arm: dts: rk3568: Delete dm-pre-reloc for usb controller

The usb controller node is only used for usb host mode,
and it just needs to depend on the kernel DTB, so we can
remove the dm-pre-reloc for

arm: dts: rk3568: Delete dm-pre-reloc for usb controller

The usb controller node is only used for usb host mode,
and it just needs to depend on the kernel DTB, so we can
remove the dm-pre-reloc for usb controller safely.

Change-Id: I0e7933684fedd7a9b3d9c6c261ad5964187fd9a5
Signed-off-by: William Wu <william.wu@rock-chips.com>

show more ...

dts: rockchip: rk3568: Add combphy0_us dm-pre-reloc for usb3 rockusb download

Change-Id: I7303a3d50b2cfea07b5a5429f69bd9743f07cc06
Signed-off-by: William Wu <william.wu@rock-chips.com>

rockchip: dts: add pinctrl support for spl

SPL loader can't recognize SD card sine wrong iomux.
Enable pinctrl to fix it.

Test on RK3566_EVB_LP4X_V10 board.

Signed-off-by: Zain Wang <wzz@rock-chip

rockchip: dts: add pinctrl support for spl

SPL loader can't recognize SD card sine wrong iomux.
Enable pinctrl to fix it.

Test on RK3566_EVB_LP4X_V10 board.

Signed-off-by: Zain Wang <wzz@rock-chips.com>
Change-Id: I5c70ead4be5a981fbf0a1b2377da72c362df5268

show more ...

rockchip: dts: Move secure-otp node to u-boot.dtsi

Signed-off-by: Xuhui Lin <xuhui.lin@rock-chips.com>
Change-Id: I438ac9e1a3bc07592b79e675ec1b64c8c4aff4ba

dts: rockchip: rk3568: Make spl dtb smaller

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: Ic6602c5dea963fc5280adb5912e24b25f44b828f

rockchip: dts: rk3568: Change to nand ecc mode hw

We do not need to syndrom the MTD_OPS_RAW opration with
controller ecc layout, so remove it.

Change-Id: I97251bd41ed7e33ec9f43763c9c8aa907294109f
S

rockchip: dts: rk3568: Change to nand ecc mode hw

We do not need to syndrom the MTD_OPS_RAW opration with
controller ecc layout, so remove it.

Change-Id: I97251bd41ed7e33ec9f43763c9c8aa907294109f
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

rockchip: dts: rk3568-u-boot: Add i2c0/1 node

It was tested and as a sample for the further.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: Ib1c3a33a585b2dc89c0be7993c85771a5b845fac

rockchip: dts: rk3568: Set spinand 75MHz in default

1.RK356x support 75MHz and 100MHz SFC sclk
2.The 75MHz is more compatible for most spinand devices

Change-Id: Ibcffabc7203c6db4e35d9b0b813093c665

rockchip: dts: rk3568: Set spinand 75MHz in default

1.RK356x support 75MHz and 100MHz SFC sclk
2.The 75MHz is more compatible for most spinand devices

Change-Id: Ibcffabc7203c6db4e35d9b0b813093c66532fedf
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

rockchip: dts: enable psci node

In order to bind psci-sysreset driver if no kernel dtb.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I93c3d08b6113ba9d7c49a4500c69854879554b5b

rockchip: dts: rk3568: add rng node and enable

Change-Id: Ie58d30776facf7f2bd6060fad06c4cbb53727e68
Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>

rockchip: dts: rk3568: set the sdmmc0-det pin pcfg_pull_up

Since the sdmmc0-det is set to pcfg_pull_none and there is no sd
card, it has a current loss of 2 mA.

Signed-off-by: Jason Zhu <jason.zhu@

rockchip: dts: rk3568: set the sdmmc0-det pin pcfg_pull_up

Since the sdmmc0-det is set to pcfg_pull_none and there is no sd
card, it has a current loss of 2 mA.

Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Change-Id: Ifb6184d134155a39dc6986632a8346ffc342263f

show more ...

rockchip: dts: rk3568: enable pcie30 for NVMe boot

Change-Id: I2095cec09f765572101353bc21507a82ba71c160
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

arm: dts: rk3568: Add gmac node

Change-Id: Ie75274260889afa7cb5aa1b3814d691542358974
Signed-off-by: David Wu <david.wu@rock-chips.com>

rockchip: dts: rk3568: enable wdt

Change-Id: I73c34bcdd68cdd30dc07c688331ba9fa284159e7
Signed-off-by: Simon Xue <xxm@rock-chips.com>

rockchip: dts: rk3568: add secure_otp node

Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Change-Id: I67af428fbd0ae016b25a6aafc8c28d36e055d765

rockchip: dts: rk3568: support bring-up from sdmmc0

Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Change-Id: I4c36e2968f4a82e64f8583ce20270edffd9c50e3

rk3568: add nand support for spl and uboot

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Change-Id: I3b849db025ae15dde22636ae17ac2d19c5484dd6

rockchip: dts: rk3568: add and enable crypto node

Change-Id: I1ca3dc64c23663a5b30fc369f287f391d17ca3f3
Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>

rockchip: dts: rk3568: disable usb2 host by default

If we enable usb2phy1 with dm-pre-reloc in uboot and disable it
in kernel, the status of usb2phy1 will be "okay" and usb2phy1
node will be put ahe

rockchip: dts: rk3568: disable usb2 host by default

If we enable usb2phy1 with dm-pre-reloc in uboot and disable it
in kernel, the status of usb2phy1 will be "okay" and usb2phy1
node will be put ahead of usb2phy0 which leads to vbus detect
fail.

Here is the error log:
get syscon usbgrf failed
rockchip_chg_get_type: get u2phy node failed: -19

Signed-off-by: Ren Jianing <jianing.ren@rock-chips.com>
Change-Id: I16c1ddd42bf1a2e7a98fc9cdf1509a62714c8b6b

show more ...

rockchip: dts: rk3568: set emmc bus width to 8

Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Change-Id: Ifdbe8ed76caa746070c3c5cf166573ffeb8d9645

rockchip: dts: rk3568: Enable spi flash

Change-Id: I36eb3471eb82e78db1bdd7114ce2bc30166e0e68
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

dts: enable hs200 mode for rk3568

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Change-Id: Ia6108713cf09372b35bbc0ae35ca179358a83362

rockchip: dts: rk3568: update configure

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I48744f026ec967ab1053cb14041bade833121028

rockchip: dts: rk3568: add usb support

Signed-off-by: Ren Jianing <jianing.ren@rock-chips.com>
Change-Id: I4acec12353ba525873ba6771ced9e83305ef4874

rockchip: dts: rk3568: Add flash devices to sfc node

Change-Id: Icf0f4ac350dca388e91a6bf443c72422c4b95dd0
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>