arm: Add explicit include of <asm/mach-types.h>Rather than relying on common.h to provide this include, which is goingaway at some point, include it explicitly in each file.Signed-off-by: Simon
arm: Add explicit include of <asm/mach-types.h>Rather than relying on common.h to provide this include, which is goingaway at some point, include it explicitly in each file.Signed-off-by: Simon Glass <sjg@chromium.org>Reviewed-by: Tom Rini <trini@konsulko.com>
show more ...
board_f: Drop setup_dram_config() wrapperBy making dram_init_banksize() return an error code we can drop thewrapper. Adjust this and clean up all implementations.Signed-off-by: Simon Glass <sjg@
board_f: Drop setup_dram_config() wrapperBy making dram_init_banksize() return an error code we can drop thewrapper. Adjust this and clean up all implementations.Signed-off-by: Simon Glass <sjg@chromium.org>Reviewed-by: Stefan Roese <sr@denx.de>
board: atmel: clean up peripheral clock codeDue to introducing the new peripheral clock handle functions,use these functions to reduce duplicated code.Signed-off-by: Wenyou Yang <wenyou.yang@atm
board: atmel: clean up peripheral clock codeDue to introducing the new peripheral clock handle functions,use these functions to reduce duplicated code.Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>Tested-by: Heiko Schocher <hs@denx.de>[Rebased on current master, fixup for at91rm9200ek]Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
net: Remove the bd* parameter from net stack functionsThis value is not used by the network stack and is available in theglobal data, so stop passing it around. For the one legacy functionthat s
net: Remove the bd* parameter from net stack functionsThis value is not used by the network stack and is available in theglobal data, so stop passing it around. For the one legacy functionthat still expects it (init op on old Ethernet drivers) pass in theglobal pointer version directly to avoid changing that interface.Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>Reported-by: Simon Glass <sjg@chromium.org>Reviewed-by: Simon Glass <sjg@chromium.org>Signed-off-by: Simon Glass <sjg@chromium.org>(Trival fix to remove an unneeded variable declaration in 4xx_enet.c)
ARM: at91: move board select menu and common settingsThe board select menu in arch/arm/Kconfig is still big.To slim down it, this commit moves AT91 boards toarch/arm/mach-at91/Kconfig.Also, cons
ARM: at91: move board select menu and common settingsThe board select menu in arch/arm/Kconfig is still big.To slim down it, this commit moves AT91 boards toarch/arm/mach-at91/Kconfig.Also, consolidate "config SYS_SOC" in each board Kconfig.The Kconfig files under board/ directory were modified with thefollowing command: find board -name Kconfig | xargs sed -i -e ' /config SYS_SOC/ { N /default "at91"/ { N d } } 'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Acked-by: Andreas Bießmann <andreas.devel@googlemail.co>
kconfig: arm: introduce symbol for ARM CPUsThis commit introduces a Kconfig symbol for each ARM CPU:CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,CPU_ARM1176, CPU_V7, CPU_PXA
kconfig: arm: introduce symbol for ARM CPUsThis commit introduces a Kconfig symbol for each ARM CPU:CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selectedfor CPU_ARM1176 and CPU_V7.For each target, the corresponding CPU is selected and the definition ofSYS_CPU in the corresponding Kconfig file is removed.Also, it removes redundant "string" type in some Kconfig files.Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in arch and board Kconfig files.This commit can be easily reproduced by the following command:find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string//}'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS for
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS format as in Linux Kernel would be nicebecause we can crib the scripts/get_maintainer.pl script.After some discussion, we chose to put a MAINTAINERS file under eachboard directory, not the top-level one because we want to collectrelevant information for a board into a single place.TODO:Modify get_maintainer.pl to scan multiple MAINTAINERS files.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Suggested-by: Tom Rini <trini@ti.com>Acked-by: Simon Glass <sjg@chromium.org>
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board(This commit was automatically generated by a conversion scriptbased on boards.cfg)In Linux Kernel, defconfig files are located underarch/${ARCH}/configs/ directory.It works in Linux Kernel since ARCH is always given from thecommand line for cross compile.But in U-Boot, ARCH is not given from the command line.Which means we cannot know ARCH until the board configuration is done.That is why all the "*_defconfig" files should be gathered into asingle directory ./configs/.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Acked-by: Simon Glass <sjg@chromium.org>
sizes.h - consolidate for all architecturesCopied from Linux sources "include/linux/sizes.h" commit413541dd66d51f791a0b169d9b9014e4f56be13cSigned-off-by: Alexey Brodkin <abrodkin@synopsys.com>
sizes.h - consolidate for all architecturesCopied from Linux sources "include/linux/sizes.h" commit413541dd66d51f791a0b169d9b9014e4f56be13cSigned-off-by: Alexey Brodkin <abrodkin@synopsys.com>Cc: Vineet Gupta <vgupta@synopsys.com>Cc: Tom Rini <trini@ti.com>Cc: Stefan Roese <sr@denx.de>Cc: Albert Aribaud <albert.u.boot@aribaud.net>Acked-by: Tom Rini <trini@ti.com>Acked-by: Stefan Roese <sr@denx.de>[trini: Add bcm Kona platforms to the patch]Signed-off-by: Tom Rini <trini@ti.com>
at91: nand: switch atmel_nand to generic GPIO APISigned-off-by: Andreas Bießmann <andreas.devel@googlemail.com>Acked-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de>Tested-by: Jens Schar
at91: nand: switch atmel_nand to generic GPIO APISigned-off-by: Andreas Bießmann <andreas.devel@googlemail.com>Acked-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de>Tested-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de>Acked-by: Scott Wood <scottwood@freescale.com>
board: arm: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Andreas Bießmann <andreas.devel@googlemail
board: arm: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Andreas Bießmann <andreas.devel@googlemail.com>Cc: Stefano Babic <sbabic@denx.de>Cc: Prafulla Wadaskar <prafulla@marvell.com>Cc: Minkyu Kang <mk7.kang@samsung.com>Cc: Vipin Kumar <vipin.kumar@st.com>Cc: Tom Warren <twarren@nvidia.com>Cc: Tom Rini <trini@ti.com>
Add GPL-2.0+ SPDX-License-Identifier to source filesSigned-off-by: Wolfgang Denk <wd@denx.de>[trini: Fixup common/cmd_io.c]Signed-off-by: Tom Rini <trini@ti.com>
pm9g45: init serial console before relocationThe early messages can be seen on the debug console.Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Fix Stelian's email addressChange my old email address which is no longer valid.Signed-off-by: Stelian Pop <stelian@popies.net>Signed-off-by: Anatolij Gustschin <agust@denx.de>
ARM: define CONFIG_MACH_TYPE for all ronetix boardsSigned-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>Acked-by: Igor Grinberg <grinberg@compulab.co.il>
punt unused clean/distclean targetsThe top level Makefile does not do any recursion into subdirs whencleaning, so these clean/distclean targets in random arch/board dirsnever get used. Punt them
punt unused clean/distclean targetsThe top level Makefile does not do any recursion into subdirs whencleaning, so these clean/distclean targets in random arch/board dirsnever get used. Punt them all.MAKEALL didn't report any errors related to this that I could see.Signed-off-by: Mike Frysinger <vapier@gentoo.org>
make pm9g45 buildable for v2011.06 releaseSigned-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>changed at91_serial_hw_init to at91_serial
make pm9g45 buildable for v2011.06 releaseSigned-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>changed at91_serial_hw_init to at91_seriald_hw_init
Remove volatile qualifier in get_ram_size() callsCheckpatch.pl complains about the volatile qualifier in calls toget_ram_size(). Remove this qualifier in the prototype and in thecalls where it is
Remove volatile qualifier in get_ram_size() callsCheckpatch.pl complains about the volatile qualifier in calls toget_ram_size(). Remove this qualifier in the prototype and in thecalls where it is useless, and leave it only in the function bodywhere it is needed.Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
pm9g45: ARM relocation supportSigned-off-by: Asen Dimov <dimov@ronetix.at>
Switch from archive libraries to partial linkingBefore this commit, weak symbols were not overridden by non-weak symbolsfound in archive libraries when linking with recent versions ofbinutils. A
Switch from archive libraries to partial linkingBefore this commit, weak symbols were not overridden by non-weak symbolsfound in archive libraries when linking with recent versions ofbinutils. As stated in the System V ABI, "the link editor does notextract archive members to resolve undefined weak symbols".This commit changes all Makefiles to use partial linking (ld -r) insteadof creating library archives, which forces all symbols to participate inlinking, allowing non-weak symbols to override weak symbols as intended.This approach is also used by Linux, from which the gmake functioncmd_link_o_target (defined in config.mk and used in all Makefiles) isinspired.The name of each former library archive is preserved except forextensions which change from ".a" to ".o". This commit updatesreferences accordingly where needed, in particular in some linkerscripts.This commit reveals board configurations that exclude some features butinclude source files that depend these disabled features in the build,resulting in undefined symbols. Known such cases include:- disabling CMD_NET but not CMD_NFS;- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASEThe change is currently needed to be able to remove the boardconfiguration scripting from the top level Makefile and replace it bya simple, table driven
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASEThe change is currently needed to be able to remove the boardconfiguration scripting from the top level Makefile and replace it bya simple, table driven script.Moving this configuration setting into the "CONFIG_*" name space isalso desirable because it is needed if we ever should move forward toa Kconfig driven configuration system.Signed-off-by: Wolfgang Denk <wd@denx.de>
pm9g45: fix compile warningFix warning: pm9g45.c: In function 'pm9g45_macb_hw_init': pm9g45.c:99: warning: unused variable 'pio'Signed-off-by: Wolfgang Denk <wd@denx.de>Cc: Ilko Iliev <iliev@
pm9g45: fix compile warningFix warning: pm9g45.c: In function 'pm9g45_macb_hw_init': pm9g45.c:99: warning: unused variable 'pio'Signed-off-by: Wolfgang Denk <wd@denx.de>Cc: Ilko Iliev <iliev@ronetix.at>
add new board pm9g45Add the new board PM9G45 from Ronetix GmbH.* AT91SAM9G45 MCU at 400Mhz.* 128MB DDR2 SDRAM* 256MB NAND* 10/100 MBits Ethernet DP83848* Serial number chip DS2401The board i
add new board pm9g45Add the new board PM9G45 from Ronetix GmbH.* AT91SAM9G45 MCU at 400Mhz.* 128MB DDR2 SDRAM* 256MB NAND* 10/100 MBits Ethernet DP83848* Serial number chip DS2401The board is made as SODIMM200 module.For more info www.ronatix.at or info@ronetix.at.Signed-off-by: Asen Dimov <dimov@ronetix.at>