ram: stm32: migrate fmc defines in driver file

Migrate all FMC defines from arch/arm/include/asm/arch-stm32f7/fmc.h
to drivers/ram/stm32_sdram.c

This will avoid to add an additionnal arch-stm32xx/f

ram: stm32: migrate fmc defines in driver file

Migrate all FMC defines from arch/arm/include/asm/arch-stm32f7/fmc.h
to drivers/ram/stm32_sdram.c

This will avoid to add an additionnal arch-stm32xx/fmc.h file when
a new stm32 family soc will be introduced.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

serial: stm32x7: migrate serial struct to driver

This allow to remove include/dm/platform_data/serial_stm32x7.h
which was included in the past by stm32x7 driver and by
stm32f746-disco.c board file.

serial: stm32x7: migrate serial struct to driver

This allow to remove include/dm/platform_data/serial_stm32x7.h
which was included in the past by stm32x7 driver and by
stm32f746-disco.c board file.
Since patch 42bf5e7c27 "serial: stm32f7: add device tree support"
this file is no more needed in board file.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vikas MANOCHA <vikas.manocha@st.com>

show more ...

spl: stm32f7: configure for xip booting

With xip booting configuration, we don't need to copy the next image
(U-Boot or linux xipimage) from flash to sdram area.

Flash memory organization is like t

spl: stm32f7: configure for xip booting

With xip booting configuration, we don't need to copy the next image
(U-Boot or linux xipimage) from flash to sdram area.

Flash memory organization is like this:
spl-U-Boot: u-boot-spl.bin : 0x0800_0000
U-Boot : u-boot-dtb.bin : 0x0800_8000
linux : xipImage : 0x0800_8000

It is also possible to have U-Boot binary & linux binaries configured at
different addresses of flash memory like U-Boot at 0x0800_8000 & linux
xipImage at 0x0800_4000. But in any case, spl-U-Boot needs to be compiled for
U-Boot as next binary with SPL_OS_BOOT option disabled.
By default, spl is configured to boot linux xipImage.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>

show more ...

spl: stm32f7: add kernel boot support

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>

stm32: stm32f7: add spl build support

This commit supports booting from stm32 internal nor flash. spl U-Boot
initializes the sdram memory, copies next image (e.g. standard U-Boot)
to sdram & then ju

stm32: stm32f7: add spl build support

This commit supports booting from stm32 internal nor flash. spl U-Boot
initializes the sdram memory, copies next image (e.g. standard U-Boot)
to sdram & then jumps to entry point.

Here are the flash memory addresses for U-Boot-spl & standard U-Boot:
- spl U-Boot : 0x0800_0000
- standard U-Boot : 0x0800_8000

To compile u-boot without spl: Remove SUPPORT_SPL configuration
(arch/arm/mach-stm32/Kconfig)

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
[trini: Rework Kconfig logic a bit]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

dm: gpio: Add live tree support

Add support for requesting GPIOs with a live device tree.

This involves adjusting the function signature for the legacy function
gpio_request_by_name_nodev(), so fix

dm: gpio: Add live tree support

Add support for requesting GPIOs with a live device tree.

This involves adjusting the function signature for the legacy function
gpio_request_by_name_nodev(), so fix up all callers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes to stm32f746-disco.c:
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

dm: Use dm.h header when driver mode is used

This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
present

S

dm: Use dm.h header when driver mode is used

This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
present

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

stm32f7: stm32f746-disco: read memory info from device tree

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>

stm32f746: to switch on user LED1 & read user button

All discovery boards have one user button & one user LED. Here we are
just reading the button status & switching ON the user LED.

Signed-off-by:

stm32f746: to switch on user LED1 & read user button

All discovery boards have one user button & one user LED. Here we are
just reading the button status & switching ON the user LED.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>

show more ...

stm32f7: use stm32f7 gpio driver supporting driver model

With this gpio driver supporting DM, there is no need to enable clocks
for different gpios (for pin muxing) in the board specific code.

Need

stm32f7: use stm32f7 gpio driver supporting driver model

With this gpio driver supporting DM, there is no need to enable clocks
for different gpios (for pin muxing) in the board specific code.

Need to increase the allocatable area required before relocation from 0x400 to
0xC00 becuase of 10 new gpio devices(& new gpio class) added in device tree.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

stm32f7: use clock driver to enable sdram controller clock

This patch also removes the sdram/fmc clock enable from board specific
code.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Chris

stm32f7: use clock driver to enable sdram controller clock

This patch also removes the sdram/fmc clock enable from board specific
code.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>

show more ...

stm32f7: use driver model for sdram initialization

As driver model takes care of pin control configuraion, this patch also
removes the sdram/fmc pin configuration.

Signed-off-by: Vikas Manocha <vik

stm32f7: use driver model for sdram initialization

As driver model takes care of pin control configuraion, this patch also
removes the sdram/fmc pin configuration.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>

show more ...

stm32f7: sdram: move sdram driver code to ram drivers area

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>

ARM: DT: stm32f7: add qspi pin contol node

It also removes the qspi pin configuration done during the
board initialization.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>

ARM: DT: stm32f7: add ethernet pin contol node

It also removes the ethernet pin configuration done during the board
initialization.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>

ARM: DT: stm32f7: add pin control node for serial port pins

And remove the uart pin configuration from board initialization.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>

stm32f7: clk: remove usart1 clock enable from board init

Before clock driver availability it was required to enable usart1 clock
for serial init but now with clock driver is taking care of usart1 cl

stm32f7: clk: remove usart1 clock enable from board init

Before clock driver availability it was required to enable usart1 clock
for serial init but now with clock driver is taking care of usart1 clock.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>

show more ...

serial: stm32f7: add device tree support

This patch adds device tree support for stm32f7 serial driver & removes serial
platform data structure.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>

serial: stm32f7: add device tree support

This patch adds device tree support for stm32f7 serial driver & removes serial
platform data structure.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

ARM: SPI: stm32: add stm32f746 qspi driver

This patch adds support for the QSPI IP found in stm32f7 devices.

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>

net: stm32: add designware mac glue code for stm32

This patch adds glue code required for enabling the designware
mac on stm32f7 devices.

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by

net: stm32: add designware mac glue code for stm32

This patch adds glue code required for enabling the designware
mac on stm32f7 devices.

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

ARM: stm32: use clock setup function defined in clock.c

Use the clock setup function defined in clock.c instead of setting the
clock bits directly in the drivers.
Remove register definitions of RCC

ARM: stm32: use clock setup function defined in clock.c

Use the clock setup function defined in clock.c instead of setting the
clock bits directly in the drivers.
Remove register definitions of RCC in rcc.h as these are already
defined in the struct in stm32.h

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>

show more ...

ARM: stm32: cleanup stm32f7 files

Cleanup stm32f7 files:
- use BIT macro
- use GENMASK macro
- use rcc struct instead of macro additions

Add missing stm32f7 register in rcc struct

Signed-off-by: M

ARM: stm32: cleanup stm32f7 files

Cleanup stm32f7 files:
- use BIT macro
- use GENMASK macro
- use rcc struct instead of macro additions

Add missing stm32f7 register in rcc struct

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by: Vikas MANOCHA<vikas.manocha@st.com>

show more ...

Revert "stm32: Change USART port to USART6 for stm32f746 discovery board"

Per Vikas' request, the problem this commit is supposed to be solving is
something he doesn't see and further this introduce

Revert "stm32: Change USART port to USART6 for stm32f746 discovery board"

Per Vikas' request, the problem this commit is supposed to be solving is
something he doesn't see and further this introduces additional hardware
requirements.

This reverts commit 4b2fd720a7b2f78c42d1565edf4c67f378c65440.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

stm32: Change USART port to USART6 for stm32f746 discovery board

This change is to remove a halt at about 200KiB
while sending a large(1MiB) binary to a micro controller using USART1.
USART1 is conn

stm32: Change USART port to USART6 for stm32f746 discovery board

This change is to remove a halt at about 200KiB
while sending a large(1MiB) binary to a micro controller using USART1.
USART1 is connected to a PC via an on-board ST-Link debugger
that also functions as a USB-Serial converter.
However, it seems to loss some data occasionally.
So I changed the serial port to USART6 and connected it to the PC using
an FTDI USB-Serial cable, therefore the transmission was successfully
completed.

Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>

show more ...