS_L2 66 #define L2_INIT 0 67 #define L2_ENABLE (L2CR_L2E) 68 69 #ifndef CONFIG_SYS_CLK_FREQ 70 #ifndef __ASSEMBLY__ 71 extern unsigned long get_board_sys_clk(unsigned long dummy); 72 #endif 73 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) 74 #endif 75 76 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 77 78 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ 79 #define CONFIG_SYS_MEMTEST_END 0x00400000 80 81 /* 82 * Base addresses -- Note these are effective addresses where the 83 * actual resources get mapped (not physical addresses) 84 */ 85 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 86 #define CONFIG_SYS_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ 87 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ 88 89 #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) 90 #define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) 91 92 /* 93 * DDR Setup 94 */ 95 #define CONFIG_FSL_DDR2 96 #undef CONFIG_FSL_DDR_INTERACTIVE 97 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 98 #define CONFIG_DDR_SPD 99 100 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 101 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 102 103 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 104 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 105 #define CONFIG_VERY_BIG_RAM 106 107 #define MPC86xx_DDR_SDRAM_CLK_CNTL 108 109 #define CONFIG_NUM_DDR_CONTROLLERS 2 110 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 111 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 112 113 /* 114 * I2C addresses of SPD EEPROMs 115 */ 116 #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ 117 #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 0 DIMM 1 */ 118 #define SPD_EEPROM_ADDRESS3 0x53 /* CTLR 1 DIMM 0 */ 119 #define SPD_EEPROM_ADDRESS4 0x54 /* CTLR 1 DIMM 1 */ 120 121 122 /* 123 * These are used when DDR doesn't use SPD. 124 */ 125 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ 126 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F 127 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ 128 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 129 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 130 #define CONFIG_SYS_DDR_TIMING_1 0x39357322 131 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 132 #define CONFIG_SYS_DDR_MODE_1 0x00480432 133 #define CONFIG_SYS_DDR_MODE_2 0x00000000 134 #define CONFIG_SYS_DDR_INTERVAL 0x06090100 135 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 136 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 137 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 138 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 139 #define CONFIG_SYS_DDR_CONTROL 0xe3008000 /* Type = DDR2 */ 140 #define CONFIG_SYS_DDR_CONTROL2 0x04400000 141 142 #define CONFIG_ID_EEPROM 143 #define CONFIG_SYS_I2C_EEPROM_NXID 144 #define CONFIG_ID_EEPROM 145 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 146 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 147 148 /* 149 * In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000. 150 * There is an 8MB flash. In effect, the addresses from fe000000 to fe7fffff 151 * map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff. 152 * However, when u-boot comes up, the flash_init needs hard start addresses 153 * to build its info table. For user convenience, the flash addresses is 154 * fe800000 and ff800000. That way, u-boot knows where the flash is 155 * and the user can download u-boot code from promjet to fef00000, a 156 * more intuitive location than fe700000. 157 * 158 * Note that, on switching the boot location, fef00000 becomes fff00000. 159 */ 160 #define CONFIG_SYS_FLASH_BASE 0xfe800000 /* start of FLASH 32M */ 161 #define CONFIG_SYS_FLASH_BASE2 0xff800000 162 163 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} 164 165 #define CONFIG_SYS_BR0_PRELIM 0xff001001 /* port size 16bit */ 166 #define CONFIG_SYS_OR0_PRELIM 0xff006ff7 /* 16MB Boot Flash area*/ 167 168 #define CONFIG_SYS_BR1_PRELIM 0xfe001001 /* port size 16bit */ 169 #define CONFIG_SYS_OR1_PRELIM 0xff006ff7 /* 16MB Alternate Boot Flash area*/ 170 171 #define CONFIG_SYS_BR2_PRELIM 0xf8201001 /* port size 16bit */ 172 #define CONFIG_SYS_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/ 173 174 #define CONFIG_SYS_BR3_PRELIM 0xf8100801 /* port size 8bit */ 175 #define CONFIG_SYS_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ 176 177 178 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 179 #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ 180 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 181 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 182 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 183 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 184 #define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */ 185 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 186 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 187 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 188 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 189 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 190 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 191 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 192 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 193 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 194 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ 195 196 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 197 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ 198 199 #undef CONFIG_SYS_FLASH_CHECKSUM 200 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 201 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 202 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ 203 204 #define CONFIG_FLASH_CFI_DRIVER 205 #define CONFIG_SYS_FLASH_CFI 206 #define CONFIG_SYS_FLASH_EMPTY_INFO 207 208 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 209 #define CONFIG_SYS_RAMBOOT 210 #else 211 #undef CONFIG_SYS_RAMBOOT 212 #endif 213 214 #if defined(CONFIG_SYS_RAMBOOT) 215 #undef CONFIG_SPD_EEPROM 216 #define CONFIG_SYS_SDRAM_SIZE 256 217 #endif 218 219 #undef CONFIG_CLOCKS_IN_MHZ 220 221 #define CONFIG_L1_INIT_RAM 222 #define CONFIG_SYS_INIT_RAM_LOCK 1 223 #ifndef CONFIG_SYS_INIT_RAM_LOCK 224 #define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ 225 #else 226 #define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ 227 #endif 228 #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ 229 230 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ 231 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 232 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 233 234 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 235 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 236 237 /* Serial Port */ 238 #define CONFIG_CONS_INDEX 1 239 #undef CONFIG_SERIAL_SOFTWARE_FIFO 240 #define CONFIG_SYS_NS16550 241 #define CONFIG_SYS_NS16550_SERIAL 242 #define CONFIG_SYS_NS16550_REG_SIZE 1 243 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 244 245 #define CONFIG_SYS_BAUDRATE_TABLE \ 246 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 247 248 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 249 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 250 251 /* Use the HUSH parser */ 252 #define CONFIG_SYS_HUSH_PARSER 253 #ifdef CONFIG_SYS_HUSH_PARSER 254 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 255 #endif 256 257 /* 258 * Pass open firmware flat tree to kernel 259 */ 260 #define CONFIG_OF_LIBFDT 1 261 #define CONFIG_OF_BOARD_SETUP 1 262 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 263 264 265 #define CONFIG_SYS_64BIT_VSPRINTF 1 266 #define CONFIG_SYS_64BIT_STRTOUL 1 267 268 /* 269 * I2C 270 */ 271 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 272 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 273 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 274 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 275 #define CONFIG_SYS_I2C_SLAVE 0x7F 276 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 277 #define CONFIG_SYS_I2C_OFFSET 0x3100 278 279 /* 280 * RapidIO MMU 281 */ 282 #define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */ 283 #define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE 284 #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ 285 286 /* 287 * General PCI 288 * Addresses are mapped 1-1. 289 */ 290 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 291 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 292 #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ 293 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 294 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 295 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ 296 297 /* For RTL8139 */ 298 #define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) 299 #define _IO_BASE 0x00000000 300 301 #define CONFIG_SYS_PCI2_MEM_BASE 0xa0000000 302 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 303 #define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */ 304 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 305 #define CONFIG_SYS_PCI2_IO_PHYS 0xe3000000 306 #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ 307 308 #if defined(CONFIG_PCI) 309 310 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 311 312 #undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE 313 314 #define CONFIG_NET_MULTI 315 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 316 317 #define CONFIG_RTL8139 318 319 #undef CONFIG_EEPRO100 320 #undef CONFIG_TULIP 321 322 /************************************************************ 323 * USB support 324 ************************************************************/ 325 #define CONFIG_PCI_OHCI 1 326 #define CONFIG_USB_OHCI_NEW 1 327 #define CONFIG_USB_KEYBOARD 1 328 #define CONFIG_SYS_DEVICE_DEREGISTER 329 #define CONFIG_SYS_USB_EVENT_POLL 1 330 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci" 331 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 332 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1 333 334 /*PCIE video card used*/ 335 #define VIDEO_IO_OFFSET CONFIG_SYS_PCI2_IO_PHYS 336 337 /*PCI video card used*/ 338 /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_PHYS*/ 339 340 /* video */ 341 #define CONFIG_VIDEO 342 343 #if defined(CONFIG_VIDEO) 344 #define CONFIG_BIOSEMU 345 #define CONFIG_CFB_CONSOLE 346 #define CONFIG_VIDEO_SW_CURSOR 347 #define CONFIG_VGA_AS_SINGLE_DEVICE 348 #define CONFIG_ATI_RADEON_FB 349 #define CONFIG_VIDEO_LOGO 350 /*#define CONFIG_CONSOLE_CURSOR*/ 351 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCI2_IO_PHYS 352 #endif 353 354 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 355 356 #define CONFIG_DOS_PARTITION 357 #define CONFIG_SCSI_AHCI 358 359 #ifdef CONFIG_SCSI_AHCI 360 #define CONFIG_SATA_ULI5288 361 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 362 #define CONFIG_SYS_SCSI_MAX_LUN 1 363 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) 364 #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE 365 #endif 366 367 #define CONFIG_MPC86XX_PCI2 368 369 #endif /* CONFIG_PCI */ 370 371 #if defined(CONFIG_TSEC_ENET) 372 373 #ifndef CONFIG_NET_MULTI 374 #define CONFIG_NET_MULTI 1 375 #endif 376 377 #define CONFIG_MII 1 /* MII PHY management */ 378 379 #define CONFIG_TSEC1 1 380 #define CONFIG_TSEC1_NAME "eTSEC1" 381 #define CONFIG_TSEC2 1 382 #define CONFIG_TSEC2_NAME "eTSEC2" 383 #define CONFIG_TSEC3 1 384 #define CONFIG_TSEC3_NAME "eTSEC3" 385 #define CONFIG_TSEC4 1 386 #define CONFIG_TSEC4_NAME "eTSEC4" 387 388 #define TSEC1_PHY_ADDR 0 389 #define TSEC2_PHY_ADDR 1 390 #define TSEC3_PHY_ADDR 2 391 #define TSEC4_PHY_ADDR 3 392 #define TSEC1_PHYIDX 0 393 #define TSEC2_PHYIDX 0 394 #define TSEC3_PHYIDX 0 395 #define TSEC4_PHYIDX 0 396 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 397 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 398 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 399 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 400 401 #define CONFIG_ETHPRIME "eTSEC1" 402 403 #endif /* CONFIG_TSEC_ENET */ 404 405 /* 406 * BAT0 2G Cacheable, non-guarded 407 * 0x0000_0000 2G DDR 408 */ 409 #define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) 410 #define CONFIG_SYS_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) 411 #define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) 412 #define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U 413 414 /* 415 * BAT1 1G Cache-inhibited, guarded 416 * 0x8000_0000 512M PCI-Express 1 Memory 417 * 0xa000_0000 512M PCI-Express 2 Memory 418 * Changed it for operating from 0xd0000000 419 */ 420 #define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \ 421 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 422 #define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP) 423 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 424 #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U 425 426 /* 427 * BAT2 512M Cache-inhibited, guarded 428 * 0xc000_0000 512M RapidIO Memory 429 */ 430 #define CONFIG_SYS_DBAT2L (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW \ 431 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 432 #define CONFIG_SYS_DBAT2U (CONFIG_SYS_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP) 433 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 434 #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U 435 436 /* 437 * BAT3 4M Cache-inhibited, guarded 438 * 0xf800_0000 4M CCSR 439 */ 440 #define CONFIG_SYS_DBAT3L ( CONFIG_SYS_CCSRBAR | BATL_PP_RW \ 441 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 442 #define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) 443 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) 444 #define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U 445 446 /* 447 * BAT4 32M Cache-inhibited, guarded 448 * 0xe200_0000 16M PCI-Express 1 I/O 449 * 0xe300_0000 16M PCI-Express 2 I/0 450 * Note that this is at 0xe0000000 451 */ 452 #define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \ 453 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 454 #define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP) 455 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 456 #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U 457 458 /* 459 * BAT5 128K Cacheable, non-guarded 460 * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) 461 */ 462 #define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) 463 #define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) 464 #define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L 465 #define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U 466 467 /* 468 * BAT6 32M Cache-inhibited, guarded 469 * 0xfe00_0000 32M FLASH 470 */ 471 #define CONFIG_SYS_DBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ 472 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 473 #define CONFIG_SYS_DBAT6U ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) 474 #define CONFIG_SYS_IBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) 475 #define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U 476 477 #define CONFIG_SYS_DBAT7L 0x00000000 478 #define CONFIG_SYS_DBAT7U 0x00000000 479 #define CONFIG_SYS_IBAT7L 0x00000000 480 #define CONFIG_SYS_IBAT7U 0x00000000 481 482 /* 483 * Environment 484 */ 485 #ifndef CONFIG_SYS_RAMBOOT 486 #define CONFIG_ENV_IS_IN_FLASH 1 487 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x60000) 488 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ 489 #define CONFIG_ENV_SIZE 0x2000 490 #else 491 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 492 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 493 #define CONFIG_ENV_SIZE 0x2000 494 #endif 495 496 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 497 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 498 499 500 /* 501 * BOOTP options 502 */ 503 #define CONFIG_BOOTP_BOOTFILESIZE 504 #define CONFIG_BOOTP_BOOTPATH 505 #define CONFIG_BOOTP_GATEWAY 506 #define CONFIG_BOOTP_HOSTNAME 507 508 509 /* 510 * Command line configuration. 511 */ 512 #include <config_cmd_default.h> 513 514 #define CONFIG_CMD_PING 515 #define CONFIG_CMD_I2C 516 #define CONFIG_CMD_REGINFO 517 518 #if defined(CONFIG_SYS_RAMBOOT) 519 #undef CONFIG_CMD_ENV 520 #endif 521 522 #if defined(CONFIG_PCI) 523 #define CONFIG_CMD_PCI 524 #define CONFIG_CMD_SCSI 525 #define CONFIG_CMD_EXT2 526 #define CONFIG_CMD_USB 527 #endif 528 529 530 #undef CONFIG_WATCHDOG /* watchdog disabled */ 531 532 /* 533 * Miscellaneous configurable options 534 */ 535 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 536 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 537 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 538 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 539 540 #if defined(CONFIG_CMD_KGDB) 541 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 542 #else 543 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 544 #endif 545 546 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 547 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 548 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 549 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 550 551 /* 552 * For booting Linux, the board info and command line data 553 * have to be in the first 8 MB of memory, since this is 554 * the maximum mapped by the Linux kernel during initialization. 555 */ 556 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 557 558 /* 559 * Internal Definitions 560 * 561 * Boot Flags 562 */ 563 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 564 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 565 566 #if defined(CONFIG_CMD_KGDB) 567 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 568 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 569 #endif 570 571 /* 572 * Environment Configuration 573 */ 574 575 /* The mac addresses for all ethernet interface */ 576 #if defined(CONFIG_TSEC_ENET) 577 #define CONFIG_ETHADDR 00:E0:0C:00:00:01 578 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD 579 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD 580 #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD 581 #endif 582 583 #define CONFIG_HAS_ETH0 1 584 #define CONFIG_HAS_ETH1 1 585 #define CONFIG_HAS_ETH2 1 586 #define CONFIG_HAS_ETH3 1 587 588 #define CONFIG_IPADDR 192.168.1.100 589 590 #define CONFIG_HOSTNAME unknown 591 #define CONFIG_ROOTPATH /opt/nfsroot 592 #define CONFIG_BOOTFILE uImage 593 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 594 595 #define CONFIG_SERVERIP 192.168.1.1 596 #define CONFIG_GATEWAYIP 192.168.1.1 597 #define CONFIG_NETMASK 255.255.255.0 598 599 /* default location for tftp and bootm */ 600 #define CONFIG_LOADADDR 1000000 601 602 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 603 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 604 605 #define CONFIG_BAUDRATE 115200 606 607 #define CONFIG_EXTRA_ENV_SETTINGS \ 608 "netdev=eth0\0" \ 609 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 610 "tftpflash=tftpboot $loadaddr $uboot; " \ 611 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 612 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 613 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 614 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 615 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 616 "consoledev=ttyS0\0" \ 617 "ramdiskaddr=2000000\0" \ 618 "ramdiskfile=your.ramdisk.u-boot\0" \ 619 "fdtaddr=c00000\0" \ 620 "fdtfile=mpc8641_hpcn.dtb\0" \ 621 "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ 622 "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ 623 "maxcpus=2" 624 625 626 #define CONFIG_NFSBOOTCOMMAND \ 627 "setenv bootargs root=/dev/nfs rw " \ 628 "nfsroot=$serverip:$rootpath " \ 629 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 630 "console=$consoledev,$baudrate $othbootargs;" \ 631 "tftp $loadaddr $bootfile;" \ 632 "tftp $fdtaddr $fdtfile;" \ 633 "bootm $loadaddr - $fdtaddr" 634 635 #define CONFIG_RAMBOOTCOMMAND \ 636 "setenv bootargs root=/dev/ram rw " \ 637 "console=$consoledev,$baudrate $othbootargs;" \ 638 "tftp $ramdiskaddr $ramdiskfile;" \ 639 "tftp $loadaddr $bootfile;" \ 640 "tftp $fdtaddr $fdtfile;" \ 641 "bootm $loadaddr $ramdiskaddr $fdtaddr" 642 643 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 644 645 #endif /* __CONFIG_H */ 646