UPSTREAM: dm: core: Add address translation in fdt_get_resource

Today of_address_to_resource() is called only in
ofnode_read_resource() for livetree support and
fdt_get_resource() is called when liv

UPSTREAM: dm: core: Add address translation in fdt_get_resource

Today of_address_to_resource() is called only in
ofnode_read_resource() for livetree support and
fdt_get_resource() is called when livetree is not supported.

The fdt_get_resource() doesn't do the address translation
so when it is required, but the address translation is done
by ofnode_read_resource() caller, for example in
drivers/firmware/scmi/smt.c::scmi_dt_get_smt_buffer() {
...
ret = ofnode_read_resource(args.node, 0, &resource);
if (ret)
return ret;

faddr = cpu_to_fdt32(resource.start);
paddr = ofnode_translate_address(args.node, &faddr);
...

The both behavior should be aligned and the address translation
must be called in fdt_get_resource() and removed for each caller.

Change-Id: Ic4a3a19fe7401fc21e446793f453bbc1a8ab4001
Fixes: a44810123f9e ("dm: core: Add dev_read_resource() to read device resources")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Xuhui Lin <xuhui.lin@rock-chips.com>

show more ...

dm: scmi: add build control for scmi smccc and clk

There are not scmi clk and smccc agent available for SPL/TPL.

But in SPL/TPL, we still need smccc agent driver to trigger
scmi uclass to setup it'

dm: scmi: add build control for scmi smccc and clk

There are not scmi clk and smccc agent available for SPL/TPL.

But in SPL/TPL, we still need smccc agent driver to trigger
scmi uclass to setup it's all protocols, then there should be
a fake plat-specific scmi clk implementation to take over the
clk get/set operation from clk_scmi.c.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: Ia0ebfa96b2aa6318083ddcd868af9381c74fb80c

show more ...

firmware: scmi: fix null ofnode

Use exist ofnode but not offset for binding, otherwise
the device_bind() would create a null ofnode to bind
while oflive is activated.

Signed-off-by: Joseph Chen <ch

firmware: scmi: fix null ofnode

Use exist ofnode but not offset for binding, otherwise
the device_bind() would create a null ofnode to bind
while oflive is activated.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I780fab83aff55e13665215c05f7e86de198a80b8

show more ...

scmi: smt: fix error of get smt buffer

1. Don't translate resource.start.
2. Use 4k-aligned address to config smt_buffer's mmu region.

Change-Id: I15f4aa6dfbe05ae1a424132cd1c8b3a5e28b7a06
Signed-of

scmi: smt: fix error of get smt buffer

1. Don't translate resource.start.
2. Use 4k-aligned address to config smt_buffer's mmu region.

Change-Id: I15f4aa6dfbe05ae1a424132cd1c8b3a5e28b7a06
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>

show more ...

firmware: scmi: fix compile error after backport

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I603faeb2a13a45a324ba5b0880d3c2cf6ae3770e

UPSTREAM: firmware: scmi: Include device_compat.h

This header is necessary for the dev_xxx macros.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

(che

UPSTREAM: firmware: scmi: Include device_compat.h

This header is necessary for the dev_xxx macros.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

(cherry picked from commit 66e7348fe7cbd40091dad017363f0d788ea69739)
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I8e225067f8a4204e0306d307914a547d2a66270d

show more ...

UPSTREAM: reset: add reset controller driver for SCMI agents

This change introduces a reset controller driver for SCMI agent devices.
When SCMI agent and SCMI reset domain drivers are enabled, SCMI

UPSTREAM: reset: add reset controller driver for SCMI agents

This change introduces a reset controller driver for SCMI agent devices.
When SCMI agent and SCMI reset domain drivers are enabled, SCMI agent
binds a reset controller device for each SCMI reset domain protocol
devices enabled in the FDT.

SCMI reset driver is embedded upon CONFIG_RESET_SCMI=y. If enabled,
CONFIG_SCMI_AGENT is also enabled.

SCMI Reset Domain protocol is defined in the SCMI specification [1].

Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Conflicts:
drivers/reset/Kconfig
drivers/reset/Makefile

(cherry picked from commit 34d76fefb2667d0ca138ff4fcf8bc8443032449f)
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I8c6dd9bb49e58cd9df9a67c1cd101d8da27f3691

show more ...

UPSTREAM: clk: add clock driver for SCMI agents

This change introduces a clock driver for SCMI agent devices. When
SCMI agent and SCMI clock drivers are enabled, SCMI agent binds a
clock device for

UPSTREAM: clk: add clock driver for SCMI agents

This change introduces a clock driver for SCMI agent devices. When
SCMI agent and SCMI clock drivers are enabled, SCMI agent binds a
clock device for each SCMI clock protocol devices enabled in the FDT.

SCMI clock driver is embedded upon CONFIG_CLK_SCMI=y. If enabled,
CONFIG_SCMI_AGENT is also enabled.

SCMI Clock protocol is defined in the SCMI specification [1].

Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Conflics:
drivers/clk/Kconfig
drivers/clk/Makefile

(cherry picked from commit 60388844836f5639e6c9a4331335ff22298128da)
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I2063cff170f75be6edb169619c7321a07051583c

show more ...

UPSTREAM: firmware: scmi: support Arm SMCCC transport

This change implements a SMCCC transport for SCMI exchanges. This
implementation follows the Linux kernel as references implementation
for SCMI

UPSTREAM: firmware: scmi: support Arm SMCCC transport

This change implements a SMCCC transport for SCMI exchanges. This
implementation follows the Linux kernel as references implementation
for SCMI message processing, using the SMT format for communication
channel meta-data.

Use of SMCCC transport in SCMI FDT bindings are defined in the Linux
kernel DT bindings since v5.8. SMCCC with SMT is implemented in OP-TEE
from tag 3.9.0 [2].

Links: [2] https://github.com/OP-TEE/optee_os/commit/a58c4d706d23
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

(cherry picked from commit 1e35913a2677b1d0511769425a53cd9ae113c238)
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I3f1f28405b00578695087bd0a1b51f1d0e0183f6

show more ...

UPSTREAM: firmware: scmi: mailbox/smt agent device

This change implements a mailbox transport using SMT format for SCMI
exchanges. This implementation follows the Linux kernel and
SCP-firmware [1] a

UPSTREAM: firmware: scmi: mailbox/smt agent device

This change implements a mailbox transport using SMT format for SCMI
exchanges. This implementation follows the Linux kernel and
SCP-firmware [1] as references implementation for SCMI message
processing using SMT format for communication channel meta-data.

Use of mailboxes in SCMI FDT bindings are defined in the Linux kernel
DT bindings since v4.17.

Links: [1] https://github.com/ARM-software/SCP-firmware
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

(cherry picked from commit 240720e9052fa7459e4d8a46d508db1ae41ed238)
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I02ed9ea6925d9d90e8b46deecd9137ed78172f94

show more ...

UPSTREAM: firmware: add SCMI agent uclass

This change introduces SCMI agent uclass to interact with a firmware
using the SCMI protocols [1].

SCMI agent uclass currently supports a single method to

UPSTREAM: firmware: add SCMI agent uclass

This change introduces SCMI agent uclass to interact with a firmware
using the SCMI protocols [1].

SCMI agent uclass currently supports a single method to request
processing of the SCMI message by an identified server. A SCMI message
is made of a byte payload associated to a protocol ID and a message ID,
all defined by the SCMI specification [1]. On return from process_msg()
method, the caller gets the service response.

SCMI agent uclass defines a post bind generic sequence for all devices.
The sequence binds all the SCMI protocols listed in the FDT for that
SCMI agent device. Currently none, but later change will introduce
protocols.

This change implements a simple sandbox device for the SCMI agent uclass.
The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages.
To prepare for further test support, the sandbox exposes a architecture
function for test application to read the sandbox emulated devices state.
Currently supports 2 SCMI agents, identified by an ID in the FDT device
name. The simplistic DM test does nothing yet.

SCMI agent uclass is designed for platforms that embed a SCMI server in
a firmware hosted somewhere, for example in a companion co-processor or
in the secure world of the executing processor. SCMI protocols allow an
SCMI agent to discover and access external resources as clock, reset
controllers and more. SCMI agent and server communicate following the
SCMI specification [1]. This SCMI agent implementation complies with
the DT bindings defined in the Linux kernel source tree regarding
SCMI agent description since v5.8.

Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Conflicts:
arch/sandbox/dts/test.dts
configs/sandbox_defconfig
drivers/firmware/Kconfig
drivers/firmware/Makefile
test/dm/Makefile

(cherry picked from commit 358599efd827b0ee48af864537cc86facc9167c0)
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I251bf48c2bb60af041e71c5904e0eb73f0243439

show more ...